Westfalia 500/750 T 3 Pcs Telescopic Electric Garden Set Instruction Manual

June 10, 2024
Westfalia

Westfalia-logo

Westfalia 500/750 T 3 Pcs Telescopic Electric Garden Set

Westfalia-500-750 -T-3-Pcs-Telescopic-Electric-Garden-Set-product-
image

Product Information

The 3 Pcs Telescopic Electric Garden Set GM EMT 500/750 T Art. 95 98 89 is a gardening tool set that includes a hedge trimmer and a chainsaw. The hedge trimmer has a cutting length of 410 mm and a  tooth spacing of 18 mm. The chainsaw has a guide bar of 350 mm and a chain speed of 8 m/s. The set comes with a carrying strap for easy transportation. The tool has a protection class rating and weighs 4 kg including the handle.

Specifications

  • Nominal Speed: 500/750 T
  • Rated Voltage: 230V~50Hz
  • Rated Frequency: 50 Hz
  • Rated Power: 500/750 W
  • Protection Class: Class II
  • Weight + Handle Weight: 4 kg

Product Usage Instructions

  1. Put on the tool by attaching it securely to the end of the telescopic handle.
  2. Hook in the tether strap to ensure the tool stays close to your body.
  3. Pivot the hedge trimmer to the desired angle for cutting.
  4. Press the switch to turn on the tool.
  5. Try to minimize the impact of vibration and noise by wearing gloves while using the tool, limiting working time, and using accessories in good condition.

Note: The declared vibration total value and noise emission values have been measured in accordance with standard test methods and may be used for comparing this tool with others. However, the actual vibration and noise emission during use may differ depending on the ways in which the tool is used and the workpiece being machined. It is necessary to identify safety measures to protect the operator based on an estimation of exposure in the actual conditions of use.

Product Parts

1 Hedge trimmer
2  Lock
3 Mains plug
4 Handle with switch
5  Carrying strap
6 Locking telescopic handle
7 Chain tensioner
8 Oil tank

TECHNICAL DATA (High pruner)

Nominal Speed 5800 min-1
Chain Speed 11 m/s
Rated Voltage 230 V ~
Rated Frequency 50 Hz
Rated Power 750 W
Protection Class II
Weight + Handle 3090 g
Weight 1900 g
Sound Pressure Level LpA = 93 dB(A) KpA = 3 dB(A)
Sound Power Level LwA = 100 dB(A) KwA = 3 dB(A)
Hand Arm Vibration ah = 2,2 m/s² K = 1,5 m/s²
Operating Height 2,15 m
Oil Tank Capacity 90 ml
Guide Bar 270 mm (8“) 0,05“ = 1.3 mm (M1500836- 1041TL)
Saw Chain Titan 3/8“LP-050“-36 (Art. 95 07 56)
Cable Lenght 350 mm

TECHNICAL DATA (Hedge trimmer)

Nominal Speed 1600 min-1
Rated Voltage 230 V ~
Rated Frequency 50 Hz
Rated Power 500 W
Protection Class II
Weight + Handle 3490 g
Weight 2390 g
Sound Pressure Level LpA = 84 dB(A) KpA = 3 dB(A)
Sound Power Level LwA = 92 dB(A) KwA = 3 dB(A)
Hand Arm Vibration ah = 4,88 m/s² K = 1,5 m/s²
Tooth spacing 18 mm
Max. Cutting Thickness 18 mm
Blade Bar Length 460 mm
Max. Cutting Length 410 mm
Cable Lenght 350 mm

The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning!
The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined.
It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessories in good condition.

Westfalia-500-750 -T-3-Pcs-Telescopic-Electric-Garden-
Set-2

Westfalia-500-750 -T-3-Pcs-Telescopic-Electric-Garden-
Set-4

Westfalia-500-750 -T-3-Pcs-Telescopic-Electric-Garden-
Set-6

| 1| Unbox device
---|---|---
| 2| Putting on the tool
3| Telescoping
| 4| Hook in tether strap
5| Pivoting the hedge trimmer
| 6| Fill oil tank
7| Change saw chain
| 8| Tension saw chain
9| Lambing
| 10| Switch on

SYMBOLS

Westfalia-500-750 -T-3-Pcs-Telescopic-Electric-Garden-
Set-10

  • Attention! Observe the warning notes.
  • Attention! Beware of falling objects.
  • Attention! Do not grasp into the cutting bar resp. the saw chain during work.
  • Immediately unplug the power cord from mains, if the cord cable is damaged or cut.
  • Wear head, eye and hearing protection.
  • Attention! Make sure uninvolved person cannot be injured by objects thrown from the garden tool during work.
  • Wear protective gloves.
  • Wear sturdy shoes.
  • Protect the device from rain.
  • Keep a distance of at least 15 m to uninvolved persons.
  • Do not cut in the vicinity to power lines. Keep a distance of at least 15 m to voltage-carrying lines.

SAFETY NOTES

Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury.

