iQ POWER TOOLS iQ228CYCLONE CE 7 Inch Dry Cut Tile Saw Instruction Manual
- June 4, 2024
- iQ POWER TOOLS
Table of Contents
iQ POWER TOOLS iQ228CYCLONE CE 7 Inch Dry Cut Tile Saw
FRONT ANGLED VIEW
BACK ANGLED VIEW
TRU-CUT® SYSTEM
TRU-CUT® SYSTEM
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A1| A1| 1| 0228-25400-01| iQ228CYCLONE Micro Fence
A2| A2| 1| 0228-25700-01| iQ228CYCLONE Standard Fence (Metric System)
A3| A3| 1| 0228-25800-01| iQ228CYCLONE Rolling Table (Metric System)
K7| K7| 4| 0228-90007-01| Right Rolling Wheel
K6
| K6| 3| 0228-90006-01| Left Rolling Wheel Retainer Kit
83| 1| Retainer
50| 1| Screw
K9| K9| 2| 0228-90009-01| Right Guide Wheel
| 49| 1| 0228-00049-01| Gliding Strip
MAIN BODY
MAIN BODY
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A4| A4| 1| 0228-90001-01| Blade Guard Assembly
K1
| K1| 1| 0228-90002-01| Riving Knife Kit
88| 1| Riving Knife
123| 2| Screw
K8
| K8| 1| 0228-90008-01| Right Guide Rail Kit
41| 8| Washer
47| 1| Guide Rail
48| 8| Screw
K17
| K17| 1| 0228-90018-01| Left Guide Rail Kit
89| 1| Guide Rail
115| 4| Screw
K16
| K16| 1| 0228-90017-01| Toggle Table Stop Kit
44| 1| Toggle Stop
45| 1| Spring
46| 1| Screw
K15
| K15| 1| 0228-90016-01| Right Handle Kit
40| 2| Screw
41| 2| Washer
42| 1| Handle
K2
| K2| 1| 0228-90003-01| Rubber Foot Kit
38| 2| Rubber Foot (Front)
39| 2| Rubber Foot (Rear)
A9| A9| 1| 0228-25005-01| Side Vent Panel Assembly
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
K14
| K14| 1| 0228-90015-01| Support Foot Kit
40| 2| Screw
41| 2| Washer
62| 2| Nut
95| 2| Support Foot (Bottom)
97| 2| Support Foot (Top)
98| 2| Screw
| 96| 1| 0228-00096-01| Left Handle
| 138| 1| 0228-00238-01| Power Cord 230v
| 103| 1| 0228-00203-01| Overload Protector 10A
K3
| K3| 1| ****
0228-90019-01
| Main Switch Kit (230v)
104| 1| Main Switch (230v)
105| 1| Switch Panel
K5
| K5| 1| 0228-90010-01| Dust Tray Latch Kit
113| 1| Pin
114| 1| Pin
115| 1| Screw
116| 1| Buckle Hinge
117| 1| Latch
118| 2| Screw
| 14| 1| 0228-00014-01| Dust Tray
| 29| 1| 0228-00029-01| Wrench
SAW MOTOR
SAW MOTOR
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A6| A6| 1| 0228-25006-01| Saw Motor Assembly 230V
K10| K10| 1| 0228-90011-01| Saw Motor Brush Set (120V/230V)
K11| K11| 1| 0228-90012-01| Saw Motor Brush Cap Set (120V/230V)
A7| A7| 1| 0228-25003-01| Vacuum Fan Assembly
K4
| K4| 1| 0228-90005-01| Outer Flange Kit
19| 1| Flange, Outside
20| 1| Flange Screw
VACUUM HOUSING
VACUUM HOUSING
ASSEMBLY KIT / SET| ITEM NO| QTY| PART NO|
DESCRIPTION
---|---|---|---|---
A8| A8| 1| 0228-25004-01| Cyclone Housing Assembly
| 34| 1| 0228-00034-01| Filter Housing Knob
| 21| 1| 0228-00021-01| Dust Tray Gasket
K12
| K12| 1| 0228-90013-01| Filter Spindle Lock Plate Kit
125| 1| Gasket
110| 1| Filter Spindle Lock Plate
10| 3| Screw
K13
| K13| 1| 0228-90014-01| Filter Spindle and Hose Kit
109| 1| Gasket
100| 1| Filter Spindle
124| 2| Locking Round Hoop
99| 1| Hose
A5| A5| 1| 0426-25001-01
0426-25001-02
| Filter Replacement Assembly
WARRANTY
New iQ228CYCLONE® 7” Dry Cut Tile Saw, sold by iQ Power Tools or an iQ authorized dealer is warranted to be free from manufacturing defects in normal service for a one year period from date of purchase by the original consumer purchaser. Warranty period for rental items is 90 days.
All iQ products must be registered either through our website or by mailing in the Warranty Card in order for the warranty to be active and valid. This Warranty shall not apply to any parts that have been subjected to misuse or improper service, damaged in transit or handling, altered or repaired by unauthorized representatives, or used with a blade that is not recommended by iQ Power Tools.
Any claim arising under this Warranty must be submitted by the original purchaser within the Warranty period specified above and must include proof of purchase. Within Warranty period, options are either to replace or repair any parts or components that are found to be defective by iQ Power Tools at no charge to the original purchaser. iQ Power Tools shall not be responsible or obligated to pay for freight or other transportation-related costs or expenses in connection with any defective products, replacements, or components that are returned to iQ Power Tools facility or any authorized repair station.
Parts and labor needed to maintain products, and the replacement of components due to normal wear and tear, are the purchaser’s responsibility and are not covered by this Warranty. All products or components replaced under Warranty become the property of the manufacturer. All replacement parts will be considered to be part of the original product and any Warranty on such parts will expire concurrently with this original Warranty.
iQ Power Tools will pay for parts and labor in connection with Warranty repairs conducted by iQ Power Tools or its authorized repair center. Replacement parts installed by anyone else will be provided without a charge but this Warranty will not apply to labor charges in connection therewith.
IN NO EVENT SHALL ANY LIABILITY UNDER THIS WARRANTY EXCEED THE REPLACEMENT COST OF ANY DEFECTIVE PRODUCT OR COMPONENT THEREOF. iQ POWER TOOLS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER DAMAGE OR LOSS NOT EXPRESSLY ASSUMED AS SET FORTH HEREIN.
The Warranty on the terms above is the only Warranty. This limited Warranty is expressly in lieu of all other Warranties, whether expressed or implied.
CE
Parts Manual
888-274-7744
www.iqpowertools.com