iQ POWER TOOLS iQ426HEPA US Cyclonic Dust Extractor Owner’s Manual
- June 4, 2024
- iQ POWER TOOLS
Table of Contents
Owner’s Manual
iQ426HEPA US
Parts Manual
iQ426HEPA US Cyclonic Dust Extractor
FRONT ANGLED VIEW
SIDE VIEWS
VACUUM SYSTEM VIEW
HANDLE AND CONTROL THE BOX
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
K1
| K1| 1|
0426-90001-01
| Handle Kit
62| 1| Main Top Housing Handle
65| 1| Screw, M5x15mm
66| 1| Screw, M5x16mm
K2
| K2| 1|
0426-90014-01
| Handle Hook Kit
63| 1| Handle Hook
64| 1| Screw, M5x16mm
| 22| 1| 0426-00022-01| Over Load Protector 15A
| 23| 1| 0426-00023-01| Mode Switch
| 24| 1| 0426-00024-01| On/Off Switch
SET| 32| 4| 0426-90041-01| Screw, M4 x 12mm (Set of 4pc)
K9
| K9| 1|
0426-90019-01
| Power Cord Kit (120V)
21| 1| Power Cord 10′
96| 1| Wire Clip
101| 1| Wire Sleeve
K11
| K11| 1|
0426-90021-01
| Control Box Kit
18| 1| Screw, Pan Head, M4 x 12L
19| 1| Wire Clamp
20| 1| Control Box
25| 1| HEPA Filter LED Indicator
K10
| K10| 1|
0426-90020-01
| PCB Wire Kit
26| 2| Jumper Wire, Red
27| 1| Jumper Wire, Black
28| 1| Jumper Wire, White
29| 1| Jumper Wire, Red
30| 1| Jumper Wire, Black
31| 1| Jumper Wire, Black
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
K8
| K8| 1|
0426-90018-01
| PCB Board Kit
6| 1| Gasket
7| 1| PCB Heat Sink
8| 1| Screw, M4 x 12mm
9| 1| SIL-PAD 400
10| 1| PCB Module (120v)
11| 1| Tapping Screw, M4x8mm
12| 1| Silicon Hose
110| 1| Plug
K12
| K12| 1|
0426-90022-01
| PCB Screw Kit
13| 1| Grounding Plate
14| 6| Tooth Lock Washer
15| 3| Tapping Screw
16| 2| Screw, M4x12mm
17| 1| Seal
VACUUM SYSTEM
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A1| A1| 1| 0426-25008-01| Vacuum Cyclone Assembly
K3| K3| 1| 0426-90015-01| Vacuum Inlet Kit
53| 1| Vacuum Inlet
54| 1| Vacuum Inlet Front Cover
55| 4| Screw, M4x12mm
56| 1| Vacuum Inlet Lower Cover
57| 3| Screw, M4x12mm
58| 2| Screw, M4x25mm
59| 4| Screw, M4x12mm
60| 1| Receptacle
61| 1| Vacuum Inlet Top Cover
A2| A2| 1| 0426-25003-01| Vacuum Body Assembly
| 42| 1| 0426-00042-01| HEPA Door
| 41| 1| 0426-25002-01| Replacement HEPA Filter
K6| K6| 1| 0426-90017-01| Tub Latch Kit
34| 2| Tub Latch Mount
35| 2| Shaft
36| 2| Handle Linkage
37| 2| Tub Latch Shaft
38| 2| Spring
39| 2| Tub Latch
| 47| 1| 0244-00355-01| Filter Spin Handle
SET| 46| 1| 0426-90043-01| Screw M5x15mm (Pack of 5)
K7| K7| 1| 0426-90038-01| Filter Cover Kit
44| 1| Bushing
45| 1| Filter Housing Cover
| 43| 1| 0426-25001-01| Replacement Vacuum Filter Kit, 8 x 6 Durabond Filter
| 70| 1| 0426-00070-01| Filter Tab
K5|
K5
| 1| 0426-90016-01| Valve Assembly
2| Valve Plate
8| Rivet
4| Valve Rib
2| Valve Door
1| Valve Board
6| Screw, M4 x 12mm
8| Flat Washer
VACUUM MOTOR
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A5| A5| 1| 0426-25004-01| Vacuum Motor Assembly
K14| K14| 1| 0426-90024-01| Vac Motor Cover Hardware Kit
48| 5| Screw M5 x 30mm
116| 5| S Washer
117| 5| Flat Washer
K27| K27| 1| 0426-90023-01| Vac Motor Cover Kit
49| 1| Motor Cover Frame
51| 4| Screw, M4 x 12mm
K13| K13| 1| 0426-90037-01| Vac Motor Cap Kit
50| 1| Motor Cover
52| 4| Tapping Screw, M5x16mm
A6| A6| 1| 0426-25010-01| Vacuum Motor End Cap Assembly
208| 1|
213| 1|
A7| A7| 1| 0426-25005-01| Armature Assembly (120V)
216| 1|
220| 1|
221| 1|
222| 1|
K29| K29| 1| 0426-90040-01| Vacuum Motor Fan Kit
226| 1| Flange, Fan
228| 1| Fan
229| 1| Flat Washer
230| 1| Hex Nut
231| 1| Cover, Fan
| 214| 1| 0426-00214-01| Motor Housing Cord
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
K28| K28| 1| 0426-90052-01| Vacuum Motor Housing Kit
223| 1| Strain Relief
224| 1| Motor Sound Shield Housing
225| 1| Filter Door Gasket
K18| K18| 1| 0426-90027-01| Stator Hardware Kit
218| 2| Lock Washer
219| 2| Screw M5x40mm
| 217| 1| 0426-00217-01| Stator 120V
K17
| K17| 1|
0426-90026-01
| Motor Hardware Kit
204| 4| Screw, M4 x 12L
205| 2| Brush Cover Hold Housing
206| 2| Brush Cover Hold Plate
209| 1| Space Ring Fan
210| 4| Screw M5 x 30mm
211| 4| S Washer
212| 4| Flat Washer
215| 1| Valve Washer
SET| 207| 2| 0426-90046-01| Carbon Brush (Set of 2)
| 214| 1| 0426-00214-01| Motor Housing Cord
HOSE AND TUB
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A12| A12| 1| 0426-25011-01| Hose Assembly
| 94| 1| 0426-00094-01| Soft Swivel Hose
A9| A9| 1| 0426-25006-01| Tub Assembly
401| 1| TUB
402| 2| Tub Front Wheel
403| 16| Screw
404| 2| Tub Rear Wheel
SET| 402| 2| 0426-90047-01| Tub Front Wheel (Set of 2)
SET| 403| 16| 0426-90048-01| Screw (Set of 16)
SET| 404| 2| 0426-90049-01| Tub Rear Wheel (Set of 2)
