HBN Smart Garage Door Opener User Manual
- June 7, 2024
- HBN
Table of Contents
HBN Smart Garage Door Opener User Manual
Main Parts & Accessories
-
1X HBN smart garage door opener switch
-
Long Short
4 X screws+4 X screws -
1 X sensors
-
10 X double-sided adhesive tapes
-
4 X screw nuts
-
4 X cable hooks
How to install the sensors
Find a proper place on the garage door to mount the sensors. Please make sure
that the distance between the two sensors are less than I inch (2.5cm) when
garage door is closed and two sensors are well separated when the garage door
is open.
You can use the 3M sticker or screws to fix the sensors. Before fixing the
sensors. Make sure the sensors work well and that the fixing point is in the
right place.
How to wire
The HBN smart garage door opener is the companion device of the existing garage door opener. Its main working principle is as follow:
You can choose either of the below methods to install the smart garage door opener.
Install with GARAGE DOOR OPENER motor controller directly
-
Find a proper place on the garage wall and use 3M sticker or screws to fix the smart garage door opener.
-
Open the existing GARAGE DOOR OPENER power box, connect the signal control cable of the smart garage door opener to the terminals connecting to the wall button. (no wire order required)
-
Restore the existing opener power box.
Parallelly install HBN smart garage door opener to the existing wall
button
You can also choose to install the HBN smart garage door opener parallelly to an existing wall button following below steps:
-
Find a proper place on the garage wall to fix the smart garage door opener.
-
Open the existing wall button, connect the signal control cable of the smart garage door opener to the two wall button terminals. (no wire order required)
-
Restore the button switch.
Control the opener from your smartphone
-
Download the “HBN-LINK” app from App store or Google Play.
App Store
Google Play Store -
Power ON the smart garage door opener.
-
Launch “HBN-LINK” app and sign in with your account.
-
Press and hold the push button on the smart garage door opener for about 5 seconds and then release, the indicator will blink quickly.
-
Add the device in the app: You can manually select the device or have the app search it.
-
To add the device manually, find the “Wi-Fi smart garage door opener” in category “Electric” and follow the instructions. You can add the device in regular mode or in AP mode.
After completing all above steps, power on the existing garage door opener system. Then you can use HBN Smart Garage Door Opener to control and monitor your garage door anywhere from your smartphone.
Main Features
- Door open notification
- Time-out notification
- Door closing reminder
- Countdown close/open
- Open/close log
- Timed open/close
- Works with Alexa
- Works with Google Assistant
FAQ
Any questions about Smart Garage Door Opener please feel free to contact sales@chinatimer.com
- Can I manage multiple smart garage door openers with one APP? One smart garage door opener controls one garage door only, but you can manage multiple smart garage door opener from one app.
- What shall I do when my app is unable to control the existing smart garage door opener?
Please try below measures:
- Check that the Wi-Fi and router are working well with access to the internet.
- Check that the access password of the Wi-Fi network is correct.
- Reset the device start over.
Contact Us
CENTURY PRODUCTS INC.
3545 Granada Ave El Monte CA 91731
Custom Service Assistance: 1.909.592.1881
Email: support@bn-link.com
Web: www.bn-link.com
Hours: 9AM – 5PM PST, Mon – Fri
Designed in California, Made in China