Promo Qi WXC-5W-01 Power Disc 5W Wireless Charger Instruction Manual

Promo Qi WXC-5W-01 Power Disc 5W Wireless Charger

READ ALL INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THIS MANUAL.

In the Box

• WXC-5W-01 Power Disc 5W Wireless Charger (x1)
• Charging Cable (x1)
• Instruction Manual (x1)

Safety Precautions

• This product is NOT a toy, keep away from children and pets.
• Only use the device according to the instructions in this manual.
• Never use the device for anything other than its intended purpose.
• Do not open this device or attempt to repair the unit yourself if it is not ‘NOrking property. Doing so risks fire, shock or injury.
• When not in use, the device should be stored in a dry, cool location, away from sources of water or heat.
• Do not expose device or power cable to extreme temperatures (heat or cold), open flames, humid or wet conditions.
• Do not submerge in water. Do not use in a location where the device or JX)’Ner cable could fall into liquid.
• Unplug the charging cable when not in use. Do not pull the charging cable to disconnect, or use the cable as a handle.
• Do not use if device or charging cable is damaged. If device or charging cable is damaged, it MUST be serviced or replaced by the manufacturer or its service agent before using again.
• Attachments on the back of your device can impede effectiveness of the wireless charger, and lead to overheating. Remove attachments from your device before charging on this wireless charger.

Product

Wireless Charging Instruction

• Plug the provided charging cable into the Micro use input port on the back of the wireless charger.
• Plug the other end of the cable into a use power source, such as the use port on a computer or into a certified use adapter (not included), and plug into a wall socket.
• The LED indicator will flash, then glow RED to indicate the wireless charger is in standby mode and ready to begin charge.
• Place a wireless charging enabled mobile device on the wireless charging surface, the mobile device will begin to charge automatically.
• The LED indicator will tum BWE to indicate that your device is charging property.
• If your device does not begin to charge, try repositioning your device on the wireless charging surface. You may need to remove the case of your device to charge property.
• Remove your device from the wireless charging surface when it is fully charged.
• Note:  ff the LED indicator is flashing when the Mre/ess charger is in use. either the device is NOT Mre/ess charging enabled, or there is an object between the device and charging pad interfering with the charging process.

Note on Safety Feature

The wireless charging will automatically power OFF when the wireless charging surface is overheated, or when a metal object, such as a coin, is placed on the wireless charging surface. The LED indicator will flash RED to warn of automatic shutoff.

Tech Specification

• Power Input: DC 5V/1.5A
• Wireless Charging Output: 5W
• Working Temperature: 32″F -122°F (0°C – S0°C)

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class e digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause hannful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receMng antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure.

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>