morepro FT35 Smart Watch User Manual
- June 4, 2024
- morepro
Table of Contents
User Manual
www.morepro.cc
service@morepro.cc
Appearance introduction
Operation for
screen
Install APP
Scan the QR code on the right or enter the APP market to download and install “H Band”. (compatible system: Android 5.0/10S 9.0 and above; Bluetooth 5.1)
https://www.vphband.com/hband/hband.html
Charging/Activation
Please charge and activate the watch for first-time use. Connect the watch and magnetic charging wire according to the following figure, and connect the USB end of the charging wire to the power supply. (The watch will be fully charged for around 2 hours.)
Changing the strap
Please remove the strap according to the following figure; use the opposite
operation to install the strap.
Connect the watch
Open APP and click mine >disconnected, Click ‘device name”. (Please make sure that the phone has turned on Bluetooth)
Data storage
3—day health and exercise data could be stored in the watch. Log in to the APP
with an account and synchronize the data, then the data could be stored on the
ECS for 1 year.
Motion monitoring
If a watch is worn normally, it will automatically monitor your steps, distance, and calorie data. (the watch will clear data of the last day at 0:00 every day.) You can view the movement data a day at the home page of APP; click the sport module to view the detailed data and historical data.
Sleep monitoring
The watch will automatically monitor your sleep and analyze waking time, deep
sleep, light sleep; Opening a scientific sleep function in the APP will
improve the sleep monitoring accuracy of the watch.
You can view the sleep data a day at the home page of the sleep module; click
the sleep module to view the data analysis and historical data.
Opening the scientific sleep function will increase power consumption and
reduce battery life.
Measurement of health data
- The watch could measure relative health data after being changed to the following function interface.
- Keep the automatic measurement function “on” for the following functions in the APP, then the watch will automatically measure relative health data periodically and continuously. (It will reduce the endurance of the watch if the automatic measurement works.)
The current health
data could be viewed on the APP home page. Click the corresponding module to
check the data details and historical data.
ECG Measurement
- Start ECG measurement at the app, and you can view the ECG dynamic graphics report on the APP interface. (Before measurement, please make sure that your left arm and right finger have fully contact with the watch electrode).
Click the ECG module on the APP homepage to view ECG historical data.
- Switch the watch to the ECG function interface and click the screen to start ECG measurement. (ECG measurement at the watch, the graphics report will not be obtained, and the data cannot be uploaded to the APP)
HRV
Click the HRV module on the APP homepage to view the heart health index,
Lorenz scatters Diagram, HRV data, and historical records. (Please open the
scientific sleep function at the app and make sure that wearing a watch for
more than 4 hours at night from 0: 00 ∼ 7:00, otherwise, the HRV analysis
report cannot be obtained.)
Sports mode
The watch supports 20 kinds of workouts. You can view the movement details and
historical data through the APP movement module at the end of the training.
Message
reminder
Keep the watch connected with the mobile phone, and turn on the message
reminder function in the APP. When the mobile phone receives messages, the
watch will vibrate to remind you and display the message content.
Call reminder
Keep the watch connected with the mobile phone, and the APP has been turned
on the call reminder function. When somebody is calling you, the watch will
vibrate and display the calling number. Click the Screen button to control the
phone to reject incoming calls.
Remote-control photography
If APP enters the camera function shakes the watch to control the mobile phone
to take photos, and the photos are saved in the mobile phone album.
Music Control
Keep the watch connected with the mobile phone, switch to the music control
function, and click the Screen button to control the music playing, pause,
previous, and next of the phone.
Alarm clock
Set the alarm time and repetition period on APP, and the watch will vibrate
regularly. (APP supports 20-times alarm clock setting )
Reminder
When the reminder function meets the set conditions or the watch power is less
than 10%, it will vibrate and display the following interface.
Menstrual Cycle
Female users are allowed to set the menstrual cycle info in the APP. The watch
will calculate and display the menstrual status of the current day if the
reminder function works. Such a function is not allowed if the APP personal
info is set to be “male”.
Weather
If the cellular network is one the mobile phone with the watch connected
normally, the watch will display the weather info of the current day.
Change the dial
- Long press the main screen in the dial interface to change the watch face.
- Go to App > Device > Dash Board; in the dashboard, you can choose and download the dial in the Dial center to the watch, or upload photos on your mobile phone to the dial interface.
Screen lights up
Turn on the function ‘Light up” on APP. When wearing a watch, turn the wrist
inward or raise your hand; the watch screen will light up automatically.
No Disturbance mode
Click the icon in the watch’s shortcut menu to tum on the no disturbance mode.
The watch will turn off the vibration reminder function.
Convenient function
The watch provides the following convenient functions:
Cleaning and
maintenance
- Don’t wear it too loose or tight, and make sure the watch doesn’t slide on the wrist. Long-time friction and pressure may cause skin uncomfortable, then please take off your watch and relax your wrist.
- The watch does not support snorkeling, hot shower, sauna, diving, high-speed water flow, or deep-water activities.
- Avoid the watch from being hit seriously or falling to the ground, and avoid the collision caused by sharp objects.
- Please keep watch and skin clean and dry. Try to avoid contact with sweat, soap, sunscreen, and other liquids.
- Do not constantly expose the watch to the sun or receive external heating such as a hairdryer.
| CPU | GR5515 | Memory configuration | 64M |
|---|---|---|---|
| Display screen | 1.47″ IPS Color screen | Sensor | Acceleration sensor +PPG |
heart rate sensor
Battery| 1 80mAh Polymer battery| Charging interface| 2PIN interface
Charging time| ≤2 hours| Charging input specification| 5V 1A
Endurance time| 3-5days| Physical keys| /
Bluetooth version| BLE 5.1| Compatible system| Android 5.0 and above; IOS 9.0
and above
Product weight| 28g(Contains strap)| Watch head size| 45.924.51 0.7mm
Waterproof grade| 3ATM| Accessories| Watch,Strap, magnetic charging wire,
manual
Watch case material| Fiber reinforced plastics| Strap Size| 1 8mm
https://www.vphband.com/hband/hband.html
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. RF Exposure Information The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
All trademarks are the sole property of their respective companies
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>