enbrighten 37790 Outdoor String Lights Instruction Manual

: June 5, 2024
: enbrighten

Table of Contents

Step 1 – INITIAL SETUP
Step 2 – INSTALLING CAFE LIGHTS
Step 3 – INSTALLING MULTIPLE CAFE LIGHT SETS
Step 4 – REMOVING CAFE LIGHTS
Important – please read:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

enbrighten 37790 Outdoor String Lights

Congratulations on your recent purchase of Enbrlghten Cafe Lights. Enbrighten Cafe Lights are designed to provide lighting for life with no bulbs to replace ever again! Purchase additional lights to form one continuous string up to 750ft!
IMPORTANT: Before installation, please read all the warning statements included at the bottom of these instructions.
In order to ensure proper installation, please follow each step below:

Step 1 – INITIAL SETUP

Carefully unpack Cafe Lights from box. Remove the wire ties (see warning on reverse side).
When installing Cafe Lights outside, a Ground Fault Circuit Interrupter (GFCI) receptacle should be used. Before installing, plug the Cafe Lights into the GFCI receptacle to ensure all lights work properly. IMPORTANT: Unplug the Cafe Lights prior to mounting.

Step 2 – INSTALLING CAFE LIGHTS

IMPORTANT: Only mount Cafe Lights to a solid support structure such as joists, beams, studs or other solid mounting surfaces.
Each Cafe Light is designed with a universal keyhole for mounting with lights hanging downward. Hardware options include screws, nails, zip ties, hooks and more (not included).
Use keyhole ear tabs or keyholes to mount power supply.
Guide wires in compliance with local electrical and building codes may also be used to support Cafe Lights.
Once appropriate GFCI outlet location, mounting surface and hardware are determined, mount your Cafe Lights.
When finished mounting, place the female receptacle cover firmly over the unused outlet and plug the male plug into the GFCI receptacle.
Locate the remote. Remove the back cover of the remote and insert two AAA batteries (included) into the empty compartment. Be sure to note polarity. Do not mix old and new batteries. Firmly replace the back cover.
To power on your Cafe Lights, press the red ON/OFF button located at the top of the remote.
NOTE: Keep remote indoors when not being used. Remote is not waterproof.
Now that your lights are installed and powered on, take time to explore the following settings that are programmable via your remote:
Single Color Selection Feature
Find your favorite color on the remote’s color pad and simply push that button to set all of the lights the same color.
NOTE: Within this feature, you can also press the dimming button to adjust from 10 different light levels. The dimming option is only available for single- and dual-color selection.
Dual-Color Selection Feature
A – Press Color 1, then select a color from the color pad to set the color of every other bulb starting with the first bulb.
B – Press Color 2, then select a color from the color pad to set the color of every other bulb starting with the second bulb.
C – During the selection feature, press the dimming button to choose one of 10 different light levels.
Strobe Selection Feature
By pressing the Strobe button, the lights will strobe through all of the colors in a random pattern.
Fade Selection Feature
By pressing the Fade button, the lights will fade in and out through all of the colors in a random pattern.
Modes Selection Feature
Press the “modes” button repeatedly to cycle through the following preset modes:
• Twinkle • Multi Fade • Christmas • St. Patrick’s Day
• Red, white and blue • Fall • Spring • Multi
Timer Selection Feature
A – By pressing the 2 Hour Timer button, you will activate a two-hour countdown until lights turn off.
B – By pressing the 4 Hour Timer button, you will activate a four-hour countdown until lights turn off.
Once you have customized your settings and are ready to power off your lights, press the red ON/OFF button located at the top of the remote.
NOTE: Your Cafe Lights will automatically remember the last customized settings and will turn back on in the same mode and/or color scheme.

Step 3 – INSTALLING MULTIPLE CAFE LIGHT SETS

Extend the length of your lights by connecting more than one strand together to form one continuous string up to 750ft! Simply follow the above installation steps, making sure each connection between strands is secure and that the end female receptacle is securely covered using the receptacle cover

Available in multiple lengths at www.cafellghts.com

Length, feet	Bulbs	Model Number
24	12	37791
36	18	36632
48	24	37790

See below for electrical rating

Step 4 – REMOVING CAFE LIGHTS

Always unplug Cafe Lights from their receptacle prior to removing.
Carefully remove each light individually from the mounting hardware.
NOTE: For your safety, never pull or jerk lights from mounting hardware.
Store lights in a dry location.

SAVE THESE INSTRUCTIONS

Simplify your Cafe Light experience by automating your on and off times and add a decorative shade to give your lights a distinctive style.

We recommend the following models, available at your select retailers or at www.cafellghts.com:

myTouchSmart Outdoor
Timer (Plug-in) Model #26898

The myTouchSmart plug-in timer is the easiest to set timer on the market. Simply select your time and go.

|

myTouchSmart
Timer (In-Wall) Model #26893

The myTouchSmart In-Wall Timer provides easy-set controls if your receptacle is controlled by a switch.

|

GE Bluetooth Outdoor
Smart Switch (Plug-in) Model #13868

Wirelessly schedule and control outside lights or other devices from your smartphone or tablet

---|---|---

GE Bluetooth
Smart Switch (In-Wall) Model #13869

The GE Bluetooth In-Wall version provides the same Bluetooth control if your receptacle is controlled by a switch

|

Enbrighten cate Lens Shade
Stainless Steel Model #35917

Express your unique style with a variety of shapes and finishes of Enbrighten Cafe decorative shades

|

Enbrlghten care Lens Shade
Oil-Rubbed Bronze Model #35877

Express your unique style with a variety of shapes and finishes of Enbrighten Cafe decorative shades.

