Warmup WUDG WSC-7026 PROGRAMMABLE THERMOSTAT Product Specifications
- October 30, 2023
- Warmup
Table of Contents
Warmup WUDG WSC-7026 PROGRAMMABLE THERMOSTAT
View all Warmup thermostat manual
PRODUCT CODE
WUDG
The world’s best-selling electric floor heating brand™
PRODUCT DESCRIPTION
An “all-in-one” programmable thermostat for electric underfloor heating control where optimal comfort temperature and minimum energy consumption is required.
THERMOSTAT CONTROL
The thermostat is an electronic on/off thermostat for controlling temperature by means of a sensor placed either externally or built into the thermostat. The heat output is switched on and off with a difference of only 0.7°F (0.4°C). The thermostat can be configured for control of floor temperature, room temperature or room temperature with a limit switch, and regulator without a sensor. It is compatible with existing floor sensors by means of a temperature setting, making it the best thermostat for renovation purposes.
CLASS A GFCI
The thermostat features a built-in Class A GFCI (Ground Fault Circuit
Interrupter). Should a ground fault occur, the GFCI disconnects both lines to
the heating element. The thermostat and GFCI are multi-voltage models suitable
for 120-240 V (incl 208 V), and 50/60 Hz power supplies.
BUILT-IN CLOCK FUNCTION
The thermostats are supplied with a factory-set 4-event program for automatic
comfort and setback temperatures.
INDIVIDUAL PROGRAMMING OF EVENTS
The factory-set periods and/or temperatures can be changed according to
requirements. Furthermore, the following programs can be selected:
- 4 events for 5 days and 2 events for days 6+7
- 4 events for 6 days and 2 events for day 7
- 4 events per day
The programmable thermostat features an adaptive function, allowing it to calculate when the heating must be switched on to ensure that the comfort temperature is reached at the required time.
COMFORT MODE
The room temperature can be temporarily changed for a single event. The
comfort mode temperature is reset after a selected number of hours. The
thermostat will then return to the scheduled event program.
MANUAL MODE
The scheduled event program can be canceled, e.g. during holidays, and the
temperature set for frost protection purposes instead, e.g. to 41°F (5°C). The
new set-point will remain active until the manual mode is canceled.
MONITORING OF ENERGY CONSUMPTION
Total switch-on time in percent can be displayed for the last 2 days, 30 days,
or 365 days. Overall energy consumption can thus be monitored.
TEMPERATURE LIMITATION
DUALUDG-4999 is supplied with a floor sensor that can be used for:
- Max. temperature limitation: For the protection of wood floors, etc.
- Min. temperature limitation: For better heating comfort.
BACKUP FUNCTION
In the event of a power failure, an internal circuit will maintain the
programming and time. However, the time must be reset if the power failure
exceeds two hours.
DIMENSIONS
SPECIFICATION
| Supply | 120-240 Vac 50/60 Hz |
|---|---|
| Load | 15A maximum (resistive load) |
| Power | 1.800 W at 120 Vac |
| 3.120 W at 208 Vac | |
| 3.600 W at 240 Vac | |
| GFCI | Class A (5 mA trip level) |
| Temperature range | +41 to +104°F (+5 to +40°C) |
| Floor limit range | +41 to +104°F (+5 to +40°C) |
| Amb. Temp. range | +32 to +104°F (0 to +40°C) |
| Clock function | 4-event program |
| On/Off differential | 0.7°F (0.4°C) |
| Regulation principle | PWM / PI |
| Housing | Nema 2 (IP21) |
| Floor sensor type | NTC (12 KΩ) 10 ft (3 m) |
| Dimensions (H/W/D) | 4.72/2.95/0.8 inch (120/75/20mm) |
ADVANTAGES
- Efficient, Intuitive, and Stylish
- Simple user interface and thoughtful installation design
- Pre-programmed for quick set-up
- Monitored energy consumption
- Simple operation – no need for manual
- Multi-voltage: 120-240 V (incl. 208 V)
- Output relay: 15 A
- Large back-lit display for easy reading
- Single thermostat for all applications (room, floor, room with floor limitations and as regulator)
- Class A GFCI for wet room installation
WARRANTY & MAINTENANCE
When installed according to the installation manual, the WUDG is covered with Warmup’s 3-year manufacturer warranty.
TECHNICAL SUPPORT
The warmup is available 24/7/365 at (888) 927-6333. For quotes, layouts, and specific technical information, contact us at +1 (888) 927-6333
RELATED PRODUCTS
- NADCM-PRO – see WSC-0816
- NADWM – see WSC-0720
- NADWS – see WSC-0721
- FOIL – see WSC-0723
- WODH – see WSC-0724
WARMUP INC.
USA: us@warmup.com
Tel.: 1-888-927-6333
www.warmup.com
CANADA: ca@warmup.com Tel.: 1-888-592-7687
www.warmup.ca
Warmup WUDG WSC-7026 PROGRAMMABLE THERMOSTAT Product Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>