V-TAC VT-2433 3 In1 Wall Controller Instruction Manual

V-TAC VT-2433 3 In1 Wall Controller

TECHNICAL DATA

-10°C to +40°C

CONTROL DISTANCE| 30m
DIMENSION| 86x86mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of the product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation should only be done by a certified electrician.
3. For Indoor use only
4. Please check whether the voltage of the power supply is in accordance with the controller, and please check the connection of both the cathode and anode, otherwise the controller will be broken.
5. Please don’t connect wires with power on. Please turn it on again only when it is in the right connection and no short circuit.
6. Please do not use the controller in a place with a wide range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

• This marking indicates that this product should not be disposed of with other household wastes.
• Caution, risk of electric shock.

MULTI-LANGUAGE MANUAL QR CODE

• Please scan the QR code to access the manual in multiple languages.

FEATURES

• 16 Millions of colors to choose.
• Color temperature adjustable.
• Dim brightness / Saturation.
• 2.4G RF wireless transmission technology.
• Remote control Control distance 30m.
• Smartphone app control (2.4GHz gateway is needed).
• Support third-party voice control (2.4GHz gateway is needed).
• DMX512 controllable (DMX512 LED transmitter is needed).

PARTS OF DESCRIPTION

CONTROLLER FUNCTIONS

This controller is compatible with RGB, RGBW, and RGB+CCT versions. It will be an RGB+CCT version when you get it the first time.
Method of Switching RGB, RGBW, and RGB+CCT versions

1. When the light is OFF, long press the “ Mode ” and “ W ” buttons at the same time, and the controller will sound 3 times after 5 seconds, then it changes to the RGB version.
2. When the light is OFF, long press the “ W ” and “ ” buttons at the same time, and the controller will sound 4 times after 5 seconds, then it changes to the RGBW version.
3. When the light is OFF, long press the “ Mode ” and “ ” buttons at the same time, and the controller will sound 5 times after 5 seconds, then it changes to the RGB+CCT version.

BUTTON FUNCTIONS

1. Short press ON / OFF switching
2. Long press to turn on the night light while the light is on.
3. Short press twice to enter the learning code state (see 8, 9 for details) while the light is on. Press “ W ”, and switch to static white light mode.

• When the light is ON, press “ ”, and the light will be off automatically after 60 seconds.
• Touch the color ring, and choose the color you want.
• Touch the dimming slider to change the brightness from 1%~100%.
• Each mode has its own brightness value and saturation value (Static white light mode and dynamic white light gradual changing mode have no saturation ) function see details for P3 Mode table.

Mode

1. Press “ Mode ” shortly, and switch to the next mode; long press “ Mode ”, and switch the modes circularly, there are 12 kinds of modes. (PS, on the color light, press mode, and it will get to the first mode).
2. In the version of RGB+CCT, the white gradual changing mode means CCT gradual changing under static white mode.

S-

1. Slow the speed in the present dynamic mode. There is 5 class speed. Long press “ S- ”, and slow the speed continuously. When it gets to the slowest speed, “ S- ” will be invalid. (Dynamic mode see details for P3 Mode table.)
2. When the light is OFF, long press 5 seconds to turn OFF the indicating sound.

S+

1. Accelerate the speed in the present dynamic mode. There is 5 class speed. Long press “ S+ ”, and accelerate the speed continuously. When it gets to the fastest speed, “ S+ ” will be invalid. (Dynamic mode see details for P3 Mode table.)
2. When the light is OFF, long press 5 seconds to turn ON the indicating sound.

PWM HIGH FREQUENCY / LOW-FREQUENCY SWITCHING

Switch to high frequency (8KHz): on the condition of turning on the light

1. Short press the “OFF” button of the remote control once;
2. Short press the “ON” button of the remote control 5 times within 3 seconds, and the white light blinks 2 times quickly, indicating successfully.

Switch to low frequency (500Hz): on the condition of turning off the light

1. Short press the “ON” button of the remote control once;
2. Short press the “OFF” button of the remote control 5 times within 3 seconds, and the white light blinks 2 times slowly, indicating successfully.

