iQ360XT Dust Capturing 14 Inch Masonry Saw User Manual

iQ360XT 120V
Parts Manual

FRONT ANGLED VIEW

BACK ANGLED VIEW

MOTOR GEAR HOUSING

ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO| DESCRIPTION
---|---|---|---|---
A8| A8| 1| 0360-62002-02| iQ360XR 120v Saw Motor

K5

| K5| 1| 036-90006-01| Hardware Kit
1| 4| Tap Screw
4| 1| Tap Screw
8| 1| Tap Screw
9| 1| Washer
10| 3| Tap Screw
| 2| 1| 0360-62074-01| Main Power Switch 120v

K16

| K16| 1| 0360-90026-01| Control Box Kit (Top & Bottom)
3| 1| Control Box Top
11| 1| Control Box Bottom

K6

| K6| 1| 0360-90007-01| Jumper Wire Kit
5| 1| Jumper Wire
6| 1| Jumper Wire
| 7| 1| 0360-62079-02| PCB Module 120v
SET| 12| 1| 0244-90087-01| Cord Ring (Set of 2)
SET| 13| 1| 0360-90024-01| Screw (Set of 4)
| 14| 1| 0360-62086-01| Carry Handle

K2

| K2| 1| 0360-90003-01| Outer Flange Hardware Kit
15| 1| Hex Screw with Washer
16| 1| Outer Flange Washer
| 17| 1| 0360-62089-01| Flange, Out (Black oxide)
| 19| 1| 0360-62091-01| Flange, In (Black oxide)

K7

| K7| 1| 0360-90008-01| Hardware Kit
20| 4| Tap Screw
20.1| 4| S Washer
20.2| 4| Washer
| 21| 1| 0360-62095-01| Blade Guard Cover

K8

| K8| 1| 0360-90009-01| Hardware Kit
---|---|---|---|---
22| 4| Tap Screw
22.1| 4| S Washer
22.2| 4| Washer
A5| A5| 1| 0360-62099-01| Arbor Assembly
| 24| 1| 0360-62109-01| Gear Housing

K9

| K9| 1| ****

0360-90010-01

| Cord Strap Kit
25| 1| Strain Relief
27| 1| Strain Relief
29| 1| Cable Clamp
30| 1| Tap Screw
| 26| 1| 0360-62111-01| Vacuum Power Wire with Ter- minal
| 28| 1| 0360-62113-01| Main Power Cord 120v
| 31| 1| 0360-62116-01| Axle Spring

K10

| K10| 1| 0360-90011-01| Handle Hardware Kit
32| 2| Tap Screw
35| 6| Tap Screw
36| 2| Tap Screw

K11

| K11| 1| ****

0360-90001-01

| Saw Motor Main Handle
33| 1| Main Handle Up
34| 1| Main Handle Down

K12

| K12| 1| ****

0362-90015-01

| Spindle Lock Hardware Kit
37| 1| Spindle Lock Cover
38| 1| Spindle Lock
39| 1| Compress Spring
40| 1| Seal Pad
41| 1| Felt Seal
| 57| 1| 0360-62152-01| Torsion Spring Sleeve
| 59| 1| 0360-60002-02| Cord Grip

MOTOR ASSEMBLY

ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO| DESCRIPTION
---|---|---|---|---
SET| 42| 1| 0244-90068-01| Tap Screw (Set of 2)
| 43| 1| 0360-62128-01| End Cover
SET| 44| 1| 0244-90085-01| Screw (Set of 4)
A4| A4| 1| 0360-62130-02| Motor Housing Assembly
SET| 46| 1| 0360-90014-01| Saw Motor Brush (Set of 2)
SET| 47| 1| 0360-90015-01| Brush Cover (Set of 2)
| 48| 1| 0360-62136-01| Stator (120v)
SET| 49| 1| 0360-90019-01| Screw w/ Washer (Set of 2)
| 50| 1| 0360-62138-01| Bearing Bushing
A3| A3| 1| 0360-62139-01| Armature Assembly 120v
| 52| 1| 0360-62144-01| O-ring (Black)

SAW MOUNT

ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO| DESCRIPTION
---|---|---|---|---
A7| A7| 1| 0360-00130-01| Saw Mount Assembly
| 54| 1| 0360-62146-01| Blade Allen Wrench
| 53| 1| 0360-62145-01| Rubber Sleeve
| 31| 1| 0360-62116-01| Axle Spring
| 57| 1| 0360-62152-01| Torsion Spring Sleeve
| 55| 1| 0360-62058-01| Saw Mount Shaft
K1| K1| 1| 0360-62148-01| Shaft Retainer Plate Assembly
56.1| 1| Lock Pin Knob
56.2| 1| Shaft Retainer Plate
56.3| 1| Lock Pin
SET| 61| 1| 0360-90030-01| Flat Head Screw (Set of 2)
| 19| 1| 0360-62091-01| Flange, inside (Black oxide)
| 17| 1| 0360-62089-01| Flange, outside (Black oxide)
K2| K2| 1| 0360-90003-01| Outer Flange Hardware Kit
16| 1| Outer Flange Washer
15| 1| Hex Screw w/Washer
| 62| 1| MAS14-125AG| Masonry Blade 14″ x 1.25 – Gold
K19| K19| 1| 0360-90036-01| Shaft Stopper Hardware Kit
106| 1| Cap Screw
107| 1| Aluminium Sleeve
108| 1| Nylon Nut

ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO| DESCRIPTION
---|---|---|---|---
A6| 68| 1| 0360-90017-01| Top Deck Assembly
A9| 65| 1| 0360-90031-01| Upper Vacuum Housing Assembly
| 67| 1| 0360-00003-03| Dust Collection Tub
| 75| 1| 0360-00145-01| Filter Shield
A1| A1| 1| 0360-25001-01| Replacement Filter Assembly
| 71| 1| 0360-00148-01| Filter Access Panel
| 70| 1| 0244-00355-01| Filter Spin Knob
SET| 72| 1| 0360-90032-01| Screw (Set of 4)
| 73| 2| 0360-08002-01| Draw Catch
SET| 74| 1| 0360-90033-01| Screw (Set of 4)
| 76| 2| 0360-08001-01| Rotary Draw Latch

K22

| K22| 1| 0360-90040-01| Rotary Draw Catch/Latch Kit
73| 1| Draw Catch
74| 4| Screw
76| 1| Rotary Draw Latch

K14

| K14| 1| 0360-90022-01| Filter Tab Hardware Kit
77| 1| Filter Clean Tab
97.1| 1| Flat Washer
97.2| 1| Washer
97.3| 1| Screw

LOWER FRAME ASSEMBLY

ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO| DESCRIPTION
---|---|---|---|---
A2| A2| 1| 0360-90100-01| Vacuum Motor Assembly 120V
| 93| 1| 0360-00147-01| Vacuum Motor Cover
| 95| 1| 0360-00095-01| Filter Foam
K24| K24| 1| 0360-90042-01| Vacuum Motor Mount Kit
92| 1| Vacuum Motor Mount
96| 4| Screw
K17| K17| 1| 0360-90034-01| Vacuum Motor Mount Hardware Kit
101| 8| Screw
102| 8| Flat Washer
K23| K23| 1| 0360-90041-01| Vacuum Motor Housing Kit
87| 1| Vacuum Motor Housing
79| 1| Vacuum Motor Housing Gasket
K18| K18| 1| 0360-90035-01| Hardware Kit
103| 3| Round Head Screw
104| 3| Washer
105| 3| Flat Washer
| 89| 1| 0360-00089-01| Vacuum Motor Seal Gasket
K13| K13| 1| 0360-90020-01| iQ360XT Filter Spindle Kit
90| 1| Filter Spindle
88| 1| Filter Spindle Seal Gasket
K15| K15| 1| 0360-90023-01| Vacuum Motor Hardware Kit
80| 1| Crimp Terminal, Connectors
81| 1| Crimp Terminal, Housing
78| 2| Cable Seal
SET| 86| 1| 0360-90037-01| Vacuum Motor Housing Hardware Kit (Set of 8)

LABELS

WARRANTY

New iQTS244™ Dry Cut Tile Saw, sold by iQ Power Tools or an iQ authorized dealer is warranted to be free from manufacturing defects in normal service for a one year period from date of purchase by the original consumer purchaser. Warranty period for rental items is 90 days.
All iQ products must be registered either through our website or by mailing in the Warranty Card in order for the warranty to be active and valid. This Warranty shall not apply to any parts that have been subjected to misuse or improper service, damaged in transit or handling, altered or repaired by unauthorized representatives, or used with a blade that is not recommended by iQ Power Tools.
Any claim arising under this Warranty must be submitted by the original purchaser within the Warranty period specified above and must include proof of purchase. Within Warranty period, options are either to replace or repair any parts or components that are found to be defective by iQ Power Tools at no charge to the original purchaser.
iQ Power Tools shall not be responsible or obligated to pay for freight or other transportationrelated costs or expenses in connection with any defective products,  replacements, or components that are returned to iQ Power Tools facility or any authorized repair station.

Parts and labor needed to maintain products, and the replacement of components due to normal wear and tear, are the purchaser’s responsibility and are not covered by this Warranty. All products  or components replaced under Warranty becomethe property of the manufacturer. All replacement parts will be considered to be part of the original product and any Warranty on such parts will expire concurrently with this original Warranty.
iQ Power Tools will pay for parts and labor in connection with Warranty repairs conducted by iQ Power Tools or its authorized repair center.
Replacement parts installed by anyone else will be provided without a charge but this Warranty will not apply to labor charges in connection therewith.
IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF. iQ POWER TOOLS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.
The Warranty on the terms above is the only Warranty. This limited Warranty is expressly in lieu of all other Warranties, whether expressed or implied.

iQ360XT
Parts Manual
888-274-7744
www.iqpowertools.com

References

• iQ Power Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>