AGT Industrial AGT-SSDFM60 Skid Steer Forestry Disc Mulcher Owner’s Manual

AGT Industrial AGT-SSDFM60 Skid Steer Forestry Disc Mulcher Owner’s Manual

**WARNING

**

• Please read the product manual completely before assembly
• Check against the parts list to make sure all parts are received
• Wear proper safety goggles or other protective gears while in assembly

Product introduction

1.  Argot disc mulcher withstand the toughest conditions with many type of land reclamation, this powerful machine regains disc speed quickly
2. Argot disc mulcher SSDM: The machined steel disc has quad teeth on the top, sides, and bottom, it can maximize their productivity and reduce downtime and maintenance costs. 3.In addition, you will benefit from low operating costs by consuming less fuel compared to other larger attachments
3. Coupler between the hydraulic motor and bearing box to protect from damage.
4. Durability: Tough, rough and built to last.

Operator

Congratulations on owning this Skid Steer Forestry Disc Mulcher! Your Skid Steer Forestry Disc Mulcher are carefully designed and manufactured to provide you with years of reliable service.

Your Skid Steer Forestry Disc Mulcher will need some minor maintenance to keep it in excellent working condition. Please follow all safety precautions and maintenance procedures described in this manual. Please read and understand the instructions in this manual carefully before operation.

Please refer to the “Safety Labels” section for all instructions noted above. No one is allowed to operate his equipment who has not fully read and understood this manual and has not been trained in safe deposit box operations. Remember to use only parts replaced by the manufacturer.

Replacement parts may not meet the standards required for safe and reliable operation.

Safety precautions

BEFORE OPERATION

1. The operator must read the operation manual carefully before installation, operational
   maintenance. Improper operation will cause the machine damaged or the operator dead.

2. Read all the safe signs and safe declarations. Obey all the professional safe terms, local
   laws or the professional directions.

3. Familiar with the duty Skid Steer Forestry Disc Mulcher about functions, specs and operation. Replace the to-be-damaged parts in time. Make sure all the hydraulic installation sand couplings connect firmly, and all the safe signs stick on the suitable positions clearly.

ALWAYS watch for overhead power lines. NEVER operate a mechanical device when a bystander is within 300 feet of your work area. Flying debris can cause serious injury or even death.

• NEVER position your body or limbs under an unsupported cutter deck.

• DO NOT allow this machine to contact buildings, utilities, large rocks or tree stumps or you may lose control of the skid steer loader.

• NEVER use drugs or alcoholic beverages while operating or servicing this machine.

• ALWAYS operate this attachment during daylight or well-lit areas.

• To prevent the skid steer loader and implement from rolling forward, stop the bengine andset the parking brake when exiting the skid steer loader.

• Inspect implement for missing hardware prior to using this machine.

• DO NOT allow children to play on or around this equipment at any time. Store this
  implement in an area not frequented by children.

• ALWAYS wear the proper personal protection equipment while operating or servicing
  this machine. NEVER operate or service this machine with bare feet, sandals, or other
  light footwear.

• ALWAYS wear work gloves when handling cutter blades as they are often very sharp.

• ALWAYS use eye protection while operating or servicing this machine.

• DO NOT speed! Keep your driving speed between 2 and 5 mph.

****Wear appropriate safety glasses, goggles or face masks Control Forestry Disc Mulcher work, or any operation caused by dust, flying Debris, or any other hazardous material.

Technical parameters

Work environment：

• Temperature: – 20 ~ 50 ℃
• Height: 100 meters or less
• Relative humidity :≤85%
  

Installation

Unpack and check
Check for missing or damaged components according to the packing list. If you have any questions, please contact the supplier. List of details As the table above:
Machine installation
Equipment must be installed on a solid concrete floor or similar. If the ground is not firm, it will not be able to connect to the loader. There should be a space around the device for easy operation.
Connecting Forestry Disc Mulcher
Consult your skid steer operator’s manual for specific instructions on how to connect your Forestry Disc Mulcher to your skid steer loader.

