HUBBARDTON FORGE 390240 Post Adapter Installation Guide
- June 13, 2024
- HUBBARDTON FORGE
Table of Contents
ASSEMBLY & INSTALLATION INSTRUCTIONS
Post Adapter 390240
ASSEMBLY & INSTALLATION INSTRUCTIONS
Post Adapter 390240
CAUTION: FAILURE TO INSTALL THIS POST PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Component Parts
A Adapter
B Post (not included)
C Set Screw (3)
D Fixture (not Included)
To Install (Figure 1)
- Remove adapter (A) from the carton.
- Place adapter (A) over post (B) (not included) securing evenly with set screw (C).
- Follow fixture (D) (not included), with 2.5″ square base installation instructions to finish install.
Note: Fixture and post shown in Figure 1 are representative and are not included with the post adapter
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product. We hope you enjoy your fixture!
- Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
G34
Documents / Resources
|
HUBBARDTON FORGE 390240 Post
Adapter
[pdf] Installation Guide
G34, 390240, 390240 Post Adapter, Post Adapter, Adapter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>