enbrighten 56055-S1 Mini White Only LED Landscape Lights Instruction Manual

: October 30, 2023
: enbrighten

Table of Contents

enbrighten 56055-S1 Mini White Only LED Landscape Lights
Product Usage Instructions
Ground Installation
Best Practices for Installation
Important — please read
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

enbrighten 56055-S1 Mini White Only LED Landscape Lights

enbrighten-56055-S1-Mini-White-Only-LED-Landscape-Lights-
product

The Enbrighten Mini Landscape Lights are designed to provide lighting for life. The product comes with stakes for ground installation and can also be used on a flat surface. The lights feature a burial-grade cable that allows you to conceal excess cable by directly burying it in the soil or covering it with garden bedding. The product has an input rating of 120V, 50/60Hz, and a maximum input watt of 13W. It also requires a ground-fault circuit interrupter (GFCI) receptacle for outdoor installation.

Product Usage Instructions

Step 1 – Initial Setup

Carefully unpack the lights from the box. Remove and dispose of the wire ties and plastic bag.
Plug the landscape lights into the GFCI receptacle before installation to ensure all lights work properly.
Unplug the landscape lights prior to installation.

Step 2 – Installing Landscape Lights

Note: Before installing, carefully read all the warning statements included at the bottom of the instructions.

Ground Installation

Lay out your landscape lights in the desired sequence, starting with the GFCI receptacle and power supply. The first light can be within 10ft. of the power supply. Each subsequent light can be placed within 3ft. of each other.
Mount the power supply using either the keyholes on the back or ear tabs on the side. Do not lay the power supply directly on the ground or where standing water may accumulate.
Place the light directly on the ground or garden bedding. Or, using the mounting stake, insert the stake into either keyhole slot on the bottom of the puck and firmly plant it into soil or mulch. If the stake requires more than a firm push, loosen the soil or remove debris.

Flat-Surface Mounting:

Lay out the landscape system in the manner in which you plan to mount it.
Mount lights to a solid support structure, such as joists, beams, studs, or other sturdy mounting surfaces. Use one #6 Panhead screw (not included) of an appropriate length for the mounting surface to properly install the lights.

Note: Do not pull the cord tight, leave slack in the loop to prevent strain on the power supply.

Step 3 – Activating Landscape Lights

To turn on or off, press the button on the power supply.
Note: Please refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and product registration information.

Warnings:

When using outdoor portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury.
Ground-fault circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet-location portable luminaire. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
Keep plastic bags away from babies and children. Do not use it in cribs, beds, carriages, or playpens. The thin film may cling to the nose and mouth.

Best Practices for Installation

Install power supply/receiver a minimum of 18in. above the ground to ensure optimal range on the remote control.
Note that placing the power supply/receiver directly on the ground can severely diminish the remote control range.
Do not mount the power supply/receiver behind large objects such as posts, walls, large boulders, or other items which may interfere with the signal from the remote control. Also, avoid mounting the power supply/receiver on or near metal walls or other large metal objects. Doing so can reduce the remote control’s operation distance.
Do not pull cords tight as it may damage electrical connections. Leave a small amount of slack on cords to remove strain on connections.
The longest remote control operating distances are obtained when the power supply/receiver is in line of sight of the remote control. Operating the remote control inside of houses and other buildings will reduce the remote control’s operation distance.

Congratulations on your Enbrighten Mini Landscape Lights—designed to provide lighting for life!
IMPORTANT: Before installation, please read all the warning statements included at the bottom of these instructions.
To ensure proper installation, please follow each step below.

Step 1 – INITIAL SETUP

Carefully unpack your lights from the box. Remove and dispose of the wire ties and plastic bag (see a warning on the bottom).
When installing landscape lights outside, a ground-fault circuit interrupter (GFCI) receptacle must be used. Before installing, plug the landscape lights into the GFCI receptacle to ensure all lights work properly.

IMPORTANT: Unplug the landscape lights prior to installation.

Step 2 – INSTALLING LANDSCAPE LIGHTS
Each landscape light is designed for mounting with the included stakes (one per light) or for use on a flat surface (see below instructions).

