VIDAL SASSOON VSHA2735TA Shine Envy Rotating Hot Air Styler Instructions

VIDAL SASSOON VSHA2735TA Shine Envy Rotating Hot Air Styler

Product Information

The SHINE ENVY ROTATING HOT-AIR STYLER is a versatile styling tool that allows you to dry, shape, and add volume to your hair with ease. It features a two- way motorized spinning brush with a smoothing ceramic barrel infused with keratin, which nourishes and creates a shiny, healthy-looking hair. The styler also has ionic conditioning technology that eliminates static and reduces frizz, resulting in smooth, frizz-free results.

Key Features:

• 1000 watts of styling power
• Hinged rear filter
• 2 heat/speed settings and a cool setting
• Multidirectional switches
• Unlocking switch to release the brush attachment
• Keratin Infused Technology
• 38mm soft bristle brush
• 50mm soft bristle brush
• Protective brush covers
• Ionic Conditioning

The keratin oils infused in the detachable barrels contain proteins and vitamins that protect and strengthen your hair. The ceramic coating helps maintain even heat distribution during styling, keeping your hair healthy and shiny. The ionic conditioning technology seals the hair cuticle layer, reducing static and frizz for easy manageability.

Product Usage Instructions

Before Using
Ensure you have read and understood the styling instructions provided in the instruction booklet before using the styler for the first time. Also, remove any polythene bags or packaging material from the product to prevent suffocation hazards.

Fitting & Removing the Brush Heads
To attach a brush head to the body of the hot air styler, align the guides of the two parts and press until you hear a click. To remove the brush head, press the unlocking buttons located on the sides of the hot air styler and gently pull the brush head off.

Protective Brush Covers
Protective brush covers are included for the 50mm brush head and 38mm brush head. Use these covers for protection and easy storage of the brush heads when not in use.

How to Use the SHINE ENVY ROTATING HOT-AIR STYLER

1. Ensure your hair is clean and dry before using the styler.
2. Select the appropriate brush head size based on your desired styling effect.
3. Plug in the styler and select your desired heat/speed setting. For heavily bleached or chemically treated hair, use the low heat setting.
4. Allow the styler to heat up for a few minutes.
5. Section your hair and start with a small section at a time.
6. Place the brush head close to the roots of your hair and glide it through to the ends, following the natural direction of your hair.
7. For added volume, rotate the styler while gliding through your hair.
8. Repeat steps 5-7 for each section of your hair until you achieve your desired style.
9. After use, unplug the styler and allow it to cool down before storing.

Important Safety Instructions:

• Keep the product away from children and ensure polythene bags or packaging material are not accessible to them.
• Always unplug the appliance immediately after use and before cleaning or maintenance.
• Avoid directing the hot air directly onto the skin to prevent discomfort or burns.
• If you have heavily bleached or chemically treated hair, consult your hairdresser before using heated appliances.

For more information and style tutorials, visit vssassoon.com.au.

SHINE ENVY ROTATING HOT-AIR STYLER INSTRUCTION BOOKLET
Please ensure you read & follow the styling instructions before using for the first time.

IMPORTANT SAFETY INSTRUCTIONS

• The following safety precautions should always be followed when using electrical appliances, especially when children are present in your household.
• Please read these instructions carefully & keep for future reference.
• Polythene bags over product or package may be dangerous.
• To avoid danger of suffocation, keep this wrapper away from babies & children.
• This bag is not a toy.

DANGER:

• Do not use this appliance in or near bathtubs, showers, basins or other vessels containing water – keep the appliance dry.
• When this appliance is used in a bathroom, unplug it after use given the proximity of water hazards are present even when the appliance is switched off.
• If this appliance falls into water, unplug it immediately – DO NOT REACH INTO THE WATER.
• Do not immerse the appliance into water or other liquids.
• This appliance is a burn hazard. keep appliance out of reach from young children particularly during use & cool down.
• Always place the appliance on a stand if one has been provided, or on a heat-resistant flat surface.

WARNING: Before & During Use

• Before using, always ensure that the voltage marked on the appliance is the same as your local power voltage.
• If the appliance is designed to be connected to a detachable power supply (otherwise known as a charger or adaptor), the appliance must only be used with the power supply it was sold with.
• Do not operate this appliance or disconnect from the power supply with wet hands.
• Never use this appliance at the same time as styling products such as aerosols (spray).
• Be very careful when handling this appliance as parts of it may get extremely hot.
• Do not place the appliance on any heat sensitive surfaces or near flammable materials or objects.
• Keep the cord away from heated surfaces.
• Never block the air openings of the appliance or place on a soft surface such as a bed or couch where the air openings may be blocked – keep the air openings free of lint & other debris.
• Do not cover this appliance with anything when it is switched on or hot.
• To avoid electric shock, do not drop or insert any object into an opening in this appliance.
• This is a high heat appliance. Care must be taken to avoid the hot surfaces of the appliance coming into direct contact with the skin, in particular the eyes, ears, face & neck.
• Do not use extension cord with this appliance.

