VEVOR PKHJ3011C Heavy-Duty Pickup Truck Rack User Manual
- October 30, 2023
- VEVOR
Table of Contents
HEAVY-DUTY PICK UP
TRUCK RACK
USER MANUAL
Model: PKHJ3011C
User Manual
PKHJ3011C Heavy-Duty Pickup Truck Rack
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
[email protected]
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our user
manual. The appearance of the product shall be subject to the product you
received. Please forgive us that we won’t inform you again if there are any
technology or software updates on our product.
Safety & Warning
- Read and understand this entire manual before assembling, installing, operating, or servicing this product.Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property.
- Adhere to all Department of Transportation (D.O.T.) requirements when using this product. Use ropes and tie downs（not included） to securely hold all cargo in place.
- Do not overload the Ladder Rack. Never exceed the maximum weight capacity of 800 Lbs. (this is front and back rack combined capacity.)
- Make sure the vehicle is in a safe place for loading ladders and other cargo. Make sure the vehicle’s engine is OFF, with parking brake set, before loading or unloading the Ladder Rack.
- Do not use to hold or restrain human or animal weight in any manner.
- When assembly is complete, check and test all vehicle systems including lights and brakes; make sure no damage occured during product installation.
- This Ladder Rack is designed to carry ladders, lumber, piping, rebar, sports equipment and other long materials. Do not modify the Ladder Rack and do not use this product for purposes that it was not designed for.
- Before and after each use, check to make sure that all hardware is tightly secured. Regularly inspect for damage. If fraying or distortion is found, immediately discontinue use.
- Use common sense when working. Stay alert and concentrate when setting up and using the Ladder Rack. Never work while under the influence of alcohol, drugs or medications.
- While assembling and using the Ladder Rack keep work area clean and well lighted. Keep spectators and children out of the work area.
- Dress appropriately. Never wear loose fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing and gloves away from moving parts
Specifications
| Model Series | PKHJ3011C |
|---|---|
| Maximum weight capacity(Lbs) | 800 |
| Adjustable width | 46-71inch (1170-1803mm) |
| Gross Weight(kg) | 24.2 |
| MEAS(mm) | 790×375×200 |
Package Contents
| Part | Description | Qty |
|---|---|---|
| 1 | Left Cross Bar | 2 |
| 2 | Right Cross Bar | 2 |
| 3 | Left Support Tube | 2 |
| 4 | Right Support Tube | 2 |
| 5 | Intermediate Pipe | 2 |
| 6 | M10×20 Bolt | 8 |
| 7 | J Type Bolt | 4 |
| 8 | M10 Washer | 4 |
| 9 | M10 Lock Nut | 4 |
| 10 | Bottom Support Square Pipe | 4 |
Installation Guide:
Step 1
Put the left support tube(3) onto the rail of the truck bed by 1pcs J type
bolt (7)and bottom support square pipe（10）, M10 washer(8), M10 lock nut(9),
repeat the above step for another one and the two right cross bar(2). And the
left support tube and the right support tube must on the same line,finally
tighten the nut.Show as figure 2 Step 2
Put the Intermediate pipe(5) into left cross bar (1) and right cross bar (2)
at proper position.Twist the bolt (6)into the nut on the left and right cross
bar.Show as figure 3. Step 3
Put the left and right cross bar(The step2 to assemble the components) onto
the left and right support tube(The step1 to assemble the components), and
screw the two bolts (6). Step 4.
Repeat the above steps to assemble the other pick up ladder rack to the truck
bed rail, please note the distance of the two racks is suitable for your need.
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH
EUREP GmbH
Unterlettenweg 1a, 85051 Ingolstadt, Germany
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
Manufacturer: Ningbo beilun Reynol mechanical CO.,Ltd
Address: NO 105，Putuoshan RD, Beilun, Ningbo
Made in China
Support and E-Warranty Certificate
https://www.vevor.com/support