  • Please note all warning symbols. The symbols indicate instructions which are important for safety reasons. Always observe these instructions as failure to do so could result in serious injury!
  • Keep the manual always ready to hand when working with the electric garden tool.
  • Children and persons with limited physical, sensorial or mental abilities are not allowed to use the garden tool. The electric garden tool may only be operated by briefed persons.
  • Keep bystanders and animals out of the work area. Bystanders should keep a minimum distance of 15 m when you start or operate the garden tool.
  • Do not use the unit when your reactivity is affected by alcohol consumption, medication, drugs, illness or when you are tired. One moment of inattention when operating the unit can cause severe injuries.
  • Do not use the garden tool as a lever for lifting, moving or splitting objects.
  • Observe all accident prevention regulations.
  • Cutting with the electric garden tool when standing on a ladder, in a tree or in any other instable places in not allowed. Always make sure you stand on a firm base and cannot loose balance when using the electric garden tool.
  • Always inspect the electric garden tool before each use for worn, loose, or damaged parts. Never operate a garden tool that is damaged, improperly adjusted, or is not completely and securely assembled.
  • While clearing the area around the tree, arrange a good foothold and a secure retreat path from falling branches and limbs.
  • Make sure that the attachment stops moving when the switch is released. First shut off the garden tool and then set it down.
  • The garden tool may only be used by one person at a time. Make sure bystanders or animals are not in the garden tool’s area of swing.
  • Make sure the garden tool is not touching anything and moving free when starting the engine. Keep all parts of your body away from the cutting attachments while the engine is running. Keep the handles dry, clean and free of oil.
  • Use only original accessories and original replacement parts.
  • Use extreme caution when cutting small size brushes and saplings because flexible material can be jammed in the saw chain and whipped towards your body to cause injuries or pull you off balance.
  • Do not modify the electric garden tool in any way.
  • Do not carry the garden tool with the attachments facing forward.
  • Protect the electric garden tool from moisture.
  • Should the electric garden tool become damaged do not use it and have it repaired by a professional or contact our customer support department. Do not disassemble the garden tool or try repairing it yourself.

Electrical Safety

  • Make sure the power cord cannot get into the cutting area. Keep the cord away from oil, heat and sharp edges.
  • Never carry the gardening tool by the cord and always grasp the plug to unplug from the wall socket. Carry the gardening tool by the handle when the cutting bare is idle. Always fit the blade protection when carrying or storing the gardening tool. Careful handling with the tool reduces the risk of injury.
  • Do not pull the gardening tool by the cord. Make sure the power cord cannot get caught in any way.
  • When cleaning, maintaining and not in use always switch off and disconnect from power mains. Use only extension cables which are approved for outdoor operation. Use approvable extension cable with a cable quality of H07RN-F; 3×1.5 mm2. Ask your electrician.
  • For using the gardening tool, we recommend the use of an RCD with a residual current < 30 mA. In Switzerland the utilization of an RCD is obligatory.

Safety Precautions against Kickback and Pushback
Always keep the saw chain sharp. This will ensure a high level of safety against kickback and throwback. Removal of any safety devices, inadequate maintenance or incorrect mounting of the guide bar and saw chain will increase the safety risk and lead to serious injuries due to kickback.
For safety reasons do not use any other saw chain or guide bar types not specified in this manual.

  • Kickback is the upward motion of the guide bar that occurs when the saw chain tip contacts a hard object. Kickback is dangerous and can lead to loss of control of the device.
  • Before cutting logs, secured in position. When working on sloping ground, make sure to work facing upwards.

Personal Safety Equipment

  • When working with the electric garden tool, wear eye protection, protective gloves and hearing protection. Wear cut-proof and tight-fitting clothes and safety boots. When working with the saw wear protective head gear.
  • Even in case of appropriate use of the chain saw some risk remains. Potential human health hazards can be:
    Cuts due to contact with an unprotected saw chain or when touching a moving saw chain or the cutter bar of the hedge trimmer.

EC DECLARATION OF CONFORMITY

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen,
declare by our own responsibility that the product
3 Pcs Telescopic Electric Garden Set GM EMT 500/750 T
Article No. 95 98 89
is according to the basic requirements, which are defined in the European Directives and their amendments.

  • 2011/65/EU
    Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

  • 2014/30/EU
    Electromagnetic Compatibility (EMC)
    EN IEC 55014-1:2021,EN IEC 55014-2:2021
    EN IEC 61000-3-2:2019+A1, EN 61000-3-3:2013+A2

  • 2006/42/EC
    Machinery
    EC-Type Examination No. BM 5049095 0001
    (TÜV Rheinland LGA Products GmbH, Tillystraße 2, 90431 Nürnberg, Germany, Identification No. 0197)
    EN 62841-1:2015+AC, EN 62841-4-2:2019, EN ISO 12100:2010, EN ISO 11680-1:2011

  • 2000/14/EG
    The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany.
    Hagen, 20th of December, 2022

CUSTOMER SERVICES

DEUTSCHLAND
Westfalia Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de

SCHWEIZ
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch

ÖSTERREICH
Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at

DISPOSAL

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.
© Westfalia 12/22

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Westfalia User Manuals

Related Manuals