V-TAC VT-2427 LED Controller Instruction Manual
- June 10, 2024
- V TAC
Table of Contents
INSTALLATION INSTRUCTION
LED CONTROLLER
WEEE Number: 80133970
TECHNICAL DATA:
| Model | VT-2427 |
|---|---|
| Output | 2 Channels |
| Output Current | <6A |
| Output Power | 72-144W |
| Input Voltage | DC: 12V/24V |
| Dimension | 59.2x24x10mm |
| Remote Size | 86x40x7mm |
| Connection Mode | Common Anode |
| Network Connection | Powered on& off for 3 times and the light flashes quickly |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC LED CONTROLLER V-TAC will serve you
the best.
Please read these instructions carefully before starting the installation and
keep this manual handy for future reference. If you have any other query,
please contact our dealer or local vendor from whom you have purchased the
product. They are trained and ready to serve you at the best. The warranty is
valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and
installation of the product. The products are suitable for 10-12 Hours Daily
operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a certified person.
Caution, risk of electric shock.
****This marking indicates that this product should not be disposed of with
other household wastes.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
REMOTE FUNCTION
| OFF | ON | |
|---|---|---|
| Brightness – | Brightness + | |
| Warm white 30% | Warm white 60% | Warm white 100% |
| cool& warm mixed color | cool& warm mixed color | |
| cool white 30% | cool white 60% | cool white 100% |
NOTE:
When the key color is inconsistent with the strip light, the output sequence
can be adjusted by remote control: the controller is powered on, press the OFF
of remote, and then press continuously for 5 times. The strip light flashes
once, indicating that the adjustment is successful. Start up to determine
whether the output corresponds to the remote control key. If not, the above
steps should be repeated.
APP INSTALLATION
Step 2: Scan the given QR code, or download “V-TAC Smart Light’ from the App Store (iOS) or the Google Play Store (Android).
|
---|---
https://play.google.com/store/apps/details?id=com.vtac.smartlight|
https://itunes.apple.com/cn/app/v-tac-smart-light/id1406697927?l=en
&mt=8
Step 3: Open the V-TAC Smart Light app and tap on register for creating a new account.
Step 4:
A) Mobile Number: Select the country, then enter your mobile number. Once
done, tap ‘Next’.
B) E-Mail: Enter your email id and tap on ‘Next’.
Step 5: Enter the verification code which will be sent to your mobile number/email id, then assign a new password to your account and tap on “Confirm”.
Step 6: Tap on ‘Add Device’ or the + sign.
Make sure the lamp is switched on.
Step 7: Choose ‘Lighting’ to start pairing the light to the app.
Step 8: To pair the device with LED Smart Strip Light make sure the light
is blinks rapidly.
Once the light blinks rapidly, the light is in pairing mode. If the light is
not blinking rapidly, you can do one of the following steps:
A. Switch the light on & off repeatedly for 3 times, with short intervals of
less than 2 seconds.
B. Tap the ‘How to make light blink rapidly’ link (as shown on the image to
the right)
C. You can also enable pairing mode from the Wi-Fi controller. Press and hold
the ON/OFF button for 5-7 seconds and wait till you observe the light flashing.
Please refer to the instruction section “WI-FI CONTROLLER FUNCTIONS”
Network Modes:
- Smart Mode: Light flashes rapidly.
- AP mode: Slow flash, once every 2 seconds.
Confirm if the light blinks rapidly, select the Wi-Fi network, and enter the password.
Step 9: Once you have successfully completed
step 8, you will be redirected to below page, where the App searches,
registers and initializes the device(lamp) (ref image below)
Step 10: Once your device is successfully added, rename the device to your preference.
Step 11: After successfully pairing the Wi-Fi receiver with the app, you can start controlling multiple features of the lamp through your mobile– on/off switch, timing & schedules, and more.
ALEXA SETTINGS
Step1: Install the Amazon Alexa app via the App Store(iOS) or the Play Store (Android) and register. If you already have an existing account with Amazon Alexa, please proceed to logging in.
Step2: Once you are on the Amazon Alexa home page, tap on the lower right icon –– where the arrow is pointed–– to add a new device and skill.
Step3 : Tap on settings and tap on “skills and games” as shown below.
Step4: Search for ‘V-TAC Smart Light’ on the “Skills & Games” page as shown below.
Step5: Enable the Skill.
Step6: Enter your V-TAC Smart Light login ID and password and tap on “Link Now”
Step7: Once you tap on Link Now, you will be redirected to a new page requesting for authorization(Ref Image below). Tap on “Authorize”
Alexa by Amazon will be able to: Receive your public profile Control your devices over internet
Step8: You will receive confirmation of the account being linked successfully (Ref Image below)
What to do next:
→ Close this window to discover smart home devices you can control with Alexa.
Step9: Discover your smart device on Alexa. Once you have enabled the
skill
A) You can use voice command ”Alexa discover devices” to the Alexa device
which you have.
B) To add device manually on home page tap on and tap on Add device , select
the device which you are adding and tap on discover device.
Note: Discovering the device must be done every time the device’s name is changed on the app.
ALEXA Commands
Now, you can control your smart device using voice commands on Alexa. Below
are a few commands you can use:
➢ ! Alexa, turn on/off bedroom light.
➢ ! Alexa, set bedroom light to 50 percent.
THINGS TO REMEMBER BEFORE STARTING INSTALLATION:
- V-TAC Smart Light App & Amazon Alexa App
- Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
- Smart Device – Lamp
- Stable Wifi network
GOOGLE HOME SETTINGS
Step1:
a&b) Install the Google Home app via the App Store (iOS) or the Play Store
(Android) and register.
If you already have an existing account with Google Home, please proceed to
logging in.
c) Create a New Home/Choose from the existing home if any.
d) Power ON the Google Home device and connect it to the App.(Then Proceed to
step 2)
a. Welcome home
Your content and devices all in one place b. Choose account
This account will be used to personalize your experience
c Choose a home
You will be able to control the devices and services in this home. d. Plug
in your device
Make sure your device is nearby and connected to power, then try again
Step2: Once you are on the Google home page, tap on the Add “+” icon– to add a new device and skill. And then tap on Set up device as shown in below image.
Step3: Make sure the Smart Bulb is paired with V-TAC Smart Light app before starting step 3. Tap on the arrow section as highlighted in the below image.
Step5: Sign In with your V-TAC Smart Light Login credentials to Link the
Smart Light device
Step6: Tap on Authorize in order to proceed to linking the device.
Step7
a. Account will now be linked, please stay on the page you will be redirected
in few seconds to select the device to add to your home.
b. Select the device and tap on Next as show in image b.
Step8 : Select the Home where you would like to add the Smart Light under. (Or) you can create a New home in order to add the Smart Light to it.
Choose a home
You will be able to control the devices and services in this home.
Step9: You have succesfully added Smart Light device to your Google home
App.
Step10:
a. You can turn the Lamp On/OFF by taping on On/Off options as shown below.
(OR) You can tap on the Smart Lamp.
b. You will be redirected to page(as shown in image b) where you can control
the lights “Power and Dimmingfunctionality”.
Google Commands:
Now, you can control your smart device using voice commands on Google Home.
Below are a few commands you can use:
! OK Google, turn on/off bedroom light.
! OK Google, set bedroom light to 50 percent.
THINGS TO REMEMBER BEFORE STARTING INSTALLATION:
- V-TAC Smart Light App & Google Home App
- Make sure you have Google Home Device
- Smart Device – Lamp
- Stable Wifi network
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY
PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B