enbrighten 56064 Warm White LED Landscape Lights User Manual
- October 30, 2023
- enbrighten
Table of Contents
enbrighten 56064 Warm White LED Landscape Lights User Manual
Congratulations on your recent purchase of Enbrighten Landscape Lights. Enbrighten Landscape Lights are designed to provid e lighting for life with no bulbs to replace ever again!
IMPORTANT: Before installation, please read all warning statements included at the bottom of these instructions.
To ensure proper installation, please follow each step below:
Step 1 – INITIAL SETUP
- Carefully unpack your lights from the box. Remove and dispose of the wire ties and plastic bag (see warning on bottom).
- When installing landscape lights outside, a ground fault circuit interrupter (GFCI) receptacle must be used. Before installing, plug the landscape lights into the GFCI receptacle to ensure all lights work properly.
IMPORTANT: Unplug the landscape lights prior to installation.
Step 2 – INSTALLING LANDSCAPE LIGHTS
Each landscape light is designed with two universal keyholes for mounting the
included stakes (one per light) or for mounting on a flat surface (see below
instructions).
Ground Mounting
-
Carefully plan your installation by laying out your landscape lights in the desired sequence—starting with the GFCI receptacle and power supply. The first light can be within 10ft. of the power supply. Each subsequent light can be placed within 8ft. of each other.
-
Mount the power supply using either the keyholes onthe back or ear-tabs on the side (see Figure A).
Do not lay the power supply directly on the ground or where standing water may accumulate (see Figure B).
-
Ground mounting has two options for installation: placing the light directly on the ground or using the included mounting stake.
a) Placing on the ground: lay each light directly on flattened ground
such as garden bedding, walkways, etc.
b) Using the mounting stake: insert the stake into either keyhole slot on
the bottom of the puck and firmly plant it into soil or mulch (see Figure
C).
NOTE: If the stake requires more than a firm push, loosen the soil or
remove debris.
c) Cord-management: your Enbrighten landscape lights feature burialgrade
cable. This allows you to conceal excess cable by directly burying it in the
soil or covering it with garden bedding.
Flat-surface mounting
Lay out the landscape system in the manner in which you plan to install. Only
mount lights to a solid support structure, such as joist, beams, studs or
other solid mounting surfaces. Use two #6 pan head screws (not included) of an
appropriate length for the surface (See Figure D) to properly mount the
lights. Use the provided mounting template for guidance
Step 3 – ACTIVATING LANDSCAPE LIGHTS
To turn on or off, press button on power supply
Electrical ratings
Input: 120V, 50/60Hz
Model No | Input Watt Max | Location Use |
---|---|---|
WL?/52/6/18/2 | 26W | WET |
Important — please read:
Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and the product registration information.
WARNING: When using outdoor-use portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following:
Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet location portable luminaire. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety
WARNING: Keep these bags away from babies and children. Do not use in
cribs, beds, carriages, or playpens. The thin film may cling to nose and mouth
and prevent breathing.
Warranty Information: This Jasco product is warrantied for three (3)
years with a limited-lifetime replacement warranty on Enbrighten LED light
source only
MADE IN THAILAND
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City,
OK 73114. This Jasco product comes with a 3-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between
7AM-8PM, M-F, Central Time.
Patents pending | www.enbrightenme.com
56064 Version 2 02/22
WARNING
RISK OF ELECTRIC SHOCK
- RECEPTACLE OUTLETS USED FOR POWERING LANDSCAPE LIGHTS SHALL COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES. CONSULT LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE REQUIREMENTS.
- FOR USE ONLY ON GFCI PROTECTED CIRCUITS.
- DO NOT SUBMERSE.
- DO NOT USE AROUND AQUARIUMS.
- LANDSCAPE LIGHTS ARE A WET-LOCATION PRODUCT AND HAVE NO SERVICEABLE PARTS.
- DO NOT USE WITH EXTENSION CORD, NEAR WATER OR WHERE WATER MAY ACCUMULATE.
