V I V O MOUNT-M-FD27 Flip Down Ceiling TV and Monitor Mount Instruction Manual

: October 30, 2023
: V I V O

Table of Contents

MOUNT-M-FD27 Flip Down Ceiling TV and Monitor Mount
PACKAGE CONTENTS
ASSEMBLY STEPS
Documents / Resources

MOUNT-M-FD27 Flip Down Ceiling TV and Monitor Mount
Instruction Manual

MOUNT-M-FD27 Flip Down Ceiling TV and Monitor Mount

SKU: MOUNT-M-FD27
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - Qr
Code https://vivo- us.com/products/mount-m-fd27

GET IN TOUCH
Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

PACKAGE CONTENTS

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - PACKAGE
CONTENTS

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR CEILING CONSTRUCTION. USE WOOD STUDS TO MOUNT. We include mounting for concrete ceilings as well. If unsure, please contact us at vivo-us.com, email at help@vivo- us.com, or call us at 309-278-5303.
TOOLS NEEDED

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount -
TOOLS

DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 1
Remove screws connecting VESA Plate (A1) to Mount (A) using 4mm Allen Wrench (T-A).

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount -
ASSEMBLY

STEP 2
Slide the arm on Mount (A) down to release the lock, and unfold Mount (A).

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - ASSEMBLY
1

STEP 3

OPTION A: Wood Beam Ceiling
Rotate Mount (A) to expose the front and back mounting holes. Hold it in place along the stud (use of a stud finder is recommended) and mark pilot holes with a pencil. Drill 2.2” (55mm) deep
holes using a 3/16” (4.5mm) drill bit. Insert ST6.3x55mm Screw (W-A) into the front hole, leaving 4mm of thread exposed.| OPTION B: Concrete Ceiling
Hold Mount (A) to mounting surface and mark pilot holes with a pencil. Drill 2.4” (60mm) deep
holes using a 3/8” (10mm) drill bit. Insert Concrete Anchors (W-B). Insert ST6.3x55mm Screws
(W-A) into front two holes, leaving 4mm of thread exposed.
---|---
V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - Wood Beam
Ceiling | V I V O
MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - Concrete
Ceiling

STEP 4

OPTION A: Wood Beam Ceiling
Slide Mount (A) onto ST6.3x55mm Screw (W-A). Insert ST6.3x55mm Screw (W-A) with M6 Washer (W-C) into the back hole. Tighten both screws with a Phillips screwdriver, and swivel Mount (A) back into place.| OPTION B: Concrete Ceiling
Slide Mount (A) onto front two ST6.3x55mm Screws. Insert ST6.3x55mm Screws (W-A) with M6
Washers (W-C) into back two holes. Tighten all screws with a Phillips screwdriver.
---|---
V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - Wood Beam
Ceiling 1 |

STEP 5
With TV laying face down on a flat surface, place VESA Plate (A1) on back. Make sure arrow is pointing towards the top of the TV. Secure VESA Plate (A1) in place using Screws (M-A or M-B) and M5 Washers (M-C). Tighten using a Philips screwdriver.

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - Philips
screwdriver

STEP 6
Loosen the screws on the sides of Mount (A) using 4mm Allen Wrench (T-A) to adjust the height, then retighten. Hang VESA Plate (A1) with TV on Mount (A).

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount -
Mount

STEP 7
Secure VESA Plate (A1) to Mount (A) using the previously removed screws from STEP 1 and tighten using 4mm Allen Wrench (T-A).

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - Secure VESA
Plate

STEP 8
Fold the arm on Mount (A) up an slide the TV forward to lock it into place. Reverse this process to unlock and lower the TV.

V I V O MOUNT M FD27 Flip Down Ceiling TV and Monitor Mount - arm on
Mount

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
LAST UPDATED: 06/09/2022
REV1

Documents / Resources

| V I V O MOUNT-M-FD27 Flip Down Ceiling TV and Monitor Mount [pdf] Instruction Manual
MOUNT-M-FD27, MOUNT-M-FD27 Flip Down Ceiling TV and Monitor Mount, MOUNT-M-FD27 Flip Down Ceiling TV, Flip Down Ceiling TV, Flip Down Ceiling TV and Monitor Mount, Monitor Mount, Mount
---|---