P3 MODE TABLE 1 (DEFAULT)

(SPEED IS NOT ADJUSTABLE)

2| GREEN
3| BLUE

DYNAMIC MODE

| 4| MARDI GRAS|

ADJUSTABLE

5| AUTOMATIC COLOR CHANGE
6| SAM
7| GEMSTONE
8| TWILIGHT
9| AMERICAN
10| FAT TUESDAY
11| PARTY
12| SLOW COLOR SPLASH

P3 MODE TABLE 2 (NEED TO SWITCH MANUALLY)

STATE| NO| MODE| BRIGHTNESS / SATURATION /

SPEED

---|---|---|---
STATIC MODE (NOT APPLICABLE TO REMOTE CONTROLLER)| 1| RED| ADJUSTABLE

(SPEED IS NOT ADJUSTABLE)

2| GREEN
3| BLUE

DYNAMIC MODE

| 4| COLORS GRADUAL CHANGE| ADJUSTABLE SATURATION
5| WHITE LIGHT GRADUAL

CHANGE

| SATURATION IS NOT

ADJUSTABLE

6| RGB GRADUAL CHANGE|

ADJUSTABLE

7| SEVEN COLORS JUMP TO

CHANGE

8| JUMP TO CHANGE RANDOMLY
9| RED LIGHT GRADUAL CHANGE

+ FLASH 3 TIMES

10| GREENLIGHT GRADUAL

CHANGE + FLASH 3 TIMES

11| BLUE LIGHT GRADUAL CHANGE

+ FLASH 3 TIMES

12| WHITE LIGHT GRADUAL

CHANGE + FLASH 3 TIMES

DYNAMIC MODE TABLE SELECTION (REMOTE CONTROL ONLY)

• Select dynamic mode table 1: press “ ” 2 times continuously when the light is on, Within 3 seconds, press the ” S+ ” button of the remote control 5 times, and the blue light blinks 3 times slowly, indicating successfully.
• Select dynamic mode table 2: press “ ” 2 times continuously when the light is on, Within 3 seconds, press the ” S- ” button of the remote control 5 times, and the yellow light blinks 3 times slowly, indicating successfully.

LINKING/UNLINKING DEVICES

Compatible with the below devices (Not included; available to buy separately)

Light will work after linking with the remote control; for more details, please read the remote instruction.

REMOTE CONTROL LINKING/UNLINKING

Support all remote control to do Link/Unlink (see 7 for details)

LINK

• Press ” ” 2 times continuously when the light is on
• Press the remote control within 3 seconds “ ” key 3 times
• The light blink 3 times slowly means the linking is done successfully

UNLINK

• Press ” ” 2 times continuously when the light is on
• Press the remote control within 3 seconds “ ” key 5 times
• The light blink 10 times quickly means the unlinking successfully

If the link or unlink failed, please follow the above steps again.

DMX512 LED TRANSMITTER LINKING/UNLINKING

Compatible with DMX512 LED Transmitter (Not included. Can purchase outside)

1. Choose the zone for the controller by pressing ‘ + ’ or ‘ – ’ (e.g. ‘CH12’ means zone 12)

LINK

• Press “ ” 2 times continuously when the light is on
• Press the remote control within 3 seconds ” ” key 3 times
• The light blink 3 times slowly means the linking is done successfully

UNLINK

• Press ” ” 2 times continuously when the light is on
• Short press ” ” 5 times within 3 seconds
• The light blink 10 times quickly means the unlinking successfully

If the link or unlink failed, please follow the above steps again.

DMX512 LED TRANSMITTER CONNECTION DIAGRAM

SIGNAL TRANSMITTING
One strip controller can transmit the signals from the remote control to another controller within 30m, as long as there is a strip controller within 30m, the remote control distance can be limitless.

MODES SYNCHRONIZATION

Different controllers can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and within a 30m distance.

The same dynamic mode and the same speed can be synchronized.

• Signal to transmit & Modes synchronization.

INSTALLATION / DISMANTLEMENT

INSTALLATION INSTRUCTION

1. Install the bottom case into the wall; Above are the standard bottom cases.
2. Fix the controller base on the bottom case with a screw.
3. Clicks into the upper side of the glass panel on the controller base, then press the lower side slightly to make it clicks into the controller base.
4. Plug into the below bayonet with a screwdriver, and upwarp screwdriver, then you can dismantle the controller.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B.

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>