AGT INDUSTRIAL AGT-SSECAG-Y Hydraulic Skid Steer Auger with 3 Drill Owner’s Manual
- October 30, 2023
- AGT INDUSTRIAL
Table of Contents
AGT INDUSTRIAL AGT-SSECAG-Y Hydraulic Skid Steer Auger with 3 Drill
TO THE OWNERS
GENERAL COMMENTS
Congratulations for having this Hydraulic Skid Steer Auger! Your HydraulicSkid Steer Auger was carefully designed and manufactured to give youyearsof dependable service. Your Hydraulic Skid Steer Auger will requiresomeminor maintenance to keep it in top working condition. Please observe all safety precautions and maintenance proceduresasdescribed in thismanual.
BEFORE OPERATION
Thoroughly read and understand the instructions given in this manual beforeoperation. Refer to the “Safety Label” section, read all instructions notedonthem.
Do not allow anyone to operate his equipment who has not fully readandcomprehended this manual and who has not been properly trainedinthesafe operation of the equipment.
SERVICE
Please remember to use only manufacturer replacement parts. Substituteparts may not meet the standards required for safe, dependable operation.
SAFETY PRECAUTIONS
BEFORE OPERATION
- The operator must read the operation manual carefully beforeinstallation, operation or maintenance. Improper operation will causethemachine damage or the operator death.
- Read all the safe signs and safe declarations. Follow all the professional safe terms, local laws or the professional directions.
- Familiar with the Hydraulic Skid Steer Auger about functions, specs andoperation. Replace the to-be-damaged parts in time. Make sureall thehydraulic installations and couplings connect firmly, and all the safesignsstick on the suitable positions clearly
IMPORTANT
- Operator should be familiar with all functions of the unit.
- Make sure all guards and shields are in place and secured beforeoperatingimplement.
- Keep all persons away from equipment and work area.
- Dismounting from a moving unit can cause serious injury or death.
- Keep hands, feet, and clothing away from power-driven parts.
- Detach and store implement in an area where children normally donot play.
Secure implement by using blocks and supports.
Always wear proper safety glasses, goggles, or a face shield whendriving pins in or out, or when any operation causes dust, flyingdebris, or any other hazardous material.
SAFETY PRECAUTIONS
Operator Safety
- Wear protective clothing and equipment appropriate for the job. Clothingshould be snug fitting without fringes and pull strings to avoid entanglementwith moving parts.
- Prolonged exposure to loud noise can cause hearing impairment orhearing loss. Wear suitable hearing protection such as earmuffs or earplugs.
- Operating equipment safely requires the operators all attention, Avoidwearing radio headphones while operating machinery
Tool Safety
- Inspect entire machine before each use. Replace damaged or wornparts.
- Check for fuel leaks and make sure all fasteners are in place andsecurelyfastened.
Wear Protective Equipment
- Escaping fluid under pressure can penetrate the skin causing serious injury.
- Avoid the hazard by relieving pressure before disconnecting hydrauliclinesor performing work on the system.
- Make sure all hydraulic fluid connections are tight and all hydraulic hosesand lines are in good condition before applying pressure to the system.
- Use a piece of paper or cardboard, NOT BODY PARTS to checkforsuspected leaks.
- Wear protective gloves and safety glasses or goggles when workingwithhydraulic systems.
- DO NOT DELAY. If an accident occurs, see a doctor familiar with this typeofinjury immediately. Any fluid injected into the skin or eyes must betreatedwithin a few hours or gangrene may result.
Transportation and Storing
- Store machine and fuel where fuel vapors cannot reach sour combustionlike, water heaters, electric motors, switches, furnaces, etc.
- Always secure the machine with tie downs or similar restraints whentransporting.
- The machine be stored in a manner that prevents it fromfalling, rollingortipping.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>