IKEA VATTENSTEN LED Light Strip Instruction Manual
- October 30, 2023
- Ikea
Table of Contents
IKEA VATTENSTEN LED Light Strip
Product Information
The VATTENSTEN product is an LED light strip designed for indoor use only. It comes with a permanent assembly tape that should not be removed to avoid damaging the surface beneath the lamp. The light source is non-changeable LED diodes. The product should not be disassembled as it can cause damage to the eyes. The product should not be immersed in water. It is important to regularly check the cord, transformer, and all other parts for damage. This product is only for use with an LED driver with Class 2 output or Class 2 Power supply or Limited Power Source (LPS) rated 24V, max. 3A, max. 15W.
Usage Instructions
- Step 1: Wipe the surface dry where the tape will be used with a clean and dry cloth.
- Step 2: Use the permanent assembly tape to attach the light strip to the surface. Do not remove the tape as it can damage the surface beneath the lamp.
- Step 3: The light strip can be cut at the marks on the product. Ensure that the product is unplugged when you cut it.
- Step 4: Use a damp cloth to clean the product. Do not use a strong cleaning agent.
- Step 5: Regularly check the cord, transformer, and all other parts for damage. If any part is damaged, do not use the product.
- Step 6: Keep the unused fittings for future use.
Note: Deviation from the assembly instructions may result in a risk of fire or electric shock. Keep these instructions for future use.
IMPORTANT SAFETY INSTRUCTIONS
For indoor use only
- Regularly check the cord, the transformer, and all other parts for damage.
- If any part is damaged the product should not be used.
- Important information! Keep these instructions for future use.
CAUTION!
- The light source of this product is non-changeable light diodes (LED).
- Do not disassemble the product, as the light diodes can cause damage to the eyes.
- Do not immerse in water.
Cleaning
- Use a damp cloth, never a strong cleaning agent.
- Wipe the surface dry where the tape will be used with a clean and dry cloth.
- The assembly tape is permanent and is not intended to be removed. You might damage the surface under the lamp if you try to remove the tape.
- Please keep the unused fittings for future use.
WARNING
- Deviation from the assembly instructions may result in a risk of fire or electric shock.
- Only for use with LED driver with Class 2 output or Class 2 Power supply or Limited Power Source (LPS): rated 24V, max. 3A, max. 15W.
INFO
PACKAGE CONTENTS
WARNING
- The light strip can be cut at the marks. Make sure that the device is unpluged when you cut.
INSTALLATION INSTRUCTIONS
© Inter IKEA Systems B.V. 2021 2022-04-13 AA-2324651-3.