mti MBOFSX6636 Freestanding Soaking Tub User Guide
- June 13, 2024
- MTI
Table of Contents
mti MBOFSX6636 Freestanding Soaking Tub
Product Information
- Model: MBOFSX6636
- Dimensions: 66″ x 36″ x 21.75″
- Installation: Freestanding
- Material: Acrylic
- Weight : 130 lbs / 58.97 kg
- Maximum Fill : 71 gallons to overflow
- Features: 7″ wide flat deck surface on the drain side for mounting faucets
Product Usage Instructions
- Ensure the area where the freestanding tub will be placed is suitable and leveled.
- If ordering the Soaker version, place the tub in the desired location and make sure it is leveled using the pre-leveled foam base included in the package contents.
- If ordering the Soaker With Virtual Spout version, follow the same steps as above and also ensure that the Virtual Spout integrated high-flow tub filler is properly installed (see important ordering information).
- If desired, order any additional options or accessories such as color upgrades, drain & overflow kits, or pillows at the time of purchase.
- Fill the tub with water up to the desired level, keeping in mind that the maximum fill capacity is 71 gallons to overflow. Note that filling the tub to the maximum may require an above-average size or dedicated water heater.
- Enjoy your relaxing bath experience!
GENERAL SPECIFICATIONS:
- Installation: Freestanding
- Material: Acrylic
- Soaker Weight: 130 lbs / 58.97 kg
- Maximum Fill: 71 gal to overflow
NOTE: Filling this tub to the maximum may require an above-average size or dedicated water heater.
DIMENSION
IMPORTANT ORDERING & INSTALLATION INFORMATION
- This tub model includes an access panel as a standard feature for drain, optional Virtual Spout, and on select models, valve set installation.
- The access panel is visibly located behind the waste and overflow. Please consider access panel visibility before ordering and when planning the final installation position.
- Access panel dimensions vary according to tub model and design. Tubs featuring an integrated faucet deck for valve installation will have a larger opening and panel size for easier installation.
- Access panels can be eliminated by request at the time of ordering, which will increase installation difficulty.
- The Virtual Spout is installed below the water level of the tub. MTI supplies a Wilkins dual check valve and an Acme in-wall atmospheric vent to prevent back siphonage. However, some areas of the country require additional backflow prevention when water is introduced to the bath below the water level. Please check local codes.
- Options listed cannot be combined with Designer Collection options.
- Before discarding the tub crate, check for accessories that may be packaged inside.
- All product measurements are +1/2”.
- Specifications and configurations are subject to change without notice.
- Measurements herein supersede all others published prior to the publication date below.
PACKAGE CONTENTS
| PACKAGE | PACKAGE CONTENTS | PART # |
|---|---|---|
| Soaker | Soaking bath – No jets. Includes pre-leveled foam base. |
MBSOFSX6636
Soaker With Virtual Spout| Soaking bath – No jets. Includes
Virtual Spout integrated high-flow tub filler (see important ordering
information), pre-leveled foam base.| MBSOFSX6636VS
ACCESSORIES
Lift and Turn Drain & Overflow
Chrome (MBWOC) Brushed Nickel (MBWOBN) White (MBWOW)
Pillows
Soft Pillow
White (MBPSW) Black (MBPSB) Roll-Up Pillow
Light Aqua (MBPRUC) Black (MBRUB)
CSA # MTIS-OFSX6636
©2021 by MTI Baths, Inc. Modification Rights Reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>