SECU365 SS-1 Router User Guide
- June 3, 2024
- SECU365
Table of Contents
SS-1 Router
V1.1
User Guide
What’s Inside
SS-1 Device Wiring Connection
Reset
Reset | Holding for 5s until beeping sounds up | Reset all device settings |
---|---|---|
--- | --- |
Light Indication
Icon | Definition | Indication | LED Status |
---|---|---|---|
**** | Power | Solid light | Power On |
No light | Power Off | ||
Internet | Solid light | Connected to Internet | |
Blinking light | Connecting or Network issue | ||
No light | No Internet | ||
Error | Solid light | Please do the troubleshooting | |
No light | Working Normally |
Specifications
Technical Data
Max Users| 10,000
Max Video Clips| 6,000
Max Logs| 10,000
Max Fingerprint Templates| 3000
Working Range| Up to 30m (98.42ft)
Max devises Supported| 32 terminals
Operating Temp| -10-55°C (14-131°F)
Power| 12V/2A adapter
Hardware
Processor| 1.5G 4Core
Memory| 1GHz
Storage| 8GB
Network
Communication Method| Ethernet TCP/IP
Safari Requirement General| IE: 11 or newer / Chrome: 80 or newer
Dimensions| 22021895mm (8.66*8.589.742″)
Weight(with box)| 0.62kg (21.87oz)
Case| Plastic
APP Operating Requirement| Android: Android 5.0 or newer / 10S:10510 or newer
FCC warning statements
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 2 cm between the radiator & your body.
Tel: 1-866-866-8365
Support:www.secu365.com/support
Website:www.secu365.com
Need help?
To get help or learn more
https://www.secu365.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>