WARNING: Storage & Maintenance
Always unplug the appliance immediately after use & before cleaning or maintenance. Do not wrap the power cord tightly around the appliance when storing. This causes undue strain on the power cord & protective guard. Over time, this will damage the power cord resulting in an unsafe condition to the user.

• If the power cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Do not leave the appliance unattended when plugged in or switched on.
• Always allow the appliance to cool down before storing away in a location where children cannot reach it.
• Do not store or place this appliance in a location where it can fall or be pulled into a bath or sink.
• If the power cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• Never operate this appliance if it has been dropped or damaged, or if it is not working correctly.
• If this appliance is serviced by an unqualified person this could result in an extremely hazardous situation for the user. Contact Conair Customer Service if you have any issues operating your appliance.

CAUTION:

• This appliance is not intended for use by infirm persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience & knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• Use this appliance only for its intended use & as described in this instruction booklet. This appliance is not intended for commercial use.
• Do not use any attachments other than those supplied by Conair Australia Pty Ltd.
• For additional protection, the installation of a residual current device (RCD) with a rated operating current not exceeding 30mA is advisable in the electrical current circuit supplying the bathroom – ask your installer for advice.

SHINE ENVY ROTATING HOT-AIR STYLER AMAZING CHOICE!

You’ll love the ease in drying, shaping & adding volume with this one-handed styler. With a two-way motorised spinning brush that features a smoothing ceramic barrel infused with keratin that nourishes & creates envious shine for beautifully healthy looking hair & the ionic conditioning eliminates static for smooth frizz-free results.

1. 1000 watts of styling power
2. Hinged rear filter
3. 2 heat/speed settings & a cool setting
4. Multidirectional switches
5. Unlocking switch to release the brush attachment
6. Keratin Infused Technology
7. 38mm soft bristle brush
8. 50mm soft bristle brush
9. Protective brush covers
10. Ionic Conditioning

IONIC CONDITIONING

• Many aspects of modern living, including air conditioning, contact with man-made fibers & air pollution add to the build-up of static electricity in your hair. Even simply brushing & towel-drying your hair can increase these levels. This static charge causes the scales, or cuticles of the hair, to push hair strands apart, resulting in a rough hair surface. Consequently, your hair may have a dull appearance. High levels of static charge cause your hair to become ‘flyaway’ & difficult to style.
• The advanced internal ionic generator conditions hair by emitting negative ions to reduce static, leaving your hair silky & shiny with reduced frizz.

KERATIN INFUSED TECHNOLOGY
The keratin oils infused in the detachable barrels contain proteins & vitamins that are effortlessly passed onto the hair cuticles to assist in the protection & strength of your hair, while the ceramic coating helps keep your hair looking healthy & shiny by maintaining even heat during the styling process. Static is reduced by quickly sealing the hair cuticle layer, ensuring minimal frizz making your hair easier to manage.

HOW TO USE THE SHINE ENVY ROTATING HOT-AIR STYLER

IMPORTANT:
Hair that has been heavily bleached or chemically treated should only use the low heat setting on this product. Please consult your hairdresser on using heated appliances if you have any concerns about the condition of your hair.

CAUTION:
Take care not to direct the airflow directly onto the skin (e.g. scalp, neck ears, face, etc.) as hot air from the styler can, particularly if held too close, cause discomfort or even burn.

BEFORE USING

• Remove all packaging & point of sale labels before use.
• Remove plastic cover from plug before use (used to protect it from damage during transportation).

FITTING & REMOVING THE BRUSH HEADS
To attach a brush head to the body of the hot air styler, line up the guides of the two parts & press until you hear a click. To remove the brush head, press on the unlocking buttons located on the sides of the hot air styler & gently pull the brush head off.

PROTECTIVE BRUSH COVERS
Brush covers for the 50mm brush head & 38mm brush head are included for protection & easy storage.

OPERATING INSTRUCTIONS

Wash, condition & towel dry your hair. Ensure your hair is slightly damp, combed through, & tangle-free.

1. Make sure the switch is set to the off (‘0’) setting before plugging into a 230-240V~ suitable power outlet.

2. Divide your hair into sections, between 2.5cm – 5cm wide & no more than 1cm thick (if you have thick hair make the section around 5mm thick).

3. Attach the 38mm bristle brush (for styling shorter hair) or the (50mm bristle brush) for styling medium to longer hair & switch to the high heat/speed (II) setting for initial drying.