CART ASSEMBLY
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A10| A10| 1| 0426-25007-01| Cart Assembly
K19| K19| 1| 0426-90028-01| Cart Lift Latch Kit
505| 1| Lift Latch Top
506| 1| Wheel PIN
507| 1| Sleeve upper
508| 1| Sleeve lower
509| 2| Screw, M4 x 12L
510| 1| Spring
511| 1| Lift Latch PIN
512| 1| Lift Latch Bottom
513| 5| Screw, M4 x 12L
K20
| K20| 1|
0426-90031-01
| Cart Release Hook Kit
533| 1| Release Hook
534| 1| Release Hook Spring
K21| K21| 1| 0426-90029-01| Cart Handle Release Hook Hardware Kit
514| 2| Screw, M8 x 55L
515| 2| Curved Washer M8
516| 2| Saddle Washer
517| 3| Washer, Flat M8
518| 2| Hex Nut, M8
K22| K22| 1| 0426-90030-01| Cart Rear Wheel Hardware Kit
519| 2| Washer, M8
520| 2| Bushing
522| 2| Flat Washer
523| 2| Bolt, M8 x 70L
535| 2| S Washer
K23
| K23| 1|
0426-90032-01
| Cart Front Wheel Kit
531| 2| Cart Front Wheel
532| 2| Washer
SET| 521| 2| 0426-90050-01| Cart Rear Wheel (Set of 2)
K24| K24| 1| 0426-90033-01| Frame Release Kit
524| 1| Pin
525| 1| Spring
526| 1| Knob
527| 1| Screw
ACCESSORY RACK & ACCESSORIES
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
K25
| K25| 1|
0426-90034-01
| Accessory Rack Bracket Kit
609| 1| Rack Bracket Left
610| 1| Rack Bracket Right
611| 8| Screw
| 608| 1| 0426-00608-01| Accessory Rack
K26| K26| 1| 0426-90035-01| Hose Extension Kit
| 601| 1| 0426-00601-01| Hose Adapter
| 602| 2| 0426-25051-01| House Extension
| 603| 1| 0426-00603-01| Nozzle Flat
| 604| 1| 0426-00604-01| Nozzle Flat
| 612| 1| 0426-00612-01| Brush Roller
LABELS
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK – DO NOT USE IT ON WET SURFACES. DO NOT EXPOSE TO RAIN. STORE INDOORS.
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
| Label| 1| ****
0426-12001-01
| Label Sheet
| 805| 1| Serial Label
| 806| 1| Warning Label
| 809| 1| Specification Label
| 810| 1| Plate Label
| 811| 3| Arrow Label
| 812| 1| Label
| 813| 1| Spin Label
| 815| 1| Release Label
| 816| 1| Step Label
WARRANTY
New iQ426HEPA™ Dust Extractor, sold by iQ Power Tools or an IQ authorized
dealer is warranted to be free from manufacturing defects in normal service
for a one-year period from the date of purchase by the original consumer
purchaser. The warranty period for rental items is 90 days.
All iQ products must be registered either through our website or by mailing in
the Warranty Card in order for the warranty to be active and valid. This
Warranty shall not apply to any parts that have been subjected to misuse or
improper service, damaged in transit or handling, altered or repaired by
unauthorized representatives, or used with a blade that is not recommended by
iQ Power Tools.
Any claim arising under this Warranty must be submitted by the original
purchaser within the Warranty period specified above and must include proof of
purchase. Within the Warranty period, options are either to replace or repair
any parts or components that are found to be defective by iQ Power Tools at no
charge to the original purchaser. IQ Power Tools shall not be responsible or
obligated to pay for freight or other transportation-related costs or expenses
in connection with any defective products, replacements, or components that
are returned to the IQ Power Tools facility or any authorized repair station.
Parts and labor needed to maintain products, and the replacement of components
due to normal wear and tear, are the purchaser’s responsibility and are not
covered by this Warranty. All products or components replaced under Warranty
become the property of the manufacturer. All replacement parts will be
considered to be part of the original product and any Warranty on such parts
will expire concurrently with this original Warranty.
IQ Power Tools will pay for parts and labor in connection with Warranty
repairs conducted by iQ Power Tools or its authorized repair center.
Replacement parts installed by anyone else will be provided without a charge
but this Warranty will not apply to labor charges in connection therewith.
IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT
COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF. iQ POWER TOOLS SHALL NOT
BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE
OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.
The Warranty on the terms above is the only Warranty. This limited Warranty is
expressly in lieu of all other warranties, whether expressed or implied.
888-274-7744
www.iqpowertools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>