Anker AK-T1424012 Pen Flashlight User Manual
- June 10, 2024
- Anker
Table of Contents
Anker AK-T1424012 Pen Flashlight
Specifications
- Special Feature Durable, Lightweight, Premium, Rechargeable
- Color Black
- Power Source Battery Powered
- Light Source Type LED
- Material Aluminum
- Included Components USB Cable
- Product Dimensions 2.2″D x 0.8″W x 5″H
- Battery Cell Composition NiMH
- Item Weight 0.17 Pounds
- Number Of Batteries 1 Lithium-Ion batteries required. (included)
- Item Model Number AK-T1424012
Description
The Anker AK-T1424012 Bolder P2 LED Pen Flashlight is a portable lighting solution that is small and adaptable and provides tremendous illumination. The Bolder P2 LED Pen Flashlight is made by Anker, a trusted name in high-quality electronics and accessories, and is designed to deliver dependable performance for a range of illumination requirements. The Bolder P2 is a portable lighting option for everyday use or emergency scenarios because to its pen-like form factor and light weight. It has a strong, elegant, and long-lasting aluminum body that guarantees longevity. The Bolder P2’s high-intensity LED bulb produces a bright, well-focused beam of light. With the flashlight’s several lighting options, users can customize the brightness to suit their individual needs.
Due to its adaptability, it may be used for a variety of tasks, including reading in low light, checking tight spaces, and navigating in the dark. User convenience was considered during the creation of the Bolder P2 LED Pen Flashlight. It has a pocket clip for convenient access whenever needed and for secure attachment to garments or bags. Its small size makes it a convenient option for professionals, outdoor lovers, or anybody in need of dependable illumination on the go. It may also fit neatly in pockets or toolkits. The Bolder P2 is also powered by two AAA batteries, providing a longer battery life for continuous use. It also includes user-friendly controls, which are normally found on the flashlight’s body and allow for simple operation and quick access to several lighting modes.
Components
Features
Convenience Built In
By using any USB port to recharge the Bolder P2, you may avoid the inconvenience of having to buy new batteries.
Worry-Free Charging
The Bolder P2 includes a chip that was specifically designed to ensure that the batteries charge properly, resist deterioration, and prevent overheating.
Advanced Battery Tech
You get the maximum possible capacity, efficiency, dependability, and safety with the dual high-performance batteries.
All-Metal Body
A body made of extra-hard anodized aluminum improves grip, maintains a sleek appearance, and resists scratches and chipping.
Rechargeable
The Ni-MH battery provides power for up to 5.5 hours per charge.
How To Charge
- To reveal the charging port, lift or remove the rubber flap or cap.
- Connect the proper charging wire to the flashlight’s charging port. Depending on the model of torch, a different charging cord could be needed. It may be a proprietary charging cable, a micro-USB cable, a USB-C cable, etc.
- Connect the charging cable’s other end to a power supply, such as a USB wall adapter, laptop, or power bank.
- An indication light that indicates the charging process has started may turn on after the torch is connected to the power source. The light can flash or be a solid color to show the charging state.
How To Replace Batteries
- Depending on how the torch is made, unscrew the tail cap or the cover above the battery.
- Remove the old batteries, being sure to properly dispose of them in accordance with local laws.
- Place two fresh AAA batteries in the flashlight’s battery compartment, being careful to line up the positive (+) and negative (-) ends with the markings inside.
- Securely reinstall the battery compartment lid or the tail cap.
- Turn on the torch to check that the fresh batteries are functioning properly.
How To Clean
- The outer surfaces of the torch should be gently cleaned with a soft, lint-free cloth or microfiber cloth. As a result, grime, dust, and fingerprints will be removed. The finish of the torch can be harmed by using abrasive materials or harsh chemicals, so stay away from them.
- You can simply dampen the cloth with water or use a mild household cleaner for tough stains or grime. For the sake of keeping water from getting inside the torch, make sure the towel is not dripping wet. Wipe the impacted areas carefully and completely.
- Pay close attention to the area around the lens and reflector. To clean off any smudges or fingerprints from the lens, use a clean, dry cloth or lens cleaning cloth. Avoid damaging or scratching the lens surface.
- Use a soft-bristled brush or a cotton swab that has been lightly wet with water to clean any hard-to-reach crevices or spots. Make sure to get rid of any extra moisture to stop water from getting inside the torch.
- After cleaning is complete, let the torch air dry fully before putting it back together or adding batteries. By doing this, it will be certain that the torch is dry inside.
- Check that all parts of the torch are dry and free from moisture or cleaning residue before reassembling or using it.
FAQ’s
Is the Anker AK-T1424012 Bolder P2 LED Pen Flashlight waterproof?
The specific waterproof rating may vary depending on the model. It is advisable to check the product specifications or contact Anker customer support for information regarding the waterproof capabilities of the flashlight.
How long does the Anker Bolder P2 LED Pen Flashlight's battery last?
The battery life of the flashlight depends on the specific usage patterns, brightness settings, and battery capacity. It is recommended to refer to the product specifications or user manual for detailed information on battery life.
Can the flashlight's brightness be adjusted?
Yes, the Anker Bolder P2 LED Pen Flashlight typically offers multiple brightness settings. You can adjust the brightness level according to your needs or to conserve battery life.
Does the flashlight have a strobe or SOS mode?
Some models of the Anker Bolder P2 LED Pen Flashlight may feature strobe or SOS modes. These modes can be useful in emergencies or signaling situations. Refer to the product specifications or user manual to check if these modes are available on your specific flashlight model.
Can the flashlight be focused or have adjustable beam width?
The Anker Bolder P2 LED Pen Flashlight may or may not have an adjustable focus or beam width feature. It is recommended to check the product specifications or user manual to determine if this feature is available on your specific flashlight model.
How durable is the Anker AK-T1424012 Bolder P2 LED Pen Flashlight?
The flashlight is typically designed with durability in mind. It often features a sturdy aluminum body or other robust materials to withstand regular use and occasional impacts. However, the exact level of durability may vary between flashlight models.
Can the flashlight be used in extreme temperatures?
The operating temperature range of the Anker Bolder P2 LED Pen Flashlight may vary. It is best to consult the product specifications or user manual to determine the recommended temperature range for optimal performance.
Is the flashlight compatible with rechargeable batteries?
The compatibility with rechargeable batteries may depend on the specific flashlight model. It is advisable to refer to the product specifications or user manual to check if your flashlight supports the use of rechargeable batteries.
Does the flashlight have a pocket clip?
Yes, the Anker Bolder P2 LED Pen Flashlight often features a pocket clip for convenient storage and easy access. The pocket clip allows you to secure the flashlight to your pocket, bag, or belt.
Does the flashlight come with a warranty?
The warranty coverage for the Anker Bolder P2 LED Pen Flashlight may vary. It is recommended to check the warranty information provided by Anker or consult with their customer support for details regarding warranty coverage and duration.
How long does it take to charge an Anker flashlight?
Up to 6 hours (Medium-beam mode) of powerful, non-diminishing brightness from the included premium rechargeable 3350mAh battery. LEDs boast an extended 50000-hour lifespan. Recharge in just 6 hours with a 1A adapter (not included) and the included Micro USB cable.
How do I know when my Anker is fully charged?
If the battery is fully charged, the battery level indicators will light up and then turn off. The wireless charging indicator will stay on if a device is still being charged wirelessly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>