TSI Link A B Comparison Workbook User Guide
- July 12, 2024
- tsi
Table of Contents
TSI Link A B Comparison Workbook
TSI Link A B Comparison Workbook
Overview
The A-B Comparison workbook contains a set of worksheets for TSI Link™ Report Creator that support comparative analyses. A-B comparisons are useful to compare two events, conditions, or locations. Some examples include:
- Before and after an engineering control is installed
- Upstream and downstream of an air filter
- Indoor versus outdoor
- Summer versus winter
- With a machine in operation versus not in operation
- Sample point versus an established baseline
The templates in this workbook are designed to make comparative analysis between any two studies efficient and insightful. It supports a variety of measured including sound, particulate matter, and gases. Each worksheet is described below.
If you are new to Report Creator, check out the Report Creator Product Page for guides and videos including: setting up an account, installing the application, using the study manager, using the layout view, customizing report creator templates, etc. This application guide builds upon and supplements those guides. This guide does not duplicate all of the content on those guides.
A-B Comparison Worksheets
The table below lists the worksheets available in the A-B comparison workbook.
Worksheet Template| Supported Measurements| Supported
Instruments| Examples of Applications
---|---|---|---
IAQ Gas – N umber Con c entration| CO2 (ppm)
Formaldehyde, CHOH (ppb)
CO (ppm)
Ozone, OJ (ppb)
NO2(ppb)
Cl (ppm)
Ammonia, NHJ (ppm)
voe (ppb & ppm)| Omni Trak™ Q-Trak™ XP| ✓ IAQ impact studies
✓ “What is that smell?”
Troubleshooting
✓ Remediation Analysis
P M – Mas s C o n c entr a ti
o n| PM 1.0
PM2.5
PM4.0
PM 10| Omni Trak™
Q-Trak™ XP
DustTrak™
AM520| ✓ Remediation Analysis
✓ Proactive IAQ checking of schools commercial buildings and office buildings
with and without people
P M – Number C o n c entr a tion H &S
(Note 1)| NC 0.3 – 0.5 um
NC 0.5 – 1.0 um
NC 1.0 – 2.5 um
NC 2.5 – 4.0 um
NC 4.0 – 10 um| Omni Trak™| ✓ Industrial Hygiene analysis
✓ Checking of manufacturing cleanliness
✓ Studies of working environment adjustments
P M – Number C o n c entr a tion I
AQ| NC 0.3 – 0.5 um
NC 0.5 – 1.0 um
NC 1.0 – 2.5 um
NC 2.5 – 5.0 um
NC 5.0 – 10 um| Q-Trak™ XP A100| ✓ Measuring HVAC adjustment
✓ Analyzing effectiveness of a mobile filter
✓ Air Quality in an empty vs full public space
So u nd – B r oa d b and| LCS
LCF
LCI
LAS
LAF
LAI
LZS
LZF
LZI| Omni Trak™ Casella™ 620| ✓ Analysis of community noise
✓ Manufacturing sounds studies
✓ Analyzing impact of engineering adjustments
Sound – Octave Band| LZS octave band| Casella™ 620| ✓ Public or
commercial spaces
✓ Classroom studies
Configurable Report| See Note 2| | Thousands of possibilities!
Notes:
-
There are two versions of the PM Number Concentration worksheet. The difference between the two is size cut point in the second highest channel. The “H&S” version has a 4.0 um cut point to reflect the respirable size range.
The “IAQ” version has a 5.0 um cut point to reflect the MERV filtration range. -
The Configurable Report workbook allows you to select up to three measurements in a study from a large list. This configuration is made at the bottom of the Cover worksheet. See the Configurable Report section for more detail.
Worksheet Steps
This workbook and it worksheets leverage the common Report Creator Functions – Customizing, Study Manager, Importing Tests, Layout View, etc. – for instructions on those functions see the Report Creator Product Page.
The worksheet templates within this workbook has a similar structure. This section outlines the basic operating steps for all of them. Unique analyses for different worksheets are discussed in Step 5 Analyze Data.
Step 1 Select a Worksheet
The A-B Comparison workbook is one of many that are available. An overview of the workbooks available is on the Report Creator product page.
The overview of worksheets in the prior section provides guidance on the A-B Comparison Worksheets.