4.  Place the styler under the section of hair, close to the roots & brush through the section to remove tangles (without brush rotating).

5. Switch to the low heat/speed (I) setting for further drying & styling then move the brush through the hair section (hair is draped over top of brush), towards the ends.

6. When you reach the end of the hair section, start to rotate the brush away from your head by pressing & holding the appropriate rotation direction (‘ ’) setting.
   NB: As you do this, it is important to resist the rotation of the brush by pulling the brush downwards. The brush should be rotating through the section of your hair without the hair becoming wound round the brush head (if you are holding the styler with the correct tension against the hair).

7. To release the section of hair, press & hold the opposite rotation but-ton.

8. Repeat this through all sections.

9. To finish, switch to the cool (‘ ’) setting to set the style for longer lasting results after drying.
   NB: The brush does not rotate on this setting. Allow the styler to cool, before placing protective brush covers over the brush heads to protect while stored away.

BRUSH ROTATION & TEMPERATURE/SPEED SETTINGS

• Your styler has a two-way rotation that can be used when styling (not on the cool setting) .
• To make the brush head rotate press the switch marked on the upper handle. These will make the brush head rotate in a clockwise or anticlockwise direction.
• The styler has 2 heat/speed settings & a cool setting. When the styler is set on the high heat setting the brush head will rotate faster. When the styler is set on the low heat setting the brush head will rotate slower.

USAGE TIPS

• It may take several attempts to perfect the technique of using a rotating hot air styler. If the brush spins too quickly & hair wraps around the brush head, simply release the rotation button & remove from the hair. Use the low heat setting (low brush speed) & practice rotating the brush on the lower ends of your hair until you feel comfortable with the styling action. If hair continues to wrap around the barrel, you need to increase the downward tension.
• It’s ESSENTIAL to section your hair before styling & to style section-by-section to get the best results.

HOW TO STYLE WITH THE SHINE ENVY

• ROTATING HOT-AIR STYLER STRAIGHT
  Create a smooth straight look by dividing your hair into sections & slowly glide down the hair section & curl under to smooth the hair cuticle.

• VOLUME
  Create tousled natural-looking waves for that finished touch, by loosely wrapping the sections around the brush. For more bounce in your waves tightly wrap the hair sections for longer. Once air-styled, finger comb to arrange your hair as required.

• EXPERT TIP
  Set your style with the ‘cool air’ setting & finish with a spritz of light hold hair spray, for extra hold if needed.

• SEE AMAZING, BE AMAZING
  For all our style tutorials check us out online vssassoon.com.au

CLEANING & MAINTENANCE

Blocked or clogged air intake vents will cause the styler to overheat. The rear filter should be checked & cleaned on a regular basis – to help maintain optimum performance & prevent overheating.
Unplug the styler & allow to cool completely before cleaning or storing.

• Holding the handle of your styler firmly, click down to open the rear filter at the base of the styler.
• Using a soft brush, clean any hair & other debris that may build up in the filter.
• Replace the rear filter by pushing back into position

If overheating occurs, an automatic safety device will shut the styler or the heat off to prevent damage or personal injury. If the styler or heat turns off, unplug the cord & allow the styler to cool for 15 minutes before restarting. Make sure the air vents are 100% clean .

LIMITED 2 YEAR WARRANTY

• Retain this section of the warranty card with your receipt/proof of purchase. You must present it to obtain replacement or service under the warranty.
• The warranty may only be claimed where proof of original purchase is presented, i.e. original purchase receipt or invoice.
• Attach a copy of your purchase receipt and store in a safe place.
• To make a warranty claim, call Customer Service on the phone number or email below. Or you can return the defective product back to the place it was purchased where it will be replaced (see point 12 of paragraph C. Conditions).

Please provide the following details:

1. Date of purchase
2. Retailer name & location
3. Product name/model number
4. Confirm you have your purchase receipt
5. Detail the problem with your product

Conair Australia Pty Ltd PO Box 146

• Terrey Hills
• NSW 2084
• Customer Service Australia 1800 650 263
• email: aus_info@conair.com

Conair New Zealand Ltd PO Box 251159 Pakuranga, Auckland New Zealand 2140

• Customer Service
• Ne Zw ealand
• 0800 266 247
• email: aus_info@conair.com

WARRANTY AGAINST DEFECTS

A. AUSTRALIAN CONSUMER LAW
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 2. The guarantees under the Australian Consumer Law (“ACL”) are provided in sections 51 to 59 inclusive of the ACL (“Statutory Guarantees”) and the remedies are provided in sections 259 to 266 inclusive of the ACL (“Statutory Remedies”).