General Attachment Method

1. Make sure the hydraulic lines are clear from the front side of the brush cutter’s attachment plate and that the locking pins on the skid steer mounting plate are retracted. 2. Drive forward and place top of skid steer mounting plate under the attachment mountingflange. See Figure below.
2.  Slowly raise and tilt back the skid steer mounting plate untilthe brush cutter attachment plate rests flat against the skid steer mounting plate.
3. Activate your skid steer’s lever lock switch to engage and lock the pins into the flange slots of the brush cutter’s attachment plate. If your skid steer does not have this switch, push the latch handles down until you can see the lock pins extend into the attachment flange.
4. Connect the attachment hydraulic hoses and the case drain hose (SBCNS model only) to the auxiliary supply couplers located on your skid steer loader lift arm
   

Skid Steer Mounting Plate to Attachment Mounting Flange

Note: this drawing does not represent the appearance of theequipment
For actual purchase, this figure is only for installation locationre ference.

Oil pipe connection: Skid Steer Articulating Brush Cutter is equipped with 3 oil pipes, whichare return oil pipe, inlet oil pipe and outlet oil pipe. Connect the tubing to the loader tubing connection.

Handling safety

Maintenance Overview

The maintenance procedures described in this manual should only be carried out by qualified mechanics who have been trained to repair this machine. Some procedures require special tools and skills to complete. DO NOT attempt to repair or perform service work on this machine unless you have the skills and tools to do so. Contact your local dealer for maintenance and repair services

NOTICE

Improper maintenance or modifications to the design or performance of this machine will void the warranty. ONLY use genuine AGT equipment manufacturing replacement parts on this machine.

Safety Instructions

• Obey the following safety instructions when servicing or repairing this machine.

• ear proper Personal Protective Equipment (PPE) while working on this machine, which may include safety glasses, hard hats, steel toe boots, gloves, etc.

• Wear a welding helmet when welding to protect your eyes, face and neck from lash burn, ultra-violet radiation and heat.

• Ensure all jack stands, lifts and hoists are in good working condition and have the rated load capacity to support the load.

• If servicing is performed while the Forestry Disc Mulcher is attached to the skid steer, turn engine off, set parking brake and chock wheels to prevent skid steer from moving.

• Only perform service work in a well-lit area.

• Allow the machine to cool down before servicing this machine. Hot oils can burn your
  skin.

• NEVER work under an unsupported cutter deck.

Storage Tips

To get years of quality use out of your Forestry Disc Mulcher, follow these storage tips:

Ensure Forestry Disc Mulcher is free of debris, dirt, grime and grease.

Store your Forestry Disc Mulcher in a dry shed or garage.

When storing your Forestry Disc Mulcher for the season,

cover with a weather proof tarp to protect it fromtheelements.

Blade Holder Removal

WARNING

To avoid an accident that could result in death or serious injury, NEVER place your body under an unsupported cutter deck when servicing this Forestry Disc Mulcher. ONLY service the brush cutter on stable, even terrain. NEVER park on sloped terrain to avoid being struck and killed or seriously injured by the unexpected rolling or movement of the skid steer.

NOTICE

ALWAYS release the hydraulic system pressure from the auxiliary hydraulic circuit prior toremoving the blade holder.

AGT 1910.266 Appendix A – First-aid Kits

The first-aid kit information below was directly obtained from A G T regulations. Having a kit available at the job site is required by A G T for logging operations and is highly recommended by AGT Manufacturing.

The following list sets out the minimum acceptable quantity and type of first aid supplies for the first aid kit required under paragraph (d)(2) of the Standard of Practice. The contents of the first-aid kit listed should be adequate for small work sites, consisting of approximately two to three employees. When larger operations or multiple operations are being conducted at the same location, additional first-aid kits should be provided at the work site or additional quantities of supplies should be included in the first-aid kits:

1. Gauze pads (at least 4 x 4 inches).
2. Two large gauze pads (at least 8 x 10 inches).
3. Box adhesive bandages (band-aids).
4. One package gauze roller bandage at least 2 inches wide.
5. Two triangular bandages.
6. Wound cleaning agent such as sealed moistened towelettes.
7. Scissors.
8. At least one blanket.
9. Tweezers. 10. Adhesive tape.
10. Latex gloves.
11. Equipment such as resuscitation bag, airway, or pocket mask.
12. Two elastic wraps.
13. Splint.
14. Directions for requesting emergency assistance

Inspection Checklist

This checklist is to be completed prior to every use of the Forestry Disc Mulcher. DO NOT use a Forestry Disc Mulcher that fails inspection until it has been repaired.

