etac H20 B110 L185 Comfort Wedge Wheelchair Instruction Manual
- October 30, 2023
- Etac
Table of Contents
etac H20 B110 L185 Comfort Wedge Wheelchair
Product Information
The product is a set of comfort wedges and contour add-ons designed to improve
the comfort and support of the user’s body.
The product is available in three sizes: H20 B110 L185, H25 B175 L200, and H20
B90 L130.
It comes with assembly instructions and can be easily installed by following
the provided guidelines.
Product Usage
- Start by unpacking the product and identifying all the parts.
- Refer to the assembly instructions to identify the correct parts and their placement.
- Assemble the comfort wedge pair by connecting the two wedges using the provided connectors (4A and 4B).
- Attach the contour add-ons to the comfort wedge pair using the provided connectors (3A and 3B).
- Place the assembled product on a flat surface with the wider end of the wedge facing the headrest.
- Lie down on the product with your back on the wedge and your legs on the floor.
- Adjust the position of the wedges and contour add-ons as per your comfort and body shape.
- Enjoy the improved comfort and support provided by the product.
Note: The product should not be used as a substitute for medical treatment or advice. If you have any medical condition or concerns, consult your healthcare provider before using the product.
Assembly instructions
-
Etac Supply Center AB
-
Långgatan 12
-
SE-334 33 Anderstorp
Documents / Resources
| etac
H20 B110 L185 Comfort Wedge
Wheelchair
[pdf] Instruction Manual
Prio 3D, Wigkussens model 1, Prio 3A Standard, 28139, 28140, 28030, 75299.3,
H20 B110 L185, H20 B110 L185 Comfort Wedge Wheelchair, Comfort Wedge
Wheelchair, Wedge Wheelchair, Wheelchair
---|---