CREATIVE MF8225 iRoar Go Portable Bluetooth Speaker Instructions
- June 10, 2024
- Creative
Table of Contents
MF8225 iRoar Go Portable Bluetooth
Speaker Instructions
Safety & Regulatory Information
Read this instruction carefully and completely before using the product. Refer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product.
- Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
- Do not expose your product to water and moisture. If your product is moisture-resistant, take care and not to immerse in water or expose to rain.
- Charge products with built-in rechargeable batteries at ambient temperatures between 10 and 40°C/50 and 104°F
- When not using the product for extended periods of time, charge its built-in rechargeable battery regularly (about every 3 months).
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas
- Use only attachments/accessories/spare parts supplied or recommended by Creative
- Do not insert the earphones too deep into your ears and never insert them without ear adapters. Always remove the earphones slowly and carefully from your ears.
- Clean the product only with a soft, dry cloth.
- Do not dismantle or attempt to repair your product.
- Do not pierce, crush or set fire to your product
- Keep your product away from strong magnetic objects
- Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents. Swallowing and choking hazard.
Warning on Choking Hazard
This product and its accessories may contain small parts which must be kept
away from children.
WARNING
CHOKING HAZARD – Small Parts
Not for children under 3yrs.
Creative roar Go (MF8225) Additional Safety and Regulatory information
The following sections contain notices for various countries.
CAUTION: This product is intended for use with FCC/CE certified computer
equipment. Please check the equipment operating/installation manual and/or
with the equipment manufacturer to verify/confirm if your equipment is
suitable prior to the installation or use of the product.
Notice for USA
Federal Communication Commission (FCC) Interference Statement FCC Part 15:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if no installed and used in accordance with
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be installed with
computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded
and grounded. Operation with non-certified computers or non-shielded cables
may result in interference to radio or television reception.
MODIFICATION: Any changes or modifications not expressly approved by the
grantee of this device could void the user’s authority to operate the device.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Creative iRoar Go (MF8225) Additional Safety and Regulatory information
SUPPLIER’S DECLARATION OF CONFORMITY
According to CFR Title 47 §2.1077
Importer’s Name: Creative Labs, Inc.
Importer’s Address: 1900 McCarthy Boulevard, Suite 103, Milpitas, CA
95035 Tel: (408) 428 6058 / (408) 391 6961 declares under its sole
responsibility that the product
Trade Name: Creative
Model Numbers: MF8225
Product Name: Creative iRoar Go
has been tested according to the FCC / CISPR22 requirement for Class B devices
and found compliant with the following standards:
EMI/EMC: ANSI C63.4 & C63.10, FCC Part 15 Subpart B & C Complies with Canadian
ICES-003 Class B & RSS-247 standards
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesirable operation.
Creative iRoar Go (MF8225) Additional Safety and Regulatory information
European Compliance
This product complies with all applicable directives. A copy of the EU DoC is
available at Creative website.
CAUTION: To comply with the Europe CE requirement, this device must be
installed with CE certified computer equipment which meet with Class B limits.
All cables used to connect this device must be shielded, grounded and no
longer than 3m in length.
Operation with non-certified computers or incorrect cables may result in
interference to other devices or undesired effects to the product.
MODIFICATION: Any changes or modifications not expressly approved by Creative
Technology Limited or one of its affiliated companies could void the user’s
warranty and guarantee rights. The insulating coating on the device also
serves the purpose of ESD protection.
Vietnam RoHS Statement
This product is in compliance with Circular 30/2011/TTBCT of the Ministry
of Trade of the Socialist
Republic of Vietnam (“Circular”), it does not contain the following substances
in concentration greater than the Maximum Limit value as specified in the
Circular.
Substance: Maximum Limit (ppm)1, 2
lead: | 1000 |
---|---|
mercury | 1000 |
cadmium | 100 |
hexavalent chromium | 1000 |
polybrominated biphenyls (PBB) | 1000 |
polybrominated diphenyl ethers (PBDE) | 1000 |
1Maximum Limit does not apply to applications exempted from the Circular.
2Maximum Limit refers to concentration by weight in homogeneous materials.
Notice for Australia
Notice for Malaysia
Notice for Singapore
Creative iRoar Go (MF8225) Additional Safety and Regulatory information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>