Ground Installation

Carefully plan your installation by laying out your landscape lights in the desired sequence—starting with the GFCI receptacle and power supply. The first light can be within 10ft. of the power supply. Each subsequent light can be placed within 3ft. of each other.
Mount the power supply using either the keyholes on the back or ear tabs on the side (see Figure A). Do not lay the power supply directly on the ground or where standing water may accumulate (see Figure B).

Ground Mounting

a) Place light directly on ground or garden bedding.
b) Using the mounting stake: insert the stake into either keyhole slot on the bottom of the puck and firmly plant it into soil or mulch. NOTE: If the stake requires more than a firm push, loosen the soil or remove debris.

Cord Management
Your Enbrighten Mini Landscape Lights feature burial-grade cable. This allows you to conceal excess cable by directly burying it in the soil or covering it with garden bedding.
Flat-Surface Mounting
Lay out the landscape system in the manner in which you plan to mount it. Only mount lights to a solid support structure, such as joists, beams, studs, or other sturdy mounting surfaces. Use one #6 pan head screw (not included) of an appropriate length for the mounting surface to properly install the lights.
Step 3 – ACTIVATING LANDSCAPE LIGHTS
To turn on or off, press the button on the power supply.
Electrical ratings Input: 120V, 50/60Hz

Input Watt, Max.

ENBW/2/54/15/22/2| 13W| WET

Important — please read

Refer to the manual or visit www.byjasco.com for limitations and restrictions on warranties and the product registration information.
WARNING: When using outdoor as portable luminaires, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and personal injury, including the following: Ground-fault circuit Interrupter (GFCI) protection is to be provided on the circuit(s) or outlet(s) to be used for the wet-location portable luminaire. Receptacles are available having built-in GFCI protection and are able to be used for this measure of safety.
WARNING: Keep these bags away from babies and children. Do not use in cribs, beds, carriages, or playpens. The thin film may cling to the nose and mouth and prevent breathing.
WARRANTY INFORMATION: This Jasco product is warrantied for three (3) years with a limited-lifetime replacement warranty on the Enbrighten LED light source only.

WARNING

RISK OF ELECTRIC SHOCK

OUTLETS USED FOR POWERING LANDSCAPE LIGHTS SHALL COMPLY WITH ALL NATIONAL AND LOCAL ELECTRICAL CODES. CONSULT LOCAL ELECTRICIAN IF UNSURE OF COMPLIANCE REQUIREMENTS.
FOR USE ONLY ON GFCI-PROTECTED CIRCUITS.
DO NOT SUBMERSE.
DO NOT USE AROUND AQUARIUMS.
LANDSCAPE LIGHTS ARE A WET-LOCATION PRODUCT AND HAVE NO SERVICEABLE PARTS.
DO NOT USE WITH EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE.
KEEP LAMPS AT LEAST 16 FEET FROM POOLS AND SPAS.
KEEP PLUGS AND RECEPTACLES DRY.
AVOID DAMAGE TO THE CORDS AND LAMP ASSEMBLIES DURING INSTALLATION. PERIODICALLY INSPECT THE LANDSCAPE LIGHTS FOR PHYSICAL DAMAGE OR OTHER DAMAGE CAUSED BY OUTDOOR EXPOSURE TO THE ELEMENTS.
REPLACE ANY DAMAGED LANDSCAPE LIGHTS.
DO NOT INSTALL IN LOCATIONS WHERE LANDSCAPE LIGHTS CAN BE STEPPED ON.
ENSURE LANDSCAPE LIGHTS ARE UNPLUGGED FROM POWER DURING INSTALLATION.
CHILDREN SHOULD NOT BE ALLOWED TO PLAY WITH LANDSCAPE LIGHTS.
UL RECOMMENDS TESTING GFCI CIRCUITS AND RECEPTACLES EVERY MONTH TO ENSURE PROPER OPERATION. RISK OF FIRE
LANDSCAPE LIGHTS ARE DESIGNED TO BE MOUNTED WITH THEIR INDIVIDUAL KEYHOLE MOUNTING FEATURE, DO NOT MOUNT LANDSCAPE LIGHTS BY USING THE MAIN ELECTRICAL CORD OR THE INDIVIDUAL DROP CORDS.
NOT INTENDED FOR INSTALLATION IN CEILINGS, SOFFITS, CABINETS, ATTICS, OR OTHER ENCLOSED SPACES.