Check for damaged hoses or hydraulic leaks. See hydraulic safety precautions in this manual. Grease all Imbrication points. See lubrication point diagram in this manual. Check the blade cutting edge. Note: minor blade damage will not affect the operation of theForestry Disc Mulcher. Dress with a grinder periodically. Check for cracked welds. Check for bent or damaged components. Check for damaged cylinder pins. Check for missing or loose fasteners (bolts, nuts, snap rings, etc.)

Safely Checking for Hydraulic Leaks

WARNING: There is significant risk of injection from the high pressure spray at hydraulic leaks

• The tremendous energy used to operate the machine and attachments can be storedinthe hydraulic system even when the machine engine is off.
• Very serious injuries from hydraulic fluid injection can seem insignificant at first. Often it can seem like a pin prick or tingling, but later it may require amputation. HIGH   PRESSURELEAKSARE

OFTEN INVISIBLE

Hydraulic system injuries can include:

• Burns from hot fluid
• Injection of hydraulic fluid
• Trauma from energized components or flailing lines

DO

Always Lock Out Tag Out machine controls before working on the machine or attachment. Always use the methods recommended by the manufacturer to block loader arms and other moving components to prevent accidental movement. Always use appropriate PPE (Personal Protective Equipment) when working on/around machinery. Take an approved safety course related to hydraulic systems. Local university extension programs and equipment dealers will offer training on hydraulic safety.

DONOT

DO NOT use your hands, or other body parts, to inspect for hydraulic leaks.
DO NOT position yourself in pinch pointswhen the machine has not been properly blocked, locked out and tagged out.
DO NOT “crack” a hydraulic fifi tting torelease hydraulic pressure. Severe risk of injection.
DO NOT tighten or loosen hydraulic components when the system is pressurized
DO NOT assume that the systemis depressurized.

Limited Warranty

The goal of agrotkindustrial.(“AGT”) warranty policy is to assure confidence, reducedowntime and minimize cost of ownership. Should you want to verify warranty, or should potential issues arise,please contact your authorized dealer or AGT’s Customer Service Team at service@agrotkindustrial.com, +1 913-244-6269 and we will strive to resolve any issues in a timely manner. AGT Attachments (“AGT”) offers a Limited Warranty on Shear, Grapple, and Puller Attachments delivered hereunder against faulty workmanship and use of defective materials for a period of twenty four (24) months from the date of shipment to the original purchaser from USA and/or USA Authorized Dealers. AGT offers a Limited Warranty on Saw Attachments against faulty design, material, and workmanship for normal use when properly maintained for a period of twelve (12) months from date of shipment. The Warranty for all products listed above and delivered hereunder to Rental users is for a period of six (6) months from the date of shipment to the original purchaser. Seller offers a Limited Warranty for miscellaneous parts and accessories such as cylinders, hoses, switches, valvesand wiring delivered hereunder against faulty workmanship and use of defective materials for a period of three (3) months from the date of shipment. This warranty does not include, andthere in hereby excludes, maintenance parts and consumables including but not limited to hydraulic fluid, oil, belts, teeth, blades, filters and other similar items. AGT offers a Limited Warranty on Auger Attachments against faulty design, material, and workmanship for normal use when properly maintained. Auger Gearboxes are warranted for a period  of sixty (60) months from date of shipment, Auger Motors are warranted for twenty four (24) months from date of shipment.Auger Bits, Frames and Cradles are warranted for a period of twelve (12) months from date of shipment.Refer to the Product Manual for proper maintenance procedures.Spare, Replacement and After Warranty Parts including hoses and components are warranted for three (3) months. AGT Auger Teeth, Pilots, Adaptors and Extensions are manufactured withapatented design to interface with AGT Auger attachments extensions and adaptors.The useof attachments other than AGT Auger Teeth, Pilots, attachments, extensions and/or adaptors, will void all warranty on Auger Drive and Bits.The use of AGT adaptors on unapproved attachments is not sanctioned.A “home-made” or non-standard attachment outside the specifications for the machine.

References

• Home | Occupational Safety and Health Administration
• 1910.266 App A - First-aid Kits (Mandatory) | Occupational Safety and Health Administration
• agrotkindustrial

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>