CENTEK CT-1005 Electric Kettle Instruction Manual
- June 12, 2024
- CENTEK
Table of Contents
CT-1005 Electric Kettle
Instruction Manual
CT-1005 Electric Kettle
DEAR
CUSTOMER,
Thank You for purchasing a CENTEK brand product. We guarantee flawless
function of this item, provided the guidelines of its operation are observed.
This appliance is designed for use in domestic and similar applications, in
particular:
- in personnel kitchen zones at stores, offices and industrial facilities;
- at agricultural farms;
- by clients at hotels, motels and other residential facilities;
- in private boarding houses.
PURPOSE OF THE APPLIANCE: The kettle is designed for heating and boiling drinking water.
SAFETY PRECAUTIONS
The following requirements should be strictly observed in order to avoid situations hazardous for human life and health, as well as premature failures of the appliance:
-
Carefully read the present manual prior to operating the appliance. Retain the present manual, cash voucher and appliance packaging.
-
Use the appliance only for its intended purpose.
-
This appliance is not designed for commercial applications. Do not use the appliance outdoors.
-
Do not place the appliance near heat sources, do not expose it to direct sunlight and moisture (do not submerse it in water or other liquids).
-
Do not touch the appliance with wet hands. In case of ingress of moisture or leakage from the appliance immediately disconnect it from power supply.
-
Always disconnect the appliance from power supply after use and before cleaning (pull the plug, do not pull it out by the cable).
-
Do not let children play with the appliance. Do not leave the appliance unattended. Ensure that the power cable is routed in a location inaccessible for children.
-
Regularly check the appliance and its power cable for damage. Operating a damaged appliance is not allowed.
-
Do not attempt to repair the appliance yourselves, apply to certified technicians.
In case of damage to the power cable have it replaced by the Manufacturer, an authorized service centre or other skilled personnel. -
Only the use of original spare parts is allowed.
-
Special instructions for transportation (shipment) and sale: none.
Should You decide to transfer the appliance to another person, please pass the
present manual over along with it.
SPECIAL SAFETY REQUIREMENTS
- Fill the kettle with cold water only.
- Ensure that the kettle is turned off before removing it from the base!
- Ensure that the lid is firmly closed before turning the kettle on.
- Do not attempt to boil water in the kettle with the lid open, this will prevent the automatic shutdown from functioning and may cause a fire.
- Use the kettle only together with the base supplied with it.
- Avoid contact of water with the surface of the kettle and the power base.
- The water level should be between the MAX and MIN marks! If the kettle is felled over the maximum level mark, boiling water may spill out!
- Use the appliance only with the proper connector.
- The appliance is not designed to be powered from an external timer or other separate remote control system.
- CAREFUL: accessible surfaces of the appliance can reach high temperature during operation. Do not touch the hot surfaces.
- The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to children play with the appliance.
APPLIANCE DESCRIPTION
A. Lid
B. Spout
C. Handle
D. Housing
E. Power base
SCOPE OF SUPPLY
- Electric kettle – 1 pc.
- Lid – 1 pc.
- Kettle base – 1 pc.
- Operating Manual – 1 pc.
OPERATING PROCEDURE
- Retain all packaging materials until you make sure that the kettle operates properly.
- Ensure that the power supply grid voltage corresponds to the one indicated on the kettle’s base before operating it.
- Do not operate the unit with damaged power cable or plug.
- Before the first use boil and discard water two times. It is recommended to add some citric acid to the water for the first boiling. The kettle is designed for boiling pure water only.
- Place the kettle on a smooth level surface. Do not place the kettle at the edge of a table.
- Connect the kettle to an electric socket. Excessive power cord can be wrapped around the guides inside the base and draw its end through the cutout in its side.
- Do not let the power cord hang from a table where a child can pull on it.
- Do not place the kettle near heating appliances and hot surfaces.
CONTROL PANEL
- «Barista Mode» / «Mute» button
- Temperature regulator
- «Keep Warm» mode / ⁰F/⁰C selection button
- «Start/Cancel/OFF» button
- LCD display
- «Keep Warm» mode indicator
- Water heating indicator
- «Barista Mode» indicator
- «Mute» mode indicator
«BARISTA MODE»
This mode is suitable for making coffee. To activate the mode press button
(1), the indicator and temperature value will light up on the display. Use the
temperature regulator to select the required value (three temperature levels
are available for this mode: 91 °С / 93 °С / 96 °С).
