KrausR KBF-1221 Ramus Single Handle Bathroom Sink Faucet User Manual

KrausR KBF-1221 Ramus Single Handle Bathroom Sink Faucet User Manual

Congratulations on the purchase of your newR Kraus plumbing fixture!

Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance or have any problems with your product:

STOP DO NOT RETURN TO STORE

Please contact our Customer Service Team1-800-775-0703 / customerservice@kraususa.com

Have the model number available and retain a copy of your receipt with purchase date for reference.

If for any reason this product does not meet your expectations, please be sure to repack this product in the original box andpackaging material to avoid damage during transit.

Prior to Installation:

• Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
• Read all instructions and safety warnings and ensure you have all tools, parts, and equipment necessary for a safe installation.
• Turn off the hot and cold water supply at the angle stops and turn on the old faucet to release any built up pressure. Remove existing faucet.
• Pre-drilled hole size requirement: 1 3/8″ (min)
• Max countertop thickness: 2 5/8

For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or Customerservice@kraususa.com

Tools Required

• Wrench

• Phillips Screwdriver

• Silicone Sealant

• Safety Goggles

• Pipe Tape

Care & Maintenance

• To keep the product clean & shining, follow the steps below:

1. Rinse with clean water & dry with a soft cloth.
   

2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
   

3. Do not use cloth with a coarse surface

4. Unscrew the aerator and clean when necessary

• This installation manual is subject to change without further notice.

Diagram and Parts List

A. Faucet Body
B. Aerator
C. Flange
D. Metal Washer
E. Lock Nut
F. Spanner Key
G. Hex Wrench

Diagram and Parts List-Lift Rod Drain

a. Waste Stopper
b. Drain Flange
c. Rubber Washer
d. Concave Washer
e. Metal Washer
f. Mounting Nut
g. Tail Pipe
h. Top Hat Washer
i. Drain Off Pole
j. Washer
k. Retaining Nut
l. Clip
m. Extender Rod
n. Thumb Screw
o. Lift Rod

Faucet Dimensions

Installer Tip:

Shut off main water supply before installing new faucet.

Drain Dimensions

Installer Tip:
Shut off main water supply before installing new drain.

Remove lock nut

Shut off the water supply. Remove the lock nut (E) from the faucet (A).

Installing the faucet

Before installation, ensure that the flange (C) is placed on the bottom of the new faucet (A). Place the faucet (A) through the hole in the sink. Secure the faucet (A) to the sink using the metal washer (D) and lock nut (E) provided. Tighten the lock nut (E) with the spanner key (F) provided. Ensure there is no interference between the metal washer (D) and hoses.

Connect waterlines to main valve

Attach waterlines to angle stops and tighten until snug. Turn on angle stops and check for leaks (DO NOT TURN FAUCET ON).

NOTE: Please make sure filter washers are installed before connecting to the main valve.

Installing the drain

Remove the waste stopper (a) and drain flange (b) from the tail pipe (g). Remove the concave washer (d), metal washer (e) and mounting nut (f) from the drain flange (b).

Insert the drain flange (b) through the drain hole with the rubber washer (c) attached. From underneath, place the concave (d) and metal washer (e) on the drain flange. Secure the mounting nut (f). Thread the tail pipe (g) onto the drain (b) and hand tighten.

Insert the waste stopper (a) into the drain flange. Remove the extender rod (m) and clip (I) from the drain off pole (i). Remove the nut (k). Insert the drain off pole (i) into the drain pole opening of the tail pipe (g). See insert 1. Secur the nut (k) to the drain off pole opening of the tail pipe ( g ).

Insert the lift rod (o) through the spout and connect with the extender rod (m). Tighten the thumb screw (n).

Attach the drain off pole (i) to the extender rod (m) with the clip (I).

Loosen the thumb screw (n) on the extender rod (m). Push down on the lift rod (o) until the stopper is in the open position. Retighten the thumb screw (n).

Flush faucet

After installing the faucet, remove the aerator (B) with a coin. Turn the water on for 30 seconds to remove any debris. Reassemble aerator (B).

Replacement Parts

*Denotes faucet component color options:
SFS – Spot Free Stainless Steel
MB – Matte Black
GM – Gunmetal
BG – Brushed Gold
SFSB – Spot Free Black Stainless
GR – Grey
BL – Black

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

button (1). Loosen setscrew (2) with hex wrench (11). Remove thehandle (3). Unscrew cap (4) (by hand only).Tighten bonnet nut (5) with an adjustablewrench.
Aerator drips or has inconsistent water flow pattern.| Aerator (7) is dirty or not seated properly.| Unscrew aerator (7) with a coin and clean out debris.
Water will not shut off completely.| Cartridge may need to be adjusted or replaced.| Remove the cover button (1). Loosen set screw (2) with hex wrench (11). Remove the handle (3). Unscrew cap (4) (by hand only). Loosen the bonnet nut (5) with an adjustable wrench. Remove the cartridge(6). Check for cracks.
There is a low flow of water.| The screen filters in the hose connectors are dirty.| Turn off the water supply at the water valves and unscrew the hose connectors from water supply lines. Clean the screens in the water lines with hot water, removing any debris or calcium build up.
There is leaking from the sink drain at the base of the sink.| The sink has a rough or irregular surface.| Apply additional silicone sealant to the beveled side of the drain flange. Retighten and test for leaks.

Codes/Standards Applicable

Faucet – Lifetime Limited Warranty

Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the

Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is non-transferable.

Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.

Kraus warrants the Faucet’s sprayhead assembly (including the engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of purchase.

Kraus warrants the Faucet’s cartridge to be free from defects in material and workmanship under normal usage for a period of five (5) years from the date of purchase.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus.

Commercial Warranty
Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of Products used in industrial, commercial and business applications.

Care and Cleaning Instructions

Certain cleaning products may cause damage to a Product’s finish and use of the following on the Product will void this warranty:

• Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
• Abrasive pads, steel wool or wire brushes

What is Not Covered

This warranty does not cover Products that were discontinued when purchased or display Products, whether such Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not cover any free gifts included with purchase.

This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application), abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance, alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the installation of bathroom and/or kitchen manufactured goods.

How to Make a Warranty Claim
If you are a consumer purchaser, please contact a Kraus Customer Service Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com

If you are a plumbing contractor or trade professional, please contact a Kraus Pro Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com

If you are an authorized partner, please contact a Partner Support Representative at:
Kraus USA Plumbing, LLC
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide your proof of purchase and a description of the problem. Shipping charges will be covered for the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply).
International shipping fees are not included.

Limitation on Duration of Implied Warranties

Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. T O THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS WARRANTY, WHICHEVER IS SHORTER.

Limitation of Special, Incidental or Consequential Damages
Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND KRAUS USA PLUMBING, LLC SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES TO REPAIR, REPLACE, INSTALL OR REMOVE THIS PRODUCT), WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.

This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province.

Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance

IMPORTANT

Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information

REGISTER TODAY
http://www.kraususa.com/registration

www.kraususa.com

References

• Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
• Care & Maintenance | Well-crafted products | Light maintenance.
• Kraus USA Self Help

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>