HI-FOCUS HF-SEH04-60W Network Switch Instructions
- October 30, 2023
- HI-FOCUS
Table of Contents
HI-FOCUS HF-SEH04-60W Network Switch
Product Information
The HF-SEH04-60W is a network switch that supports Power over Ethernet (PoE) devices such as wireless access points and IP cameras. It supports the IEEE802.3af/at standard and has a transmission distance of up to 250m, making it flexible for installation in wireless AP and surveillance projects. The switch also features upward port auto MDI/MDIX, storage forward switch system, and smart power and minimum consumption to guarantee PD requirement. It has a power supply circuit protection function and protection back-end device safety, and can automatically provide adaptive device fanless design to save energy and protect the environment. The switch is compact in size, supports IEEE802.1 Q VLAN and 4K VLANs, loop circuit detection, and saving power function when port connection.
Product Usage Instructions
To use the HF-SEH04-60W network switch, connect it to your PoE devices such as wireless access points and IP cameras using Ethernet cables. The switch supports the IEEE802.3af/at standard, so make sure your devices are compatible with this standard. The switch also supports upward port auto MDI/MDIX, so you don’t need to worry about crossover cables.
The switch is compact in size, so you can place it on a desk or mount it on a wall or ceiling using the included mounting brackets. Make sure the switch is placed in a well-ventilated area to prevent overheating.
The switch features LEDs indicators for power, network activity, and PoE status. Use these indicators to troubleshoot any issues with your network or PoE devices.
The switch supports IEEE802.1 Q VLAN and 4K VLANs, so you can segment your network into different virtual LANs for better security and management. The switch also supports loop circuit detection and saving power function when port connection to save energy.
The switch has an operating temperature of -10°C to 50°C and a storage temperature of -40°C to 70°C. It has a working humidity of 10% to 90% non- condensing and a storage humidity of 5% to 90% non-condensing. The switch has a dimension of 92mm x 82mm x 22mm and weighs 0.7kg.
Product Features
- Support Power over Ethernet cable device for example wireless AP and IP camera.
- Support IEEE802.3af/at standard .
- Transmission distance 250m, it can be flexible installation for wireless AP and surveillance project.
- Support upward port auto MDI/MDIX.
- Adopted storage forward switch system.
- Smart Power and minimum consumption, guarantee PD requirement.
- Provided with power supply circuit protection function and protection back-end device safety
- Automatically provide the adaptive device
- Fanless design realize saving energy and environment protection
- No noise design can reduce the affect for environment
- Compact size design
- Support IEEE802.1 Q VLAN and 4K VLANs
- Support loop circuit detection
- Support saving power function when port unconnection
Specifications
- Network Port
- 4 10/100Mbps PoE RJ45 port(port 1~port 4)
- 1 10/100Mbps Non-POE RJ45 port(port 5)
- Transfer Rate
- 100Mbps full Duplex,10 or 100Mbps Half Duplex N
- etwork interface:10BASE-T or 100BASE-TX
- Ethernet RJ-45 port
- Performance
- Bandwidth:1.0Gbps (no block)
- Network delay(100 to 100Mbps): Maximum 20 μs(using 64 byte packet)
- MAC address capacity:1K
- Frames filter and transfer rate： 10M port maximum 14,800pps 100M port maximum 148,800pps
- Network protocol and standard
- IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.3af/at Power over Ethernet
- Power pin 1/2(+),3/6(-)
- LEDs indicator Power LINK/ACT,PoE
- Power Total power:60W(PoE Port:1～4) (Each country use customized power plug)
ENVIRONMENTAL CHARACTERISTICS
- Operating Temperature 0°~45°C（32°~113°F）
- Storage Temperature -20℃~90℃（-4°~194°F）
- Working Humidity10%~90% (Non-condensing)
- Storage Temperature 5%~90% (Non-condensing)
PHYSICAL CHARACTERISTICS
- Dimensions 92mm x 82mm x 22mm
- Weight 0.7kg