Neomounts NM-TC100 CPU Holder Instructions Manual
- June 9, 2024
- Neomounts
Table of Contents
Neomounts NM-TC100 CPU Holder
Dimension Overview
Measurement and Tools
PARTS
Assembling
STEP 1 Disassemble the Thin Client holder
STEP 2 A
Pole installation: Install the Thin Client holder on the pole and place the
protective strips
STEP 2 B Pole installation: Assemble the Thin Client holder, adjust depth if
STEP 2 C Pole installation: Place and tighten the safety belt
STEP 2 A Desk installation: Place the protective strips
STEP 2 B Desk installation: Place the safety belt and install the Thin Client holder under the desk
STEP 2 C Desk installation: Assemble the Thin Client holder and adjust depth if necessary
STEP 2 D Desk installation: Place the Thin Client and tighten the safety belt
STEP 2 A VESA plate installation: Install the Thin Client holder on the bracket and place the protective strips
STEP 2 B VESA plate installation: Assemble the Thin Client holder, adjust depth if necessary, and place the Thin Client
STEP 2 C VESA plate installation: Place and tighten the safety belt
Caution
- To ensure safety, please read this manual carefully before installation and follow the instructions. store this manual in a secure place for future reference.
- The manutacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity, or contact with water,
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure a safe installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
- The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times the display and mount combined. The mounting location must be able to withstand earthquakes or other strong shocks.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
FAQ’s
What is Neomounts NM-TC100 CPU Holder?
The Neomounts NM-TC100 is a CPU holder designed to securely mount your computer’s CPU under your desk, keeping it off the floor and out of the way.
What are the dimensions of the NM-TC100?
The NM-TC100 is designed to accommodate CPUs with a width of 90-220mm and a height of 290-500mm.
How much weight can the NM-TC100 support?
The NM-TC100 is designed to support CPUs weighing up to 20 kg.
Can the NM-TC100 be mounted on any desk?
The NM-TC100 is compatible with most desks that have a thickness of 15-50mm.
How is the NM-TC100 installed?
The NM-TC100 is easy to install and comes with all the necessary hardware. It can be mounted on the underside of your desk using the included brackets and screws.
Can the NM-TC100 be adjusted?
Yes, the NM-TC100 can be adjusted horizontally and vertically to accommodate different CPU sizes.
Will the NM-TC100 fit my CPU?
The NM-TC100 is designed to fit most CPUs with a width of 90-220mm and a height of 290-500mm. However, it’s always best to check the dimensions of your CPU before purchasing.
Is the NM-TC100 compatible with standing desks?
Yes, the NM-TC100 is compatible with standing desks.
Can the NM-TC100 be used for other devices besides CPUs?
The NM-TC100 is specifically designed to hold CPUs and may not be suitable for other devices.
Is the NM-TC100 covered by a warranty?
Yes, the NM-TC100 comes with a 5-year warranty.
Download this PDF Link:Neomounts NM-TC100 CPU Holder Instructions Manual