«MUTE» MODE
Press and hold button (1) for 3 seconds to enter the «Mute» mode, a symbol
will appear on the display. Hold down the button again to cancel the mute
mode.
TEMPERATURE REGULATOR
The temperature regulator allows:
- selecting the desired temperature to which the kettle will heat the water (within a range of 40 to 100 °С at an increment of 5 ⁰С, or 100 to 212 °F);
- selecting the temperature in the «Barista» mode;
- setting the time and temperature for maintaining the temperature in the «Keep Warm» mode.
«KEEP WARM» MODE
This mode allows maintaining the selected temperature within a time period
from 10 minutes to 2 hours. If the temperature drops below the selected value
the heating element will turn on automatically.
The «Keep Warm» mode is activated by pressing button (3).
-
Temperature Maintenance Time Selection. Press the «Keep Warm» button once.
The time indicator (00:10) will appear on the display together with the HOLD indicator. Using the temperature regulator set the desired warming time (at a 10-minute increment). The maximum allowable time of temperature maintenance is 120 minutes. -
Temperature selection. After setting the time press the «Keep Warm button once again. The temperature value indicator will appear on the display together with the HOLD indicator. Using the temperature regulator set the desired temperature that you wish to maintain during the selected time. If you select 100 ⁰С the water will be brought to a boil again when the temperature drops by 5 ⁰С. If you select a temperature lower than 100⁰С the «Keep Warm» function will be activated if water temperature drops by 2 ⁰С.
A indicator will light on the display as long as the «Keep Warm» function is
active. When the selected time elapses the appliance will automatically switch
to standby mode.
°F/°С SELECTOR BUTTON
Press and hold button (3) for 3 seconds to change the temperature display unit
(this function is active in both standby and operating modes).
«START/CANCEL/OFF» BUTTON
After selecting the function in standby mode pressing the button once will
activate the appliance.
Press the button twice to start heating the water in the kettle. Press the
button twice once again to stop the heating process and switch to the standby
mode.
Press and hold the button for 3 seconds to turn the appliance off.
LCD DISPLAY
The display indicates:
- Water temperature in the kettle;
- Water temperature setting (together with the SET indicator);
- Warming time (together with the HOLD indicator);
- Water heating scale.
«KEEP WARM» MODE INDICATOR
The indicator lights up when the «Keep Warm» mode is activated and turn off
when the function is cancelled (deactivated).
WATER HEATING INDICATOR
The indicator lights up when water heating starts and goes out when the
heating is completed.
«BARISTA MODE» INDICATOR
The indicator lights up when the «Barista» mode is activated.
«MUTE» MODE INDICATOR
The indicator lights up when the «Mute» mode is activated.
NOTE:
The standby mode lasts for 5 minutes after which the kettle will automatically
power off, the display and all indicator will go out. After that, pressing any
button or turning the temperature regulator dial will return the kettle to
standby mode.
MEMORY FUNCTION
If you lift the kettle off the power base and put it on again within 10
minutes it will automatically resume operation in the selected mode. The
button (4) indicator backlight will light on; however the LCD display setting
indicator and the other buttons will not light up.
OPERATING THE KETTLE
- Before connecting the kettle to power supply, ensure that the power switch is in the OFF position.
- Grab the kettle by the handle and lift it vertically off the power base. Open the lid. Please do not fill hot tap water into the kettle. Open the tap and let the water run for a few seconds to ensure that it is clean.
- Fill water into the kettle. Check the water level by the level gage on the kettle housing.
- Do not fill the kettle above the MAX mark. Warning: hot water may be ejected from the spout when the kettle is overfilled.
- Close the lid.
- Connect the kettle to an electric socket.
- Before pouring hot water from the kettle, wait for it to stop bubbling. Water heating can be aborted at any time by pressing the START/CANCEL/OFF button.
- Take the kettle off the power base vertically, grabbing it by the handle. Condensate may occur on the upper surface of the power base when the kettle is lifted off. This is normal and not a sign of malfunction.