B. VS SASSOON EXTENDED WARRANTY

1. In addition and subject to the Statutory Guarantees and Statutory Remedies, the following express warranty (“Warranty”) commences from the date of purchase and continues for a period of 24 months (“Warranty Period”) after which it expires. Subject to the conditions in Section C below, Conair warrants to the original purchaser (“Purchaser”) of the VS Sassoon product that is the subject of this warranty (“Product”) that if during the Warranty Period, the Product suffers from any defect caused by faults in materials or workmanship, Conair will a) replace the Product, or b) exchange defective parts in the Product or c) repair the Product, as Conair may choose in its discretion (“Warranty”). In this Warranty “Conair” means Conair Australia Pty Limited (ABN 64 068 492 044) of The Equinox Centre, Suite 101, 18 Rodborough Rd, Frenchs Forest, NSW, 2086. in relation to Products purchased in Australia and Conair New Zealand Ltd in relation to Products purchased in New Zealand.
2. To honour the Warranty, Conair must replace, or exchange parts in, or repair, the Product, as Conair determines, in accordance with paragraph B1 above, subject always to the conditions in Section C below.
3. If any of the conditions in Section C below are inconsistent with any provisions of the ACL or regulations made thereunder, those provisions of the ACL or regulations shall prevail to the extent of the inconsistency.

C. CONDITIONS

1. T he Product must be used in accordance with manufacturer’s instructions. This Warranty does not apply should the defect in or failure of the Product be attributable to misuse, abuse, accident, act of God such as lightning, or nonobservance of manufacturer’s instructions on the part of the user. This Warranty does not cover ordinary wear and tear in the Product or its parts.
2. Conair does not accept liability for a) any loss or damage however suffered, caused by or arising out of any failure to use the Product in accordance with the manufacturer’s instructions, and b) any indirect, consequential or economic loss or damage however caused.
3. This Warranty is immediately void if – a) any serial number or appliance plate is removed or defaced, b) the Product has been serviced or otherwise repaired by a person not authorized to do so by Conair or where non approved replacement parts are used.
4. The Product is designed for domestic use only. The Product must be connected to the electrical voltage supply as specified in the ratings label located on the Product. This Warranty does not cover defects arising from non-domestic use or incorrect voltage supply.
5. This Warranty may only be claimed against where proof of original purchase is presented, for example, original receipt or invoice.
6. Any parts of the Product that need to be replaced, or if the whole Product needs to be replaced, the replaced Product, becomes the property of Conair. The Warranty on any replacement Product or parts will expire on the same date that the Warranty Period on the original Product expires.
7. The benefits provided by this Warranty are in addition to all other rights and remedies in respect of the Product which the Purchaser has under the ACL, and applicable laws in New Zealand, which rights and remedies by law may not be excluded. All other warranties and representations express and implied are hereby excluded.
8. T he defect must have occurred during the Warranty Period and Purchaser bears the onus of proving that fact, and that the defect was not caused by any of the causes excluded from this Warranty.
9. This Warranty does not cover Products purchased from any person who is not a retailer serviced by Conair’s authorised distributors or purchased second hand.
10. The Purchaser is responsible for all postage and freight charges and any other expenses incidental to claiming against this Warranty.
11. The Warranty excludes consumable items (such as blades or brushes) and normal wear and tear.
12. If you’re certain your product is defective, and the product is covered by the terms of this warranty, you need to take the product back to the place you purchased it from, where the retailer will replace the product for you on our behalf. In this event, per the terms of this warranty you will need to present this portion of the warranty card and the purchase receipt as proof of purchase so please make sure you keep both this card and your receipt on hand for the duration of the warranty period.

SPARE PARTS
Replacement parts may be available for your product. Contact us on the phone or email address provided for more details. Please provide your product name/model number details, date of purchase and part you require.

Certain trademarks used under license from The Procter & Gamble Company or its affiliates. ©2022 Conair Australia Pty Ltd Suite 101, 18 Rodborough Rd Frenchs Forest NSW, 2086 Australia

Conair New Zealand Limited

• PO BOX 251159
• Pakuranga, Auckland 1706
• New Zealand

CONTACT US:
For advice, tips on your new VS product
E-mail us on : aus_info@conair.com

CUSTOMER SERVICE:

• Australia: 1800 650 263
• New Zealand: 0800 266 247
• vssassoon.com.au
• VSHA2735TA

Documents / Resources

| VIDAL SASSOON VSHA2735TA Shine Envy Rotating Hot Air Styler [pdf] Instructions
VSHA2735TA Shine Envy Rotating Hot Air Styler, VSHA2735TA, Shine Envy Rotating Hot Air Styler, Rotating Hot Air Styler, Hot Air Styler, Air Styler
---|---

References

• Womens Hair Styling Range | VS Sassoon Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>