VEVOR VV-CSM-500 700W Electronic Fireworks Machine Instruction Manual
- October 30, 2023
- VEVOR
Table of Contents
VEVOR VV-CSM-500 700W Electronic Fireworks Machine Instruction Manual
Thank you for choosing our electronic firework machine, our product requires the use of supplies and equipment provided by the company. If you do not use provided equipment and components, you may do damages to the machine. If these rules are not followed, the company will not be responsible for any damages and issues that may occur.
Operation Instructions
-
Plug in the power cord.
-
Remote Control Code Matching: To reboot the R001, pressthe MENU key on the display screen to match with page4. After the machine with the L code, press and hold the remote control
for 3 seconds to display a L–H code match. To repeat the code, long-press the remote key on the L–H page. -
Pour the material into the feeding hole. Don’t add too much or add into the wrong inlet.
-
Preheat the temperature and wait until the temperaturereaches 550 degrees. Press B/C/D on the remote control to start the jet.
-
The remote control and DMX can be configured together to connect to more than one sprayer for operation. The user will only need to set up a host by pressing the DOWN button when the machine displays Ln-H. When the remote control is not needed to control more than one machine, this machine should be canceled as the host, and then press the DOWN key until it displays L–Hon the screen.
Remote Control Instructions
A| Press A to turn on/off|
---|---|---
B| Click to start the spark, and click to stop the jet. 1st gear reaches 1-1.5
meters high.
C| Click to start the spark, and click to stop the jet. 2nd gear reaches 2-3
meters high.
D| Click to start the spark, and click to stop the jet. 3rd gear reaches 3-5
meters high
Parameters
| Spray Direction | Top Spray |
|---|---|
| Operating Temperature | -10℃-50℃ |
| Heating Temperature | 
Working Height| When the temperature reaches 550 degrees you can press the
B/C/D button to adjust the spark height as you want.
Power Supply| 110V/10A，220V/6A
Dimensions| 205 cm (L), 210 cm (W), 250cm (H)
Net Weight| 4.8 kg
Maximum Connection| Channel 6
Warranty| 1 Year
Consumables
| Net Weight | 200 g |
|---|---|
| Time | 8 to 10 minutes |
| Packing | Vacuum Packing |
Packing
| Material | Unit | Quantity |
|---|---|---|
| Power | Strip | １ |
| Signal Line | Strip | １ |
| Fuse | Piece | １ |
| Instruction Manual | Piece | １ |
| Instruction | Piece | １ |
| Carton | Set | 2 in 1 |
MAINTENANCE INSTRUCTIONS
Important Dust Cleaning Tips
-
Please thoroughly clean and spray the remaining debris inthemachine after each use, so that optimal performance canbemet.
Note: Remaining debris must not be left in the machine, problems may to the machine’s card. -
Remove the dust-proof net to clean up the dust.
-
If an open fire occurs, use sand to put out the fire, not water. 4. Keep the machine away from children.
After-sales Service
- One year warranty after use.
- If the product is mishandled, disassembled, or repaired froman uncertified repair location, the company will not be responsible for any faults, and warranty services will becomein valid.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>