TEETER SC1001-0715-0 Inversion Table Storage Caddy Instruction Manual

TEETER SC1001-0715-0 Inversion Table Storage Caddy

Product Information

The Inversion Table Storage Caddy is a handy accessory that allows users to keep personal items such as water bottles, keys, phones, or eyeglasses within reach while using the Teeter Inversion Table. It can be easily assembled and installed on the left or right rear side of the A-frame. The Storage Caddy is designed specifically for use with Teeter Inversion Tables and is a registered trademark of Teeter. Please note that specifications are subject to change without notice.

Product Usage Instructions

1. Begin by assembling the Storage Caddy by attaching the hook to the notch as shown in Figure 1 of the user manual.
2. Once assembled, the Storage Caddy can be installed on the LEFT or RIGHT rear side of the A-frame of your Teeter Inversion Table.
3. To install on the LEFT side, align the hook with the hole on the left rear side of the A-frame and push it in until it clicks into place.
4. To install on the RIGHT side, align the hook with the hole on the right rear side of the A-frame and push it in until it clicks into place as shown in Figure 2 of the user manual.
5. Once installed, you can use the Storage Caddy to keep your personal items within reach while using your Teeter Inversion Table.
6. Always ensure that your personal items are securely placed in the Storage Caddy to prevent them from falling during inversion therapy.
7. When not in use, remove the Storage Caddy from your Teeter Inversion Table and store it in a safe place.

Note: Always read and follow the instructions provided with your Teeter Inversion Table before use.

Inversion Table Storage Caddy

WARNING

• DO NOT place heavy objects or rest your body weight on the product.
• DO NOT insert uncovered cups of hot liquid – if the liquid spills, you could be burned.

With the Storage Caddy, you can keep personal items like your water bottle, keys, phone or eyeglasses within reach while using your Teeter Inversion Table!

How to Assemble

• On the LEFT outside of the inversion table A-frame, with the logo on the Storage Caddy facing outwards, seat the hooked notch over the bolt that joins the Spreader Arm and FRONT A-frame leg (Figure 1).
  Alternatively, the Storage Caddy can be installed on the RIGHT, the REAR side of the A-frame.

• Gently press down so that the entire Storage Caddy hook is resting on the Spreader Arm (Figure 2).

• Check that the Storage Caddy is stable and installed on the outside of the A-frame so that it does not interfere with the operation of the inversion table.

• Before folding the inversion table for storage, remove the Storage Caddy to allow the Spreader Arms to fold up.

Teeter and Teeter’s logo are registered trademarks of Teeter. Specifications subject to change without notice. © COPYRIGHT 2015 Teeter. International Law Prohibits Any Copying. SC1001 0715-0

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>