GIMA 23456 Mobile Stand User Manual
- June 9, 2024
- GIMA
Table of Contents
GIMA 23456 Mobile Stand User Manual
Installation Hardware
x 1 The Pole
x 1 Tray
x 5 Castors
x1 The Base
x1 Folding Rod
Spare Parts Box
x 6 Screw (M3 10)
x 6 Screw Shim
x 1 Screw (M3 10)
x 1Screw (MB)
x 1 Holder
x 1 Tray Base
5mm 4mm 3mm Hex Key
This product contains small parts, keep these away from children.
Type A
Type B
STEP.1: INSTALL STAND BASE / POLE
Insert five castors into the hole of base forcibly to make it stable.
Insert the pole into the base and fasten the screw(M8) with wrench from the
bottom of base.
Loose the knob, pull out inner pole at suitable height and then tighten knob, make sure knob is tightened.
STEP.2: INSTALL TRAY
This is the optional step accroding to customer’s needs. The tray can hold the
tools of nurse for puncture.
Connect tray base and tray with screw(M3*10) and screw shim.
Install the tray from the top of the pole, adjust it to the appropriate position, and tighten knob A
STEP.3: INSTALL HOSE / HOLDER
Put the knob at the pole, then fully tighten the knob.
Connecting Holder’s cross to adaptor. screw it.
Product Function
TENSION ADJUSTMENT
Adjust the tension of the equipment through wrench.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>