IQ sound IQ-6812DJBT Portable Bluetooth Speaker System User Manual

OPERATION MANUAL
IQ-6812DJBT

Carefully read operating manual to operate this unit properly, and keep this manual handy for further reference.

PANEL FUNCTION

1.MODE
2.MIC.PRI
3.REPEAT
4.EQ
5.LED MODE
6.MIC.VOL
7.ECHO
8.MIC1| 9.MIC2
10.LINE IN
11.DC5V OUT\MAX 1A
12.TF CARD
13.USB
14.TREBLE
15.BASS
16.TWS| 17.VOICE CUT
18.REC
19.REC PLAY
20.Sound Change
21.PREV
22.PLAY
23.NEXT
---|---|---

REMOTE CONTROL FUNCTION

1. POWER
2. MODE
3. LED
4. MUTE
5. Control prev key
6. Play/pause control key
7. VOL+
8. Control next key
9. VOL-
10. REPE
11. E/Q
12. 0-9

FUNCTION DESCRIPTION

• OPERATION INSTRUCTION FOR KARAOKE & WIRELESS MICROPHONE

1. Insert the microphone plug into the microphone input MIC2.
2. Adjust the microphone volume knob MIC VOL for proper volume.Then adjust the echo depth to the proper position. Now you can start the karaoke.
3. Open wireless MIC” on & off” button,Adjust the microphone volume knob MIC VOL for proper volume. and adjust the echo depth to the proper position. The you can start the wireless Microphone.

• BT Connection

1. When using the Bluetooth,please tap Settings,then open “Bluetooth”
2. Scan from your phone,tablet,notebook for” IQ-6812DJBT “and pair the device to listen audio files through speaker.
3. Unpair from speaker when finished listenning.

• FM FUNCTION

1. Choose”MODE”to switch to FM radio
2. Choose”PLAY/PAUSE”forautomatic searching and saving.
3. Choose”PREV”and”NEXT”to switch channels.

• Using Microphone

1. When using Microphone-plug your microphone into the microphone jack on unit main control panel.
2. Use the MIC VOL knob to control the voice level of the microphone
3. Use the”ECHO” knob to control microphone echo.

• Using Aux( LINE IN 3.Smm)

1. Press the audio input on unit main panel on the top
2. Insert the Aux cable plug into the Aux input ,then connect with your phone,tablet,notebook for using.
3. Pull out the cable when finished listenning.

• Using Guitar Jack.

1. When using Guitar-plug your guitar into the guitar jack on unit main control panel.
2. Use the Guitar VOL knob to control the volume level of the Guitar. “BASS”&”TREBLE” on unit control panel can be used to adjust sound when using MICRO SD, USB,FM.”EQ” button on unit control panel or remote control can be used to adjust sound effect to preset levels.

• USB AND MICRO SD CARD

1. MP3 playback via USB (Max 64GB)
2. MP3 play back via Micro SD (Max 64GB)

• Charging Instructions;

1. The IQ-6812DJBT takes approximately 8 hours to fully charge.

2. The IQ-6812DJBT will automatically begin charging once the power cord is connected to a power source and power switch is set to ON.
   The unit will also power on when connected to a power source even if the battery power is low.
   When the battery is full, the charging indicator light on the front panel will OFF

3. with standard usage, a fully charged battery can play for about 1.6 hours..
   IQ-6812DJBT IQ-6812DJBT 8 1.6

• Accessories included package contains

1. Instruction book …… 1 PC
2. Power Line ……….. 1 PC
3. Wireless Mic ……… 1 PC
4. Remote control .. 1PC
5. Aux Line………. …. 1PC

MAIN TECHNICAL PARAMETER

Warranty
Basic Warranty Statement
Supersonic lnc.{“Supersonic”) warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) required. Please visit http://www.supersonicin.com/warranty for additional information.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>