UNYKA UK210551 Power Supply Unit User Manual

: September 11, 2024
: UNYKA

Table of Contents

UNYKA UK210551 Power Supply Unit
1. Warnings and safety instructions
2. Specifications
3. Installation Instructions
4. Connection of Internal Components
5. Warranty
6. Troubleshooting
MEANING OF THE DUSTBIN SYMBOL
Specifications
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

UNYKA UK210551 Power Supply Unit

USER MANUAL

P/N 52036

1. Warnings and safety instructions

1.1 Please read all sections of this user’s manual carefully before operation.
1.2 Do not open the top cover of the power supply. On-board electronic components generate dangerous high voltage which is hazardous for people. A power supply should be opened only by authorized expert.
1.3 Please open the PSU carefully. If the Seal of approval is damaged, the guarantee will be invalidated
1.4 Never handle the power supply with wet hands when in operation.
1.5 Never insert objects into the holes/fans of the power supply.
1.6 Note that this power supply is designed for use indoors. Use it outdoor can cause serious damages.
1.7 Do not handle the power supply while it is connected to a power socket.
1.8 Make sure your pc is not near a heater or other heat source, because this would reduce the life time of the power supply and may lead to failures.
1.9 Make sure that your computer case has adequate ventilation through additional fans, otherwise the power supply will evacuate the total heat produced in the pc case and this will also shorten the lifetime of the power supply.
1.10 If you want to clean your power supply, remove it completely from the mains and do not use wet rage or detergents. Clean the power supply only with dry cloth or vacuum cleaner.

2. Specifications

3. Installation Instructions

Please read “WARNINGS AND SAFETY INSTRUCTIONS” before operation

Please, place the Power supply following the next steps:

3.1 Insert the powers supply in the PC case using the screws.
3.2 Connect the 24 pins cable to the mainboard. For more details, please see the instructions of the mainboard. Make sure that you connect the 20 Pins cable combined with the 4 pins cable ( 24 pins).
3.3 If the mainboard only has 20 pin connector, please connect the 20 pins cable to the mainboard.
3.4 Connect the 4+4 pin (12v for CPU, NOT the 4 pins connector beside the 20 pins connector to the mainboard; some old mainboards don’t need this connector).
3.5 If your mainboard has two cpus installed, please connect another 4 pin connector to the mainboard.

Please check the mainboard manual for more information. Not all the mainboards provide 4+4 pin connectors for double CPUs.

4. Connection of Internal Components

4.1 Connect your internal components such as cd, dvd, hard disk, graphic card with corresponding cable.
4.2 Please refer to the instructions of those components before installation.
4.3 Before connect the power cord of the power supply, check those connected cables again to make sure that no error was made. Please make sure that the input voltage selected switch is on the correct position and corresponds to the input voltage (depend on model).

5. Warranty

UNYKACH guarantees this device to be free of defects in material and workmanship, and provides a 2-year hardware limited warranty for the power supply on the date of purchase. Please keep your receipt in a safe place.

This product is designed for computer usage only. Using this device in any other application will void the warranty. If you are not familiar with computer hardware installation, please ask for professional assistance.
The warranty is applying to damages caused through normal use and is void if it is determined that the device was damaged because of abuse, alteration, misuse, negligence, incorrect voltage supply, air/water pollution, accidents and natural disasters.

6. Troubleshooting

If your system does not turn on after installing the power supply, follow the troubleshooting guide as listed below:

1. 1. Please make sure the main power is connected on correctly.
2. 2. Please make sure that the 24Pin and 4+4 PIN connectors are connected correctly to the motherboard.

MEANING OF THE DUSTBIN SYMBOL

Protect our environment: do not dispose of electrical equipment in your domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal. These simple steps can help to avoid the potential effects that incorrect waste disposal can cause on the environment and human health. This will contribute to recycling and other forms of re-use of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authorities.

MADE IN CHINA
Imported by: COLORS Information Technology, SL.
C/ Morse, 49 – Pol. Ind. San Marcos · 28906 Getafe (Madrid) CIF: B-84045574 · www.colors-it.es

Specifications

Voltage: 220-240 VAC
Frequency: 50 Hz
Current: 6.3 A
+3.3 V: 13 A
+5 V: 14 A
+12 V: 40 A
-12 V: 0.5 A
Total Power: 550W MAX
+5 Vsb: 2 A
Connectors: 1x 24PIN, 1x 8 (6+2) PIN, 5x SATA, 1x FDD, 3x
MOLEX, 1x 4PIN, 1x 4+4PIN 12V