Important – please read:

Refer to the manual or visit www.byjasco.oom for limitations and restrictions on warranties and the product registration information

WARNING: When using outdoors use portable luminaires, basic safety precautions should always be followed to reduce the risk of tire, electrical shock, and personal injury, including the following·

a) Ground Fault Orcuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet location portable luminaire.
Receptacles are available having built-In GFCI protection and are oble to be used for this measure of safety.

b) Use only with an extension cord for outdoor use, such as an extension cord of cord type SEW. SEOW, SEOOW, SOW, SCOW, STW, STOW, STOOW. SJEW, SJEOW, SJEOOW, SJW, SJOW, SJOOW, SJTW, SJTOW, or SJTOOW.

WARNING: Keep these bags aw.iy from babies and children. Do not use in cribs, beds, carriages, or playpens. The thin film mey cling to nose and mouth and prevent breathing.

NOTE: Ensure the Cafi! Light’s receptacle cover Is firmly in,talled and well seated when not being used to connect additional strings.

Warranty information: This Jasco product is warrantied for three (3) years with a limited-lifetime replacement warranty on Enbrighten LED light source only.
This product is intended (and/or designed) for horizontal hanging, Vertical hanging of the product can void the product warranty.
This device complies with Part 15 of the FC.C and Industry Canada license- exempt RSS standard(s).
Operation is subject to the following two conditions: (1 this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These Iimits are designed to provide reasonable protection against harmful interference in a residential installation. This equipments generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radlo communications. However; there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna,
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*Requires 2AAA batteries.
Observe polarity markings(+),(-).
**

BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY AND PRODUCT DAMAGE
DO NOT MIX OLD AND NEW OTHER BATTERY TYPES.
REPLACE ALL BATTERIES AT THE SAME TIME.
REPLACE EXHAUSTED BATTERIE5 IMMEDIATELY.
REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR EXTENDED PERIODS OF TIME

RISK OF ELECTRIC SHOCK

RECEPTACLE OUTLETS USED FOR POWERING CAFE LIGHTS SHALL COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES. CONSULT LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE REQUIREMENTS.
FOR USE ONLY ON GFCI PROTECTED CIRCUITS.
DO NOT SUBMERSE.
DO NOT USE AROUND AQUARIUMS.
CAFE LIGHTS ARE A WET LOCATION PRODUCT AND HAVE NO SERVICEABLE PARTS.
DO NOT USE WITH EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE.
KEEP LAMPS AT LEAST 16 FEET FROM POOLS AND SPAS.
KEEP PLUGS AND RECEPTACLES DRY.
AVOID DAMAGE TO THE CORDS AND LAMP ASSEMBLIES DURING INSTALLATION. PERIODICALLY INSPECT THE CAFE LIGHTS FOR PHYSICAL DAMAGE
OR OTHER DAMAGE CAUSED BY OUTDOOR EXPOSURE TO THE ELEMENTS.
REPLACE ANY DAMAGED CAFE LIGHT STRINGS.
DO NOT INSTALL IN LOCATIONS WHERE CAFE LIGHTS CAN BE STEPPED ON.
ENSURE CAFE LIGHTS ARE UNPLUGGED FROM POWER DURING INSTALLATION.
CAFE LIGHTS SHOULD BE INSTALLED OUT OF THE REACH OF CHILDREN OR NOT ALLOWING CHILDREN TO PLAY WITH THEM.
UL RECOMMENDS TESTING GFCI CIRCUITS AND RECEPTACLES EVERY MONTH TO ENSURE PROPER OPERATION.
DO NOT OPERATE WITHOUT BULB SECURELY SCREWED IN.

RISK OF FIRE

CAFE LIGHTS ARE DESIGNED TO BE MOUNTED WITH THEIR INDIVIDUAL KEYHOLE MOUNTING FEATURE, DO NOT MOUNT CAFE LIGHTS BY USING THE MAIN ELECTRICAL CORD OR THE INDIVIDUAL DROP CORDS.
CAFE LIGHTS ARE DESIGNED TO BE LINKED BY USING THEIR ELECTRICAL PLUGS AND RECEPTACLES TO A MAXIMUM DISTANCE OF 750 FEET.
CAFE LIGHT INTERCONNECTING RECEPTACLES ARE INTENDED ONLY , FOR THE LINKING OF COMPATIBLI; CAFE LIGHT STRINGS. DO NOT USE CAFE LIGHT RECEPTACLES FOR ANY OTHER ELECTRICAL PURPOS~.
DO NOT MOUNT CAFE LIGHTS IN ANY POSITION WHERE THE BULB IS FACING UP.
DO NOT ALLOW THE LED LAMP ASSEMBLIES TO BE IN CONTACT WITH COMBUSTIBLE MATERIALS. LED LAMP ASSEMBLIES SHOULD HANG FREELY AND NOT BE SUSCEPTIBLE TO REPETITIVE DAMAGE CAUSED BY ENVIRONMENTAL CONDITIONS SUCH AS WIND, RAIN, AND ICE.
NOT INTENDED FOR INSTALLATION IN CEILINGS, SOFFITS, CABINETS, ATTICS, OR OTHER ENCLOSED SPACES.

MADE IN THAILAND
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 3-year limited warranty. Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7 AM – 8PM CST.
Pat.: US D837,420 and D783,186
www.cafelights.com

Model No.|

Input watt. Max.

|

Location Use

---|---|---
RGB *//6/*/***|

6W

|

Wet

RGB *//9/*/***|

9W

RGB *//12/*/***|

12W