VIOLANTA QP-R30T Charging Cart User Manual
- October 30, 2023
- VIOLANTA
Table of Contents
VIOLANTA QP-R30T Charging Cart Manual
1. Power Switch / Timer control / UV
2. UV disinfection lamp
3. Cabinet Locker
4. Stand Wheel with lock
5. Power Interface
6. Cooling fan
7. PDU AC port
8. handle(optional)
9. Leakage Protective Switch
10. Cooling fan
11. Stand Wheel
Package Contents
- AC Power Cable
- Handle(optional)
- 2 Front Door Keys
- 1 Side Door Key
- Instruction Booklet
Tips : Before start using this product, please read the instructions carefully Please strictly follow the instructions for installation, application and maintenance. We will not be responsible for any damage caused by the wrong operation.
Product Specs
Using the Charging Cart
Smart Digital Control Panel
New control panel smart switch operation instruction
Charging setting:
Please press power button, it will start to work.
UV-C disinfection setting:
Please press power button, it will start to charge. It supports UV and
charging to work same time. UV-C will auto turn off after 5 min, charge will
keep work, according to charging timer setting.
Local time setting:
Please press SET twice, when number is shining, you can press UP or DOWN
buttons to adjust, if set it well please press set once time.
Lock/unlock keys setting:
Please press UP button long time like 3-4 seconds, and can listen a “Di”.
Unlock is the same.
Charging time setting:
Please press SET button, it will display C01, C02… C24. Number means it will
charge hours. For example, C01 means it will charge 1 hour, C02 means it will
charge 2 hours… C24 means it will charge 24 hours. If you set 1 hour, they
will charge with in 1 hour, it will stop charging over 1 hour.
Safety promise
The following products strictly obey the Iaw on national electrical product
regulations and we promise to assume corresponding responsibility .
Safety precautions Before Use and Maintenance
Please check and confirm the following conditions before operation
- Power outlet must connect with the ground to avoid electric leakage.
- The cabinet must be Iocated in a suitable storage . The wheels must be Iocked to avoid any movement .
- In order to prolong life cycle , avoid rain and direct sunlight . Do not store the Cabinet next to WindoW .
- Before moving , release the Iock on the wheels .
- Avoid pouring the water or alcohol directly onto the cabinet when cleaning . Liquidm damage internal circuits .
- For long term storage , remember to unplug the power cable and put a dust Cover over the Cabinet .
- Only qualified personnels are permitted to service the cabinet . Always unplug power cable before proceeding .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>