dji MAVIC 3M Fly More Combo Drone Camera User Guide
- June 10, 2024
- DJi
Table of Contents
MAVIC 3M Fly More Combo Drone Camera
User Guide
Aircraft
DJI™ MAVIC™ 3M features both an Infrared Sensing System and Upward, Downward, and Horizontal Omnidirectional Vision Systems, allowing for hovering and flying indoors as well as outdoors and for automatic Return to Home while avoiding obstacles in all directions.
- The built-in DJI AirSense system senses nearby aircraft in the surrounding airspace to ensure safety. With a precise three-axis gimbal to stabilize the highperformance multi-camera payload, the DJI PILOT™ 2 app can be
used to view in real-time from the RGB and multispectral cameras. The RTK module provides data for centimeter-level precision positioning accuracy.
** At the same time, the spectral sunlight sensor on top of the aircraft detects solar irradiance in real-time for imaging compensation, maximizing the accuracy of collected multispectral data and improving efficiency for agriculture missions and environmental monitoring.
- Gimbal and Camera
- Horizontal Omnidirectional Vision System
- RTK Module
- Auxiliary Bottom Light
- Downward Vision System
- Infrared Sensing System
- Front LEDs
- Motors
- Propellers
- Aircraft Status Indicators
- Landing Gears (built-in antennas)
- Upward Vision System
- USB-C Port
- microSD Card Slot
- Battery Level LEDs
- Intelligent Flight Battery
- Power Button
- Battery Buckles
- Spectral Sunlight Sensor
- The vision and infrared sensing systems are affected by the surrounding conditions.
Read the User Manual for more information.
** This should be used with Network RTK service, a DJI D-RTK 2 High Precision GNSS Mobile Station (purchased additionally) or post-processed kinematic (PPK) data
(recommended when RTK signal is weak during operations).
Remote Controller
The DJI RC Pro Enterprise remote controller features O3 Enterprise, the latest
version of DJI’s signature OCUSYNC™ image transmission technology, and can
transmit a live HD view from the camera of the aircraft at a distance of up to
15 km*. The remote controller has a wide range of aircraft and gimbal controls
as well as customizable buttons. The built-in microphone allows recording
voice and the 5.5-in high brightness 1000 cd/m² screen boasts a resolution of
1920×1080 pixels. Users can connect to the internet via Wi-Fi and the Android
operating system comes with a variety of functions such as Bluetooth and GNSS.
- Control Sticks
- Back/Function Button
- RTH Button
- Flight Pause Button
- Flight Mode Switch
- 5D Button
- Power Button
- Confirm Button
- Touchscreen
- M4 Screw Hole
- microSD Card Slot
- USB-C Port
- Mini HDMI Port
- Microphone
- Gimbal Dial
- Record Button
- Antennas
- Status LED
- Battery Level LEDs
- Focus/Shutter Button
- Camera Settings Dial
- Air Vent
- Control Sticks Storage Slot
- Customizable C1 Button
- Speaker
- Customizable C2 Button
- Air Intake
The remote controller can reach its maximum transmission distance (FCC) in a wideopen area with no electromagnetic interference at an altitude of about 120 m (400ft).
1. Watching the Tutorials
Scan the QR code or visit DJI official website to watch the tutorial videos.
https://ag.dji.com/mavic-3-m/video
2. Charging the Battery
Charge to activate the Intelligent Flight Battery and the internal battery of
the Remote Controller before using it for the first time. 
Check battery level: press once.
Power on/off: press, then press and hold.
3. Preparing the
Aircraft
Unfold the front arms before
the rear arms. All arms and propellers must be unfolded before takeoff.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>