infobit iTrans DU-TR-22A USB A to Dante Transceiver User Manual
- June 10, 2024
- infobit
Table of Contents
infobit iTrans DU-TR-22A USB A to Dante Transceiver
iTrans DU-TR-22A
The iTrans DU-TR-22A is a USB A to Dante Transceiver designed to provide reliable and high-quality audio transmission between devices. It is equipped with a USB and a DU22 RJ45 connector that supports Dante IP AES67 RTP audio and USB 2.0 network transmission. The device operates at a sampling rate of 48kHz and a bit depth of 24bit, providing excellent sound quality.
Safety
It is essential to follow the safety guidelines to ensure the reliable use of the equipment and the safety of personnel. Please observe the following during installation, use, and maintenance:
- Ensure that the earth wire in the power cable is well grounded during installation.
- Keep the working environment well ventilated to avoid damage caused by heat generated during operation.
- Turn off the main power supply in a humid and dewy environment or when it is not in use for an extended period.
- Always unplug the AC power cord from the power supply socket before removing or reassembling any part of the appliance or disconnecting/reconnecting any electrical plugs or connections to the appliance.
- Do not dismantle the appliance without permission from a non-specialist to avoid the risk of electric shock.
- Do not spill any corrosive chemicals or liquids on or near the appliance.
Usage
Follow these instructions to use the iTrans DU-TR-22A:
- Connect one end of a standard USB cable to the USB A connector on the iTrans DU-TR-22A and the other end to your computer or other USB-enabled device.
- Connect the DU22 RJ45 connector on the iTrans DU-TR-22A to your Dante network.
- Ensure that the iTrans DU-TR-22A is powered on and connected correctly.
- Configure the iTrans DU-TR-22A using Dante Controller software or any other compatible configuration software.
- Start transmitting audio data between devices.
For more information or support, please visit www.infobitav.com or contact us at info@infobitav.com.
Thanks for choosing our iTrans DU-TR-22A, this guide will take you know how to use this product.
Safety
To ensure reliable use of the equipment and the safety of personnel, please observe the following during installation, use, and maintenance.
- When installing the equipment, ensure that the earth wire in the power cable is well grounded.
- Keep the working environment well ventilated so that the heat generated by the equipment during operation can be discharged in time to avoid damage.
- Turn off the main power supply in a humid and dewy environment or when it is not in use for a long time.
- Always unplug the AC power cord from the power supply socket before the following operations.
- A. Remove or reassemble any part of the appliance.
- B. Disconnect or reconnect any electrical plugs or connections to the appliance.
- Do not dismantle the appliance without permission from a non-specialist to avoid the risk of electric shock.
- Do not spill any corrosive chemicals or liquids on or near the appliance.
OVERVIEW
Specification
| Model | DU22 |
|---|---|
| Connector | RJ45 x 1 |
USB A x 1
Power supply| USB
Sampling Rate| 48kHz
Bit Depth| 24bit
Latency
| 1, 2 or 5ms
Dante Controller Configuration
Network transmission| Dante IP AES67 RTP audio
USB| USB2.0
www.infobitav.com
info@infobitav.com
INFOBIT AV