ATTENTION! Do not turn the kettle on the base to avoid spilling out of
hot water! Ensure that the kettle is turned off before removing it from the
base! Do not open the lid during boiling!
DRY OPERATION SAFETY
The kettle is equipped with a system the automatically turns it off when it is
accidentally turned on without water or with an insufficient amount of water
inside.
If the system is tripped disconnect the kettle from power supply and let it
cool down for 15 minutes. After that you may resume operation of the
appliance. An unpleasant odor may occur if the safety is tripped.
MAINTENANCE
SCALE REMOVAL
Regularly remove scale using special descaling chemicals. Follow the
instructions on the packaging. You may also use a weak citric acid or vinegar
solution to remove scale. Do not try to use a more concentrated solution as it
may lead to corrosion and leaks from the appliance.
ATTENTION! The guarantee undertakings do not cover the damage caused by
improper scale removal.
CLEANING
- Always disconnect the appliance from power supply before cleaning!
- Clean the outer surfaces of the kettle, if necessary, with a slightly dampened cloth without detergents.
- Do not submerge the kettle or base in water.
- Do not use abrasive cleaning agents and solvents to clean the kettle.
SPECIFICAIONS
- Nominal voltage: 220–240 V ~50/60 Hz
- Capacity: 1,0 l
- Nominal рower rating: 900-1100 W
DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.
CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end
user, provided the item will be used in strict accordance with the present
manual and the applicable technical standards. Upon expiry of the service life
please contact the nearest authorized service centre for suggestions as to
further operation of the appliance. The manufacturing date of the appliance is
integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 –
month of manufacture). If any questions related to appliance maintenance
should arise, or if the appliance has malfunctions, apply to the CENTEK TM
Authorized Service Center. The address of the service center can be found on
the website https://centek.ru/servis. Service support contacts: Phone: +7
(988) 24-00-178, VK: vk.com/centered. General Service Center: OOO «Larina-
Servis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity:
№ ЕАЭС RU C-CN.ВЕ02.В.02135/20 of 26.03.2020.
MANUFACTURER AND IMPORTER INFORMATION
Manufacturer: Ningbo Goodfriends Electric Appliance Co., Ltd. Address: No.1338
West Tan Jialing Road, Xiaodong Industrial Zone, Yuyao, PRC, China. Imported
to EAEU by: Individuality Predprinimatel Saruman Karo Shurikovich. Address:
Russia, 350912,
Krasnodar, ul. Ataman Lysenko, 23, pgt. Pashkovskiy. Phone: +7 (861)
2-600-900.
DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of
sale to the end consumer. With this Warranty Card the Manufacturer confirms
the proper condition of the appliance and undertakes to repair, free of
charge, all defects caused by the Manufacturer’s default.
GUARANTEE MAINTENANCE TERMS
-
The guarantee shall be valid if the following documentation conditions are observed:
-
The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous. -
The guarantee shall be valid if the following operation conditions are observed:
-
the appliance is used in strict accordance with the present manual;
-
the safety rules and requirements are observed.
-
The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.
-
The guarantee does not apply in the following cases:
-
mechanical damage;
-
normal wear of the appliance;
-
non-observance of operation requirements or erroneous actions on the part of the user;
-
improper installation or transportation;
-
natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
-
ingress of foreign objects, liquids or insects into the inside of the appliance;
-
repairs or modifications to the appliance by unauthorized persons;
-
use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
-
failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers); -
for battery-powered appliances – operation with inappropriate or depleted batteries;
-
for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.
-
The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.
-
The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.
-
Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).
The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.
WARRANTY CARD
ATTENTION! Please require the seller to fill out the warranty card and
tear-off coupons in full
PRODUCT……………………………..
MODEL …………………………………
SERIAL NUMBER ………………….
DATE OF SALE……………………..
This tear-off coupon is filled in by a representative of the seller
PRODUCT……………………………..
MODEL …………………………………
SERIAL NUMBER ………………….
DATE OF SALE……………………..
COMPANI-SELLER ………………..
The legal address of the seller’s company
BUYER’S FULL NAME AND PHONE NUMBER
These tear-off coupons are filled in by a representative of the service center
TYPE OF REPAIR…………………
DATE OF RECEIPT……………..
DATE OF ISSUE…………………..
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>