Hi-Focus HF W131 Wireless Adaptor Owner’s Manual
- June 10, 2024
- HI-FOCUS
Table of Contents
Hi-Focus HF W131 Wireless Adaptor
For making the DVR online through Wi-Fi option you need supported Wireless adapters. In Velocity Series DVR below models are supported.
Supported Wireless adapters
- HF W131. (Hifocus)
- Tenda U3.
(If Wi-Fi option not available in the DVR then contact support to upgrade the firmware. After upgrading you will get a Wi-Fi option.)
After connecting Wi-Fi adapter
- Go to Settings >> Network >> TCP/IP >> Wi-Fi
- Enable the Wi-Fi option
- Click on Refresh.
(Then it will show your available Wi-Fi SSID, Select your Wi-Fi and enter the Wi-Fi password. If you give correct details then IP address, gateway and subnet mask will be generated.
- Go to NAT.
- Enable NAT & Save.
(Refer below pic)
- If the Nat Status is Successful then your DVR is in online
- If failed need to check your internet
Note: Wi-Fi option not supported in NVR.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>