FoodSaver VS3000 Series Premier Multi-Use Vacuum Cleaner User Guide
- October 30, 2023
- FoodSaver
Table of Contents
FoodSaver VS3000 Series Premier Multi-Use Vacuum Cleaner User Guide
MAKE A FOODSAVER® BAG
-
Turn Latch to Open position and open lid.
-
Place roll inside unit’s internal storage space as indicated. Pull enough bag material to edge until it is on top of the sealing strip to make the first seal and close lid.
-
Turn Latch to Operate position.
-
Press Seal Button to seal open end of bag. Wait until Seal Indicator Light turns off.
-
Turn Latch to Open position, open lid and pull enough bag material out to desired length for whatever you intend to vacuum seal and close lid.
-
Turn Latch to Operate position. Press Seal Button to make seal for next bag. While sealing, you can slide Bag Cutter across to remove bag.
VACUUM SEAL A FOODSAVER® BAG
- Turn Latch to Open position and open lid.
-
Place item(s) in bag, allowing at least 3 inches(7.62 cm) of space between contents and open end of bag. Place open end of bag into Vacuum Channel (Drip Tray) and close lid.
-
Turn Latch to Operate position.
-
Press Vacuum Button to begin vacuum and sealing process of open end of bag. Motor will continue to run until bag is fully vacuumed, then will automatically seal.
-
When Seal Indicator Light turns off, turn Latch to Open position and open lid. Remove bag. Refrigerate, freeze or store as needed.
VACUUM SEAL FOODSAVER® ZIPPER BAGS
-
Prepare zipper bags according to FoodSaver® Accessory Guidelines, which are included with accessory purchases. For zipper bags, makesure not to put any food under the valve and press zipper closed with finger while bag is lying down on a flat surface.
-
Turn Latch to Operate position and pull Built-in Handheld Sealer from appliance.
-
Place Built-in Handheld Sealer on zipper bag valve.
-
Press Mode Button (on select models) until the Indicator Light next to Dry is illuminated. Then press Handheld Button to vacuum.
Zipper bags are safe for pantry and fridge use only.
VACUUM SEAL FOODSAVER® CONTAINERS
(sold separately)
-
Prepare FoodSaver® Preserve & Marinate Container according to Guidelines, which areincluded with container purchase.
-
Turn Latch to Operate position and pull Built-in Handheld Sealer from appliance.
-
Place Built-in Handheld Sealer on container valve.
-
Press Mode button (on select models) until the Indicator Light next to Dry is illuminated. Then press Handheld Button to vacuum.
To release vacuum and open, turn knob on lid to Open.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>