Etac IMM1023 In2Sheet Mini Pad with Handles Instructions
- October 30, 2023
- Etac
Table of Contents
Etac IMM1023 In2Sheet Mini Pad with Handles
Product Information
The Etac In2Sheet is a Class 1 medical device that is designed to help move users with ease. It is an absorbent sheet with a glide area on the back and handles at the sides, which make it easier for carers to move users. The In2Sheet is available with flaps/wings and is intended for use in acute care, long-term care, and home care environments. The product is not sterile and has an expected service life of 1 to 2 years under normal use.
The device complies with the standards applicable for Class 1 products in the Medical Device Regulation (EU) 2017/745 on medical devices. The product comes with a two-year warranty on material and manufacturing defects, provided that the product is used correctly. All measurements given on illustrations and similar material are for guidance only and Etac cannot be held liable for errors and defects. If adjustments, repairs or combinations not predetermined by Etac are made, the Etac CE certification and Etac warranty will not be valid.
Product Usage Instructions
To avoid accidents and injury when moving and handling the products, please read this manual carefully.
Positioning: Position In2Sheet in the bed with the green side uppermost and the glide area facing the mattress. If using In2Sheet with flaps, fold these in under the mattress.
Use: When using In2Sheet for manual handling, the carer grasps the handles and gently pulls the user towards him/herself. The carer now bends their knee slightly and turns the user using a little weight transference.
In case of an adverse event occurred in relation to the device, incidents should be reported to your local dealer and the national competent authority in a timely manner. The local dealer will forward information to the manufacturer.
See www.etac.com
Illustrations
General
Thank you for choosing an Etac product.
To avoid accidents and injury when moving and handling the products, please
read this manual carefully.
The person described as “the user” in this “Instruction for Use” is the person
who is lying or sitting on the product. The carers are the people who
manoeuvre the product.
This symbol appears alongside the text in the manual. It draws the reader’s
attention to points at which there may be a risk to the health and safety of
the user or carer.
These products comply with the standards applicable for Class 1 products in
the Medical Device Regulation (EU) 2017/745 on medical devices.
At Etac we strive to continually improve our products and therefore we reserve
the right to make changes to products without prior warning. All measurements
given on illustrations and similar material are for guidance only and Etac
cannot be held liable for errors and defects.
The information given in this manual, including recommendations, combinations
and sizing, does not apply to special orders and modifications. If the
customer makes adjustments, repairs or uses combinations not predetermined by
Etac, the Etac CE certification and Etac warranty will not be valid. If in
doubt, please contact Etac.
Warranty: Two-year warranty on material and manufacturing defects,
provided that the product is used correctly.
Expected lifetime: The device has an expected service life of 1 to 2 years
under normal use. The service life of the device varies depending on usage
frequency, loads and how often and how it is washed.
For further information on the Etac transfer range see
www.etac.com.
In case of an adverse event occurred in relation to the device, incidents
should be reported to your local dealer and the national competent authority
in a timely manner. The local dealer will forward information to manufacturer.
Symbols in general
- Washing
- Do not bleach
- Tumbledry
- Iron
- Do not dry clean
- Medical device
- Disinfect / Wipe off
- Never leave on the floor
- Risk of sliding down
- Keep out of the sun
- Read the user manual
- Warning
- Production year, month and day
- Batch no./Lot no.
- User mass limit = maximum rated load
- The product can be scrapped according to national regulations
- Manufacturer
- CE -certification
- Keep dry
- Non sterile
- Article number
Intended use
In2Sheet is an absorbent sheet with a glide area on the back and handles at the sides, which make it easier for carers to move users. In2Sheet is also available with flaps/wings.
Intended environment
Acute care, Long-term care, Home care
Practical handling
Positioning
Position In2Sheet in the bed with the green side uppermost and the glide area
facing the mattress. If using In2Sheet with flaps, fold these in under the
mattress.
Use
When using In2Sheet for manual handling, the carer grasps the handles and
gently pulls the user towards him/herself. The carer now bends their knee
slightly and turns the user using a little weight transference.
Notice
Special features
Always check the product before use and after washing.
Never use a defective product. If the product shows signs of wear-and-tear, it
must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual handling. Etac
offers advice and training for carers.
For further information, contact Etac.
Always use the correct manual handling techniques
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual handling is smooth,
always plan the manual handling in advance.
- There is a risk that the user may slide off. Never leave the user alone on the edge of the bed.
- Never leave the product on the floor.
- Always conduct a risk assessment, and ensure that the assistive product can be used for the individual user and, in combination with other devices, that it is safe for the user and carers.
- It is recommended that the guard rail is in place when the user is left on the glide system, unless a risk assessment has found that the user can be safely left on the glide system without the need of guard rails.
- Do not use the product as a sling.
- If in any doubt – please contact Etac.
Material and cleaning
Material:
- Microfibre top side: Polyester
- Middle layer: 65% polyester/35% viscose
- Barrier: Polyurethane
- Satin: Polyester
- Handles: Nylon.
The product should be checked regularly, preferably each time it is used, and
especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself. Never use a defective product.
Washing Instruction:
Do not add fabric conditioner.
Recommended to wash the product before use.
This product can be cleaned with a solvent-free cleaning agent with a pH level between 5 and 9, or a 70% disinfection solution.
Products and accessories
Article no. : Product Description : Size (mm)
- IM4109 In2Sheet w/handles – mini W850xL900
- IM4128 In2Sheet w/handles – midi W1050xL1250
Service information
Inspection
First inspection:
- Is the packaging intact?
- Read the label on the packaging and check the article no. and product description
- Check that Short Instruction is enclosed – updated User Manual/Instruction for use can be downloaded from www.etac.com or contact your Etac Customer Service or the local dealer.
- Check the label on the product – does it include article no., product description, lot/batch no., cleaning instructions and supplier name?
Periodic Inspection:
- Make sure that your Manual transfer system always is in a perfect condition.
- After wash – always check materials, stitching, handles, buckles.
- If the product shows signs of wear and tear, it must be removed from service immediately.
Visual inspection/Check the product:
Ensure that the materials, seams, stitching, handles, buckles are
intact/faultless.
Mechanical load or stress/Test handles:
Draw hard in the handles in opposite directions and control the material,
seams and stitching. Test buckles:
Lock the buckle and draw in opposite directions, control the buckle and the
stitching.
Stability test:
Try to bend the product verify that it feels firm, stable and solid.
Test low/high friction:
Place the product on a firm surface or a bed, place your hands on the material
and test the friction by pushing your hands down into the product.
Low friction – slides effortlessly
High friction – no sliding/moving
Check:
Manual transfer aids with handles, straps and buckles:
Manual transfer aids with for sitting and lying transfer and with high or low friction:
****Production year, month and day
****The product can be scrapped in accordance with national regulations
****Read the user manual
Documents / Resources
| Etac
IMM1023 In2Sheet Mini Pad with
Handles
[pdf] Instructions
IMM1023 In2Sheet Mini Pad with Handles, IMM1023, In2Sheet Mini Pad with
Handles, Mini Pad with Handles, Pad with Handles, Handles
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>