V I V O DESK-TOP1AC-B 63 x 32 Inches Table Top with Built In Power Strip Instruction Manual

October 30, 2023
V I V O

63” x 32” Table Top with Built-in Power Strip
Instruction Manual

DESK-TOP1AC-B 63 x 32 Inches Table Top with Built In Power Strip

SKU: DESK-TOP1AC-B
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

https://vivo-us.com/products/desk-top1ac-b

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
****| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

ASSEMBLY STEPS

STEP 1
Place Desktop Panels (A, B, C) upside down on a protective surface and insert Wooden Dowel Pins (S-C) into Middle Panel (B). Connect Right Panel (A) and Left Panel (C) to Middle Panel (B) using Wooden Dowel Pins (S-C).

STEP 2
Attach Support Bars (D) to predrilled holes in desktop assembly using ST4.2x16mm Screws (S-A) and a Phillips screwdriver.

STEP 3
Install Power Strip (F) into desktop using ST3.5x13mm Screws (S-B) and a Phillips screwdriver. Place Grommet Cover (E) into grommet hole. Cover can be used for cable management. Note: Turn on Overload Protection Switch. It will flip if power exceeds 1500W. Do not frequently flip the switch manually.

STEP 4
Place desk frame upside down on the desktop assembly. Adjust frame width to match desktop mounting holes, and secure frame to desktop assembly using hardware provided in your desk frame kit. For VIVO frames, pre-drilled holes have been included for most control panels and crank handles.
NOTE: Holes for some control panels and cranks are not pre-drilled. In this case, you must drill your own.

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 12/06/2022
REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

**** 309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
AVG. RESOLUTION TIME (within office hrs): < 15 M
Chat live with an agent!
help@vivo-us.com
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

V I V O User Manuals

Related Manuals