IQ sound IQ-1525BT Wireless Bluetooth Speaker User Manual

[

](https://manuals.plus/wp-content/uploads/2022/07/IQ-SOund.png)

IQ sound IQ-1525BT Wireless Bluetooth Speaker

Product Overview

1. MODE: Modes wilch, switch from BTS, TF/SDCard, USB, AUXin, FM radio

2. VOL -/+: Turn the volume control knob to make the volume Increase or decrease

3. Play the previous song under BTS, TF card and USB mode, Play previous radio station under FM mode.

4. Play pause, press and hold for full frequency automatic searching under FM mode.

5. Play the next song when under BTS, TF/SD card and USB mode, Play next radio station under FM mode.

6. DC 5V: Charge Jack, plug In USB charger cord to charge the bu lit-In battery, when charging cable insert into USB ac!aptor or computer USB port LED lights will light up

7. AUX: AUX in can connect to PC, mp3 players, smart phones, or CD walkman, you can also use headphones.

8. BASS: Adjust bass, control +/- to enjoy the bass effect

9. OFF/ ON: Turn volume knob clockwise to power +ON, Turn volume knob counterclockwise to power-OFF
   

10. USB PORT: Support USB(2.0 version, 32MB-64GB) and can play Mp3 and WAV formatted music in the USB flash drive

11. TF/SD CARD PORT:  support TF/S D card and can play MP3 and WAV formatted music in card.

12. BLUETOOTH: Use the MODE button on the unit to change the mode to Bluetooth mode. Access your devices Bluetooth settings and pair your device to the unit.
    The Bluetooth pair name is “IQ-1525BT” (Bluetooth distance: around 10 meters) When the correct mode has been selected, you can than use (the backward)./ll(play/pause) and (the forward) controls on tha unit to play music

13. ACCESSORY: USB power charger cord, AUX In cable, user manual and shoulder belt.

Specifications

• Output Power: 16W
• Frequency Response: 100HZ-18KHZ
• SNR: >80dB
• THD: <1%(1W 1kHz )
• Battery: built-in 2400mAh rechargeable battery
• Charging time: 3-4 hours, Playing time: 1.5-2 hours
• Power supply voltage: 500mA DC 5V/USB 2.0 version

Functions

1. Product dimensions: 355x17Bx190mm
2. Built-in Mp3 digital decoder for decoding and playing Mp3 fi less, it brings you perfect sound quality.
3. External TF/SD card and USB socket to enjoy music
4. With mini control key for selections end volume adjustment. easy to operate.
5. Micro USB integrated charging, supply with charging cable.
6. Built-in low power/low distortion 1 OW, 5.25″ hi-fi speaker, with low distortion power amplifier, Bass control. It gives you high fidelity and original sound.
7. Built-in 2400mAh rechargeable battery, large capacity which you can enjoy longer playing time.
8. Digital LED display shows working status.
9. FM digital radio(87.5-108MHZ), listen to the latest news.
10. Can connect to any audio output equipment, such as mobile phones, Mp3, Mp4, laptops etc.

Warranty: Supersonic Inc. Warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, For ninety(90) DAYS from the date of original purchase. Proof of purchase (receipt) required. Please viol! http://www.suparsonlclnc.com/warranty for additional information.

May not charged.

| Plug in power cord properly.

Plug in charger cord for 3-4hrs till fully charge.

No sound or weak:| Check volume levels

Check volume on pair device if it’s low.

| Increase vol+ button on unit or press/turn vol+ clockwise

Increase vol+ on paired device.

Sound distortion:| Volume level too high

Too close to other frequency devices

| Reduce volume levels hold or turn Vol- on unit

Move device away from other paired devices

Weak Radio Reception:| Bad reception area/bad signals

No FM stations doesn’t scan at all.

| Move antenna/wire or move area for better signal.

Extend FM antenna on unit or replace it if damaged.

USB/SD no detect music:| Make sure USB drive is connected firmly. Check files are in correct format

Press Mode button to USB

| Check for damage pins or try another USB flash drive

Transfer music files in MP3 decoding without folders. Verify USB version is 2.0 and File format in FAT32

Bluetooth don’t connect:| Check BT device is compatible BT version

Make sure the BT is ON/check mode is on BT Not paired to correct BT device

| Should work with iPhone 4s and above Android 4.3 and above. Restart both devices to reconnect/pair again.

Check BT name is “IQ-1525BT”paired “Connected”/check your BT settings.

Auxilary doesn’t detect: Auxilary Low Sound| Check aux cord is not damage Doesn’t play automatically

Auxilry cord not detectiong on unit.

| Pull out aux cord and reconnect.

Press Mode button to change to AUX mode

Try a new aux cord. plug in the correct aux port.

CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN

FCC Warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>