- KEEP LAMPS AT LEAST 16 FEET FROM POOLS AND SPAS.
- KEEP PLUGS AND RECEPTACLES DRY.
- AVOID DAMAGE TO THE CORDS AND LAMP ASSEMBLIES DURING INSTALLATION. PERIODICALLY INSPECT THE LANDSCAPE LIGHTS FOR PHYSICAL DAMAGE OR OTHER DAMAGE CAUSED BY OUTDOOR EXPOSURE TO THE ELEMENTS.
- REPLACE ANY DAMAGED LANDSCAPE LIGHTS.
- DO NOT INSTALL IN LOCATIONS WHERE LANDSCAPE LIGHTS CAN BE STEPPED ON.
- ENSURE LANDSCAPE LIGHTS ARE UNPLUGGED FROM POWER DURING INSTALLATION.
- CHILDREN SHOULD NOT PLAY WITH LANDSCAPE LIGHTS.
- UL RECOMMENDS TESTING GFCI CIRCUITS AND RECEPTACLES EVERY MONTH TO ENSURE PROPER OPERATION.
RISK OF FIRE
- LANDSCAPE LIGHTS ARE DESIGNED TO BE MOUNTED WITH THEIR INDIVIDUAL KEYHOLE MOUNTING FEATURE. DO NOT MOUNT LANDSCAPE LIGHTS USING THE MAIN ELECTRICAL CORD OR THE INDIVIDUAL DROP CORDS.
- NOT INTENDED FOR INSTALLATION IN CEILINGS, SOFFITS, CABINETS, ATTICS, OR OTHER ENCLOSED SPACES.
Mounting Template
Cut out mounting template and place template at your desired mounting location. Align line A parallel with edge of the mounting surface. Drill pilot holes on X locations and screw into the pilot holes. Place puck onto the keyholes, and twist to lock into place.
- Pilot hole drill size for #6 pan head wood screw, soft wood 3/32in., hard wood 9/64in.
We recommend the following models, available at select retailers or at www.enbrightenme.com
Company Products
my Touch Smart Outdoor/Indoor Plug-in Timer
Model #26898
Heavy-duty and weather-resistant with two grounded outlets. Fully customizable
time settings.
my Touch Smart In-Wall Digital Timer
Model #414311
Easy-to-program custom settings, presets and countdown options. ON/OFF switch opens to reveal program buttons.
my Touch Smart Sun smart™ In-Wall Digital Timer
Model #33861
Easy-to-program custom settings, presets and countdown options. Self-adjusts to sunset/sunrise times throughout the year. ON/OFF switch opens to reveal program buttons.
my Touch Smart Outdoor/Indoor Wi fi Smart Plug
Model #39845
Schedule and control outdoor lighting from any mobile or voice-controlled
device
For addtional stakes and accessories, visit
www.enbrightenme.com
or call 1-800-654-8483
Lengths and available
Multiple lengths and styles available now at www.enbrightenme.com
Black cord: | White cord: |
---|---|
31660 12ft. / 6 Bulbs | 35604 12ft. / 6 Bulbs |
33307 18ft. / 9 Bulbs | 36803 24ft. / 12 Bulbs |
31662 24ft. / 12 Bulbs | 35608 48ft. / 24 Bulbs |
31663 36ft. / 18 Bulbs |
31664 48ft. / 24 Bulbs
Black cord: | White cord: |
---|---|
35626 12ft. / 6 Bulbs | 35643 12ft. / 6 Bulbs |
35629 24ft. / 12 Bulbs | 35646 24ft. / 12 Bulbs |
35631 48ft. / 24 Bulbs | 35648 48ft. / 24 Bulbs |
Black cord: | White cord: |
---|---|
37791 24ft. / 12 Bulbs | 39511 24ft. / 12 Bulbs |
37790 48ft. / 24 Bulbs | 39092 48ft. / 24 Bulbs |
Read instructions or watch easy-to-follow video. Scan QR code or visit
https://byjasco.com/56064i
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>