IQ sound IQ-5308DJBT Portable BT Speaker System Instruction Manual
- June 5, 2024
- IQ sound
Table of Contents
IQ sound IQ-5308DJBT Portable BT Speaker System
Warranty
Supersonic Inc.(“Supersonic”) warrants this product to the original purchaser
ONLY, to be free from defects in materials and workmanship under normal use,
for ninety (90) DAYS from the date of original purchase. Proof of purchase
(receipt) required. Please visit http://www.supersonicinc.com/warranty for
additional information.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Product features
- Ultra-low distortion amplifying circuit
- Digital karaoke, treble and bass independent adjustment
- Built-in MP3 encoding supporting U disk
- Unique appearance design
- Professional treble and bass gain controlling circuit
- Built-in battery for outdoor activities
- Professional high-effective loud-speaking unit
- Compatible to DVDNCD/PC and other sound sources
- Suitable for adaptor and charging
- Intelligent power switch charging circuit
CONTROL PANEL
-
POWER VOLUME CONTROL
Turn to adjust the volume lo the desired level. -
SV DC INPUT
USB charging cable / Adapter input 5V/1A. -
AUX INPUT
3.5mm Stereo jack can be used Jo connect a CD player, MP3player, smart phone and other audio sources. -
Previous Track
Skip to previous track -
play/ pause/ scan(TWS)
Playing the music, press it to play and pause music FM is on, press it to auto searching the FM station TWS mode, press in 3 seconds to auto searching another pairing speaker -
Next
Skip to next track. -
Mode/LED
Press to change mode(FM, Bluetooth, AUX, USB), and long press 3 seconds to control the LED light. -
USB PORT
USB entry port. -
MIC INPUT
6.35mm (1/4″) jack input for microphone. -
DISPLAY
It is a display to show the function for example current MODE, Bluetooth, FM, USB, AUX, etc
BLUETOOTH:
Turn on the speaker, and change the mode into “Bluetooth”.
Activate your Bluetooth device, find the nearby pairing list, select IQ-
5308DJBT, after “Ding”, connect successfully.
TWS Function
Connection: a mobile connect with a speaker(it is a main unit) by bt connection, turn on another bt connection from second speaker( subsidiary unit), then press and hold this “SCAN/TWS” button in 3 seconds on main unit that it can connect with subsidiary unit by TWS connection.
Warning
- Do not place objects on top of the device, as objects may scratch the device.
- Do not expose the device to dirty or dusty environments.
- Do not insert any foreign objects into the device.
- Do not expose the device to strong magnetic or electrical field.
- Do not use the device in the rain.
- Please check with your Local Authority or retailer for proper disposal of electronic products.
- Do not disassemble the device. Only a certified service technician should perform repair.
- The device has apertures to disperse heat. Do not block the device may become hot and malfunction as a result.
Common simple faults and guidance for operation and repair
Fault phenomenon | Simple fault analysis | Troubleshooting |
---|---|---|
Failing to electrify | The power switch is not opened |
The electricity quantity of built-in battery is totally
consumed
| Open power switch
Use power adaptor to charge the battery
No sound| Failing to input sound source
Failing to establish signal line
Main volume is switched to minimum
U disk playing has no sound
Faults with external signal source
Poor contact or damage of
external signal line
| Change signal source
Reconnect signal line
Properly adjust the volume knob
Inspect U disk or audio switch
Change signal source
Readjust or change signal line
If there is still fault after the inspection above, please contact the nearest local maintenance department! The product technology of our company is upgraded continuously and we will not inform of the change of product specification and function additionally!
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device
and its antenna(s) must not be co-located or operation in conjunction with
antenna or transmitter any other
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>