Flextool FDU-D2 Drive Unit Instruction Manual
- June 1, 2024
- Flextool
Table of Contents
Flextool FDU-D2 Drive Unit Instruction Manual
FDU-D2 Flextool Drive Unit
Engine & Coupling
| Item No. | Product Code | Description | Qty | Remarks |
|---|---|---|---|---|
| 1 | NPS01710-UNIT | YAN ENGINE YANMAR L48N5 (RECOIL START) | 1 | |
| 2 | NPS02891-UNIT | FLX LIFTING HOOK (CNVR3-010) | 1 | |
| 3 | See Remarks | FLX SPACER (CNVR1-006) | 1 | Use SK-1 |
| 4 | NPS00779-UNIT | FLX KEY (CNVR1-007) | 1 | |
| 5 | See Remarks | FLX GRUB SCREW (CNVR1-008) | 2 | Use SK-1 |
| 6 | See Remarks | FLX DRIVE DOG (CNVR1-009) | 1 | Use SK-1 |
| 7 | See Remarks | FLX ROLL PIN (CNVR1-011) | 1 | Use AS-1 or SK-2 |
| 8 | See Remarks | FLX BELL HOUSING (CNVR1-012) | 1 | Use AS-1 |
| 9 | See Remarks | FLX TRIGGER SPRING (CNVR1-013) | 1 | Use AS-1 or SK-2 |
| 10 | NPS01581-UNIT | FLX SOCKET HEAD CAP SCREW (CNVR3-015) | 4 | |
| 11 | See Remarks | FLX TRIGGER (CNVR1-014) | 1 | Use AS-1 or SK-2 |
Engine & Coupling – Assembly / Service Kits
| Item No. | Product Code | Description | Qty | Remarks |
|---|---|---|---|---|
| AS-1 | NPS03374-UNIT | FLX ASSY BELL HOUSING (CNVR3-017) | 1 | Inc Items: 7, 8, 9, |
11
SK-1| NPS07161-UNIT| FLX SERVICE KIT DRIVE DOG GX160-QX (CNVR3-016)| 1| Inc
Items: 3, 5, 6
SK-2| NPS07159-UNIT| FLX SERVICE KIT TRIGGER (CNVR3-019)| 1| Inc Items: 7, 9,
11
Frame & Engine Mount
| Item No. | Product Code | Description | Qty | Remarks |
|---|---|---|---|---|
| 12 | NPS03047-UNIT | FLX DRIVE UNIT FRAME FDU-D2 / DE2 (CNVR6A-007) | 1 | |
| 13 | See Remarks | FLX NYLOCK NUT (CNVR4A-001) | 8 | Use SK-3 |
| 14 | See Remarks | FLX FLAT WASHER (CNVR4A-002) | 8 | Use SK-3 |
| 15 | See Remarks | FLX RUBBER MOUNT (CNVR4A-005) | 4 | Use SK-3 |
| 16 | See Remarks | FLX NYLOCK NUT (CNVR6A-001) | 4 | Use SK-4 |
| 17 | See Remarks | FLX FLAT WASHER (CNVR6A-002) | 4 | Use SK-4 |
| 18 | See Remarks | FLX BOLT (CNVR6A-004) | 4 | Use SK-4 |
| 19 | NPS09081-UNIT | FLX ENGINE MOUNTING PLATE (CNVR5A-003) | 1 |
Frame & Engine Mount – Assembly / Service Kits
| Item No. | Product Code | Description | Qty | Remarks |
|---|---|---|---|---|
| SK-3 | NPS01579-UNIT | FLX SERVICE KIT RUBBER MOUNT FDU (CNVR2-020) | 1 | Inc |
Items: 13 – 14
SK-4| NPS03048-UNIT| FLX SERVICE KIT BOLT SET FDU (CNVR6A-008)| 1| Inc Items:
16 – 17
Parchem Construction Supplies Pty Ltd
1956 Dandenong Road, Clayton VIC 3168, Australia
Phone: 1300 353 986
flextool.com.au
ABN 80 069 961 968
This manual summarizes our best knowledge of the product based on the
information available at the time of publication. You should read this manual
carefully and consider the information in the context of how the product will
be used. Our responsibility for products sold is subject to our standard terms
and conditions of sale.
DISCLAIMER:
Any advice, recommendation, information, assistance or service provided by us
in this manual is given in good faith and is believed by us to be appropriate
and reliable.
However, any advice, recommendation, information, assistance or service
provided by us is provided without liability or responsibility PROVIDED THAT
the foregoing shall not exclude, limit, restrict or modify the right
entitlements and remedies conferred upon any person or the liabilities imposed
upon us by any condition or warranty implied by Commonwealth, State or
Territory Act or ordinance void or prohibiting such exclusion limitation or
modification. The product can be expected to perform as indicated in this
manual so long as operation and operational procedures of the individual
products are followed as recommended in this manual.
Design and technical specifications may be subject to changes.
© This publication is copyright. All rights are reserved. Flextool is a
registered trade mark of Parchem Construction Supplies Pty Ltd.
FOR MORE INFORMATION
CONTACT US ON 1300 353 986 OR VISIT flextool.com.au