IKEA RÖNNSKÄR Shelving Unit Instruction Manual
- June 12, 2024
- Ikea
Table of Contents
IKEA RÖNNSKÄR Shelving Unit
Product Information
The product is a piece of furniture that requires wall attachment to prevent tip-over accidents. It comes with wall attachment devices for securing it to the wall. The package does not include screws and plugs for the wall, so users need to provide their own suitable screws and plugs. If unsure about the appropriate screws and plugs to use, it is recommended to seek professional advice before installation.
Product Usage Instructions
- Before starting the installation process, ensure that you have the necessary screws and plugs suitable for your wall type.
- Position the furniture in the desired location against the wall.
- Locate the wall attachment points on the furniture. These are typically located at the back of the furniture.
- Hold the wall attachment device against the wall at the desired height and align it with the corresponding attachment point on the furniture.
- Mark the positions for screw holes on the wall using a pencil or marker
- Drill pilot holes at the marked positions on the wall.
- Insert the suitable screws and plugs into the pilot holes on the wall.
- Attach the wall attachment device to the wall by aligning it with the screws and gently tightening them
- Repeat steps 4-8 for all wall attachment points on the furniture.
- After securely attaching the furniture to the wall, ensure that it is stable and does not tip over easily.
Note : It is important to carefully read and follow each step of the instructions provided in the user manual to ensure proper installation and prevent accidents
WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To
prevent tip over this furniture must be used with the wall attachment
device(s) provided. Screw(s) and plug(s) for the wall are not included. Use
screw(s) and plug(s) suitable for your walls. If you are uncertain, seek
professional advice. Read and follow each step of the instruction carefully.