Step 2 Cover Sheet
This workbook contains a very simple Cover sheet that can be customized to suit your needs. See the Customizing Report Creator Templates to learn how. Other sheets can be added to your workbook1 if desired.
The bottom of the Cover sheet includes a configuration tool for the
Configurable Report. This configuration tool is discussed below. If the Cover
sheet is deleted from the workbook, the Configurable Report will not be
functional.
Configurable Report Set up
The worksheets discussed above import specific measurement data. But the TSI instrument portfolio can generate a wide range of measurements. It would be impractical to create templates for all possible permutations. The Configurable Report provides a way for you to define an A-8 comparison for any three measurements you like.
The configuration is performed at the bottom of the Cover sheet.
You can give the Configurable Report a unique name, if desired.
Then select up to three measurements.
Save the workbook template and open Report Creator. You will see your name
appear in the worksheet selection list.
After adding the worksheet, the name of the Report will appear in cell A 1 of
the template.
After you add the data, the parameters will be summarized in 14 through 20,
with additional charts and data further down.
NOTICE
The Layout View functionality is not supported for the Configurable Report.
Step 3 Enter Demographic Information and Test Names
After you have created a blank worksheet, you can enter whatever demographic
information you want into your report. Start by changing the default Test 1
and Test 2 to something more meaningful, if desired.
These names are highlighted in blue in the Test Results table. In the example
picture, we have changed the names to Printer Off and Printer On. All the
other headers are automatically updated with the new labels.
You can also add or edit target maximum limits for each gas in Row 15. If you do not want to display a target limit, simply leave the cell blank.
NOTICE
You can also enter target limits into the worksheet templates if you want to make them static and avoid re-entering them. Refer to Customizing Report Creator Templates.
Step 4 Load Study Data
Load up to two studies using STUDY MANAGER or File Import. For background see the Study Manager Guide.
Make sure the study names match the labels you added above. Swap them if necessary. When ready, click Add Data to import data into the worksheet.
Step 5 Analyze Data
Target Limits
Target limits for the maximum values, as highlighted above, may be changed.
These limits will be displayed on the chart to provide context.
Each measure and the target limit are displayed in a chart, along with the target limits defined in the data summary table.
Test Results
The Test Results section includes one or more tables to display maximum, average, and minimum values for each measurement. If you have added a target limit, the summary measurement will turn red if the target was exceeded.
The percentage comparison is also calculated for each measurement.
Time charts are also displayed for each gas, along with the target limits. You
can use Excel’s drawing tools to highlight or annotate the charts if desired.
See Getting Started with TS/ Link Report Creator for more information on
annotation.
PM – Mass Concentration
The PM – Mass Concentration worksheet includes a speedometer chart
visualization to help readers better contextualize the numbers.
This is based on the US Air Quality Index scale. This visualization can be
removed from your template if it is not useful.
Sound – Broadband
The Sound – Broadband worksheet is a column chart that includes all the
available measurements.
Sound – Octave Band
The Sound – Octave Band worksheet is a column chart that includes all octave
band frequencies.
Layout View Analysis
The Layout View provides the ability to compare both studies spatially. In the example below, the Maximum PM2.5 measurements are displayed on a building floorplan. A photo, diagram, map, or any image can be used as the background.
The Layout View is supported in all worksheets except the Configurable Report. But keep in mind that there are only two locations available in these worksheets. If you would like to analyze more locations, consider using the Spatial Analysis workbook instead.
If you wish to use Layout View, you may want to add space for Spatial Analysis, as discussed in Customizing Report Creator Templates.
Step 6 Complete the Assessment
To complete the report, you can add recommendations under the Conclusions section.
The print layout for this sheet does not include the measurement data in the
blue tables at the bottom of the sheet.
They will not appear in a PDF export either.
CUSTOMER SUPPORT
TSI Incorporated – Visit our website www.tsi.com for
more information.
USA Tel : +1 800 680 1220
UK Tel : +44 149 4 459200
France Tel : +33 1 41 19 21 99
Germany Tel : +49 241 523030
India Tel : +91 80 67877200
China Tel : +86 10 8219 7688
Singapore Tel : +65 6595 6388
TSI and the TSI logo are registered trademarks of TSI
Incorporated in the United States and may be protected
under other country’s trademark registrations.
P/N 6017853 Rev. B (US)
©2024 TSI Incorporated
Printed in U.S.A.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>