FoodSaver VS1100 Series Space Saving Food Vacuum Sealer User Guide

FoodSaver VS1100 Series Space Saving Food Vacuum Sealer

HOW TO

MAKE A FOODSAVER® BAG

1. Using scissors, cut enough bag material from roll to hold item, plus 3 inches (7.62 cm). Be sure to cut straight.
   

2. Slide Lock Latch to the Open position. Open appliance lid. Insert one end of bag material across Sealing Strip.

3. Close lid and slide Lock Latch to Operate position. Both indicator lights will turn on once the latch has been pushed all the way down.
   

4. Press Seal button.

5. When Seal Indicator Light stops flashing and becomes constant, sealing is complete. Slide latch to Open position, lift lid and remove bag.

VACUUM SEAL FOODSAVER® ZIPPER BAGS: (sold separately)

1. Prepare zipper bags according to FoodSaver® Accessory Guidelines, which are included with accessory purchases.
   For zipper bags, make sure not to put any food under the valve and press zipper closed with finger while bag is lying down on a flat surface.

2. Close lid and slide Lock Latch to Operate position.

3. Insert one end of Accessory Hose into Accessory Port on Appliance. Place Handheld Sealer on zipper bag valve.

4. Press Vacuum Button

Zipper Bags are safe for pantry and fridge use only.

VACUUM SEAL A FOODSAVER® BAG

1. Place item(s) in bag, allowing at least 3 inches (7.62 cm) of space between bag contents and top of bag.
   

2. Open appliance lid and place open end of bag into Vacuum Channel (Drip Tray).

3. Close lid and slide Lock Latch to Operate position.
   Both indicator lights will turn on once the latch has been pushed all the way down.
   

4. Press Vacuum button to begin vacuum and sealing process. Motor will continue to run until bag is fully vacuumed, then will automatically seal.

5. When Seal Indicator Light stops flashing and becomes constant, slide Latch to Open position and open lid. Remove bag. Refrigerate, freeze or store as needed.

VACUUM SEAL FOODSAVER® CONTAINERS: (sold separately)

1. Prepare FoodSaver®
   Preserve & Marinate Container according to Guidelines, which are included with container purchase.

2. Close lid and slide Lock Latch to Operate position.

3. Insert one end of Accessory Hose into Accessory Port on Appliance. Place Handheld Sealer on container valve.

4. Press Vacuum Button.

See Owner’s Manual for full instructions and safeguards.

PKG0001358407
VS1100_22EFSQSG1 (digital) QSG_GCDS-SL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>