soundcore High Power Subwoofer Speaker User Manual
- June 7, 2024
- Soundcore
Table of Contents
soundcore High Power Subwoofer Speaker User Manual
At a Glance
Top Panel
(1)
- Press or press and hold for 2 seconds to power on.
- Press and hold for 2 seconds to power off.
(2)
- Press to turn on/off BassUp mode.
- Press and hold for 2 seconds to switch between indoor/outdoor sound mode.
(3)
- Press to turn on/off the light mode and switch the light modes.
- Press and hold for 2 seconds to turn off the light mode.
(4)
- Press and hold for 2 seconds to enter the PartyCast mode.
- In PartyCast mode, press to mutually switch the primary and secondary speakers.
- Press and hold for 2 seconds to exit the PartyCast mode.
(5)
- Press to enter Bluetooth pairing mode when powered on.
- Press and hold for 2 seconds to enter TWS pairing mode.
(6) (Multi-function button)
- Press to play/pause music.
- Press to answer or end a call.
- Press and hold for 2 seconds to reject an incoming call.
- Press to put the current call on hold and answer an incoming call.
- Press and hold for 2 seconds to switch between held call and active call.
(7)
- Press to decrease/increase volume.
- Press and hold for 2 seconds to continuously decrease/increase volume.
Connectors
(1) USB-C
• Connect to the power supply.
(2) USB (PowerIQ)
• Charge an external USB device.
• Connect to a USB storage device.
(3) AUX
• Connect to an external audio device through a 3.5mm AUX cable (not
provided).
Charging
Charging your Speaker
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
Checking Battery Level
Charging your USB Devices
Charge your USB devices through the USB connector.
Powering On/Off
Connect this speaker to an AC mains outlet by using the provided USB-C cable. The built-in battery can also be used as the power supply of this speaker.
- Unplug the power cable from the AC mains outlet when not in use for an extended period of time.
- This speaker will power off automatically 30 minutes after no audio input or
button inactivity.
Using your Soundcore Rave Neo
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- Dual Bluetooth Connection: This speaker can pair up to 2 mobile devices via Bluetooth. This speaker can only play music on one mobile device at a time. To play from another connected device, pause the currently active device first.
- To pair with another Bluetooth device, press the Bluetooth button to re-enter Bluetooth pairing mode.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device is available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
- You may also control music in the Soundcore App.
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers (A3395) can pair with each other for stereo sound.
- On both Soundcore speakers, press and hold the Bluetooth button for at least 2 seconds to enter TWS pairing mode.
- In TWS mode, connect either speaker with your Bluetooth-enabled device. The two speakers can play music on the left channel and right channel.
PartyCast Mode
Set up one Rave Neo as the primary speaker and connect it with more than 100+ secondary Rave Neo speakers to control audio and all the light modes.
- Connect one Rave Neo speaker to your Bluetooth device via Bluetooth.
- Press and hold the PartyCast button for 2 seconds on multiple Rave Neo speakers to enter PartyCast mode.
- When successfully connected, the PartyCast LED on the primary speakers will continue flashing white, while on the secondary speakers will turn white.
When PartyCast mode is successfully entered:
-
You can power off, adjust the volume, or switch light modes for all speakers by controlling the primary speaker only.
-
You can power off or switch light modes for each secondary speaker individually.
-
You can’t adjust the volume for each secondary speaker individually.
-
Any secondary speaker can be switched to become the primary speaker by
pressing the PartyCast button and connecting to your smartphone. Any primary speaker can be switched to become the secondary speaker by pressing the PartyCast button and searching for an available primary speaker. -
To exit the PartyCast mode, press and hold the PartyCast button on any speaker for 2 seconds.
AUX/USB Mode
Plugin a 3.5mm audio cable or insert a USB storage device, then open the Soundcore App to select AUX or USB mode.
- When using AUX mode, control audio playback via the connected device. EN 06
Button Controls
Switching Light Modes
- Download the Soundcore App to check all available light modes.
Soundcore App
Download the Soundcore App for an enhanced product experience.
- Set up Bluetooth connections
- Check product information
- Update firmware
- Indicate battery status
- Switch among multiple light modes (Default light mode is “Party”)
- Switch between indoor and outdoor sound modes
- Light DJ mode to support light and sound variation
- Enjoy party games
- Switch BassUp mode
- Remotely control the volume and play/pause
- Read user manual
- Store memory data
- Set Auto-power off time
Specifications
Specifications are subject to change without notice
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>