KNACRO KN1K Rotary Panel RF Remote Controller Owner’s Manual
- September 14, 2024
- KNACRO
Table of Contents
KNACRO KN1K Rotary Panel RF Remote Controller
Specifications
- Model No.: KN1K
- Dimension: 86.00mm x 23.00mm x 21.00mm
- Weight: 50.00g
- Supports: 1 Zone Dimming
- Power Source: CR2032 battery
- Working Voltage: 3VDC
- Working Current: 5mA
- Standby Current: 10A
- Standby Time: 1 year
- Remote Distance: 30m (Barrier-free space)
- Warranty: 3 years
- Operation Temperature: -30°C to +55°C
- IP Rating: IP20
FAQs
- Q: How do I know when the match between the remote control and receiver is successful?
- A: The LED indicator on the remote control will flash rapidly a few times to indicate a successful match.
- Q: What should I do if the remote control becomes unresponsive to the receiver?
- A: Re-match the remote control with the receiver following the provided instructions.
Features
- Apply to single-color LED controller.
- Rotate the knob to change brightness, support long press, or twice click operation.
- Each remote can match one or more receiver.
- CR2032 battery powered.
- Removeable and stick anywhere easily, or mount on wall use panel base.
Technical Parameters
Input and Output
Output signal| RF(2.4GHz)
Working voltage| 3VDC(CR2032)
Working current| ＜5mA
Standby current| ＜10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Warranty
Warranty| 3 years
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE, EMC, LVD, RED
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
IP rating| IP20
Mechanical Structures and Installations
Replace battery:
The typical base is as below:
Installation diagram
To fix the panel, two options are offered for selection:
- Option 1: fix it on the wall with two screws.
- Option 2: adhere it to the wall with paster.
Knob function
KN1K Single color dimming remote
- Push: Turn on or off the light.
- After turning on the light:
- Rotate: Rotate the knob to adjust brightness(2.5 turns, 50 levels).
- Long push(1-6s): Continuous 256 levels of brightness adjustment.
Match Remote Control (two match ways)
The end user can choose the suitable match/delete ways. Two options are offered for selection:
- Use the controller’s Match key
- Match: Short press the match key, and immediately push the knob. The LED indicator fast flashes a few times means the match is successful
- Delete: Press and hold the match key for 5s to delete all matches, The LED indicator fast flashes a few times means all matched remotes were deleted.
- Use Power Restart
- Match: Switch off the power, then switch on the power, and repeat. Immediately push the knob 3 times. The light blinks 3 times means the match is successful.
- Delete: Switch off the power, then switch on the power, and repeat. Immediately push the knob 5 times. The light blinks 5 times means all matched remotes were deleted.
Safety Information
- Read all instructions carefully before you begin this installation.
- When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
- If no response from the receiver, please re-match the remote.
- Gently handle remote, beware of falling.
- For indoor and dry location use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>