VISUAL COMFORT CD 3610 Sutro Medium Right Table Lamp Instruction Manual
- October 30, 2023
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CD 3610 Sutro Medium Right Table Lamp
Product Information
The Sutro Medium Right Table Item # CD 3610 is a light fixture that comes with a harp, socket ring, finial, and a protective cover for the plug. The bulb is not included with the product. The light fixture should be installed by a person familiar with the construction and operation of it, as well as the hazards involved. It should be installed in accordance with all applicable, local installation codes. The product should be inspected carefully before installation, and if any damage or defect is found, do not install.
Product Usage Instructions
- Use scissors to carefully remove all parts from the box. Place on a clean, soft surface.
- Remove socket ring (D) from socket (E).
- Install harp (C) to socket (E) and secure with socket ring (D).
- Remove finial (A) from harp (C).
- Remove shade (B) from packaging and install to harp (C) using finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.
- Install light bulb into the socket.
- Remove protective cover (F) from plug.
- Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Tools Required (Not Included): Scissors
Note: This product is listed and LED certified for use in the United
States.
ASSEMBLY INSTRUCTIONS
Sutro Medium Right Table
Item # CD 3610
NOTICE
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED)
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Remove socket ring (D) from socket (E).
-
Install harp (C) to socket (E) and secure with socket ring (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (F) from plug.
-
Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.